#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Cable Tray Mounting Supports and Hardware

When establishing an organized, professional cable network, sometimes it’s the little things that matter. Primus Cable carries the mounting supports and hardware pieces to accommodate your cable management system. We offer a wide selection of wire cable tray support kits, brackets, dividers, covers, and hardware. Primus Cable also provides a wide selection of wire cable trays to organize your network.

The PRO-10 Straight Section Wire Cable Tray is made of an innovative steel mesh design with built-in splice/bonding loops. This design enables efficient, quick installation, which costs less labor and materials. This cable tray measure 5’ long, by 2’ deep, and can be easily configured around obstacles. Primus Cable’s cable trays for straight sections are available in sections from 1’ to 10’ in length, and from 2” to 6” in depth. Ultimately, our cable trays will save you money.

Another cable tray component is the PRO-10 Wire Cable Tray 12” Drop, including three sections intended to route cable from trays of varying heights. This unit is easy to configure to fit around obstacles, and comes in 12”, 18”, and 24” drop sizes. The depth of these wire cable trays varies from 2” to 6”. The straight sections and fittings address a wide range of applications.

Primus Cable supplies end-to-end cable networking products besides cable trays; we offer a fine selection of cable management J-Hooks as well. A popular cable management item is the multi-purpose 2” Standard Steel J-Hook. This J-Hook is a size 32 that supports up to 17 pounds.

Ideal for stress free cable support for above suspended ceilings, and below raised floors. It’s also great for the home garage and workshop. You can rest assured you’re getting quality product from Primus Cable, our J-Hooks are UL & CUL listed. We have standard steel J-Hooks available in ¾”, 1 5/16”, 2”, and 4” sizes.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-19 of 19
Show
Wire Cable Tray Center Support Kit

Price: $10.48-$13.55
View
Availability: Made to Order
Wiremaid Item #: NPNB-05-5002-XX -

    1⁄4” Threaded Rod KitThis center support kit is made to suspend our wire cable trays from the ceiling using a 0.25" threaded rod.Includes:(1) support bracket(1) hold down bracket(2) 1⁄4” flat washers(2) 1⁄4” nuts(1) 6” silicone protective tubesAll mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware. ...

    Wire Cable Tray Trapeze Support Kit

    Price: $9.90
    View
    Availability: Made to Order
    Wiremaid Item #: NPNB-05-5206-XX -

      1/4” Threaded Rod KitThis trapeze support kit is made to suspend our wire cable trays from the ceiling using two 0.25" threaded rods.Includes:(1) support bracket(1) hold down bracket(2) 1⁄4” finned nuts(4) 1⁄4” flat washers(4) 1⁄4” nutsAll mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware. ...

      Wire Cable Tray Floor Support Kit

      Price: $6.96
      View
      Availability: Made to Order
      Wiremaid Item #: NPNB-05-5602-X -

        Raised Floor Support Kit for Wire Cable TraysThis under floor support kit is a free standing support for our wire cable trays for use under raised flooring and is used to secure tray sections to all supports. Material is steel wire powder coated 4” long and availible in various colors. Hold down included with all wall, floor, and ceiling supports. Order extras only.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or...

        Wire Cable Tray Wall Mount Support Kit

        Price: $6.96
        View
        Availability: Made to Order
        Wiremaid Item #: CM-W5-5053-2 -

          Wall Mount Support Kit for Wire Cable TraysThis wall mount support kit is to be used with our wire cable trays for wall mounting applications.All mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware.

          Wire Cable Tray L Support Bracket

          Price: $7.19
          View
          Availability: Made to Order
          Wiremaid Item #: NPNB-05-CM18-04201 -

            L-Support Bracket for Wire Cable TraysThis L support bracket provides support for wire cable trays without the use of a threaded rod.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support.

            Wire Cable Tray C Support Bracket

            Price: $7.66
            View
            Availability: Made to Order
            Wiremaid Item #: CM-W5-5107-6 -

              C-Support Bracket for Wire Cable TraysThis C support bracket provides support for wire cable trays without the use of a threaded rod.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support.

              Wire Cable Tray Angle Pedestal Support Kit

              Price: $24.60
              View
              Availability: Made to Order
              Wiremaid Item #: NPNB-05-CM74-3 -

                Angle Pedestal Support Kit for Wire Cable TraysThe angle pedestal support kit mounts to the vertical legs of a raised floor system and provides flat surface for cable tray to sit on.Includes(2) Angle Supports(2) "U" clamps. Clamps fit up to a 1-1/2” diameter pedestalAll mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support. ...

                Wire Cable Tray Pedestal Bridge Support Kit

                Price: $19.43
                View
                Availability: Made to Order
                Wiremaid Item #: NPNB-05-CM75-3 -

                  Pedestal Bridge Support Kit for Wire Cable TraysThe pedestal bridge support kit is a cable tray "hammock" and spans between two raised flooring legs for the cable tray to rest on.Includes (1) Bridge Support (spans 24 inch center to center floor pedestals up to 1-1/2" diameter)(2) "U" clampsAll mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support. ...

                  Wire Cable Tray Cover

                  Price: CALL
                  View
                  Availability: Call for Pricing
                  Wiremaid Item #: NPNB-05-CM21-04 -

                    Cover for Wire Cable Trays Wire cable tray covers prevent build up of dust and particles on cabling while protecting cables from being crushed by items that may fall into cable trays. Available in 7 standard colors for color-coding cable tray installations: Safety Yellow, White, Chrome, Black , Red, Blue, and Orange.Powder coated to provide a smooth protective surface for cables.Can be supplied pre-assembled to cable trays or installed in the field. #05-2-500985 Splice Washer Assembly,...

                    Pressed Beam Clamp

                    Price: $0.99-$3.73
                    View
                    Availability: In Stock
                    Primus Cable Item #: JH-####-BC -

                      Pressed Beam Clamp Zinc-plated steel Pressed Beam Clamp for flanges up to 1/2" or 3/4" thick such as I-beams. Secure the Pressed Beam Clamp to a beam flange with the included bolt. The Pressed Beam Clamp is ideal for hanging ceiling wires. High quality all steel construction. Has both threaded and non-threaded holes to accommodate jack chain, ceiling wire, or threaded rod.

                      Wire Cable Tray Solid Bottom Plate

                      Price: CALL
                      View
                      Availability: Call for Pricing
                      Wiremaid Item #: NPNB-05-2-06BP -

                        Solid Bottom Plate for Wire Cable Trays Wire cable tray solid bottom plates provide a flat surface to make installing and pulling cables much easier. Because of the smooth surface cables can slide across it with ease not allowing cables to get caught within the wire frame. The Solid Bottoms are used primarily for instrumental control, communication and other non-heat producing cable.Powder coated to provide a smooth protective surface for cable pullingCan be supplied pre-assembled to cable...

                        Wire Cable Tray Divider

                        Price: CALL
                        View
                        Availability: Call for Pricing
                        Wiremaid Item #: NPNB-05-2-500983 -

                          Tray Divider for Wire Cable Trays Wire cable tray dividers help route cables to different locations inside a single cable tray. Dividers are made from powder coated steel and are 5’ long. (Two Splice Washer Assembly Kits used to secure to each tray section included)

                          Wire Cable Tray Hold Down Bracket

                          Price: $2.60
                          View
                          Availability: Made to Order
                          Wiremaid Item #: NPNB-05-2-500982 -

                            Hold Down Bracket for Wire Cable TraysHold down brackets are used to secure wire cable tray sections to all supports. Material is steel wire powder coated chrome color 4” long.

                            Wire Cable Tray Splice Washer Kit

                            Price: $1.31
                            View
                            Availability: Made to Order
                            Wiremaid Item #: CM-W5-5422 -

                              Splice Washer Kit for Wire Cable TraysThe cable tray straight and junction sections are easily joined together using installer-friendly splice washer kits. The kit contains one 1/4”- 20 bolt washer, one splice washer, and one flanged hex nut. Material is zinc plated steel.

                              Wire Cable Tray Waterfall

                              Price: $9.78
                              View
                              Availability: Made to Order
                              Wiremaid Item #: CM-W5-5095-X -

                                Waterfall for Wire Cable TraysWaterfalls attach to wire cable trays to help direct cables to their intended destinations.Dimensions: 4.125"H x 3.75"W x 6.1875"L (other widths available upon request)

                                Wire Cable Tray Extension Offset Loop

                                Price: $2.49
                                View
                                Availability: Made to Order
                                Wiremaid Item #: NPNB-05-CM58 -

                                  Tray Extension Offset Loop for Wire Cable TraysDuring some installations, there may be sections that do not meet. The offset loop was designed for this. The offset loops bolt to the existing loops on the tray. When attached to both ends of a section, a lateral adjustment of up to 12” is possible. To adjust, slide the cable trays, fittings or offset loops to meet and then tighten the flange hex nuts.

                                  Wire Cable Tray Universal Loop

                                  Price: $2.49
                                  View
                                  Availability: Made to Order
                                  Wiremaid Item #: NPNB-05-CM7002 -

                                    Universal Loop for Wire Cable TraysThe universal loop is to be used in conjunction with the extension offset loop for a slight vertical offset.

                                    Wire Cable Tray Coupling Nut

                                    Price: $0.72
                                    View
                                    Availability: Made to Order
                                    Wiremaid Item #: NPNB-05-CM60 -

                                      Coupling Nut Coupling nut for assembling wire cable trays and are threaded fastener for joining two male threads, most commonly threaded rod. The outside of the fastener is hex so a wrench can hold it. These Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods. The rods are threaded into the coupling nut for certain distance and are available in 1/4"-20 and 3/8"-16.

                                      Cable Hanging Tool for Magnetic J-Hooks and Bridle Rings wire cable tray, cable management, wire cable basket, beam clamp

                                      Price: $5.78
                                      View
                                      Availability: In Stock
                                      Mag Daddy Item #: TL10-1815 -

                                        Cable Hanging Tool for Magnetic Cable Management Hardware The Cable Hanging Tool is used to safely install magnetic cable management solutions like J-Hooks, bridle rings, and cable holder brackets. The tool can be attached to an extension pole to install cable management devices from the safety of the ground. Will fit with 1/4" rods or extension poles.