#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Tone and Probe

Alarm Tone Generators and Cable Testers

This section includes alarm tone generators and cable testers designed for verifying security cable. Tone and probe kits function with both active and inactive cable runs, and can be used to map devices on a network.

The Network Cable Tester, LAN Tone & Probe Tracing Kit is ideal for data, telco, security, audio, and CATV wiring. The alarm tone generator sends a tone while blinking hub, switch port, and PC activity lights for quick identification. It has two tone outputs for multiple line identification, continuity testing, polarity indication, and eight position modular breakout tabs.

Primus Cable also provides the Network Cable Tester, Multi-Filter Tone Probe from Greenlee. This alarm cable tester is easy to use with one-handed, single button, battery powered operation. It traces wires within a group without damaging insulation. The digital signal processor of this alarm cable tester provides fast and accurate pair tracing, and the unit is durable and lightweight.

Make sure you have all the necessary Networking Tools before your next cable installation or maintenance project. Cable cutters, strippers, crimpers… Primus Cable has it all! We offer a wide selection of precise, durable tools to help you get the job done on time and under budget.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-11 of 11
Show
Alarm Cable Tester, Alarm/Security Tone & Probe Tracing Kit

Price: $176.56
View
Availability: Min. Qty. Order
Greenlee Item #: NPNB-620K -

    Greenlee 620K Alarm/Security Tone & Probe Tracing Kit The Greenlee 620K Alarm/Security Tone & Probe Tracing Kit is designed specifically for the security and alarm industry. It provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote locations. Use the patented inductive amplifier with any tone generator to identify and trace wire pairs or single conductors within a group without damaging insulation. The Greenlee 602K Kit features...

    BNC Adapter Kit for 4Mapper™ Coax Cable Tester  coax cable tester, 4mapper, coax tester

    Price: $12.25
    View
    Availability: Min. Qty. Order
    Primus Cable Item #: NPNB-T103C -

      BNC Adapter Kit for 4Mapper™ Coax Cable Tester The BNC Adapter Kit for 4Mapper™ Coax Cable Tester is a set of four BNC female to female F connector adapters and one BNC female to male F connector adapter. For use with the 4Mapper™ Coax Cable Tester TL4-2159

      F Remote Kit for 4Mapper™ Coax Cable Tester coax cable tester, 4mapper, coax tester

      Price: $12.25
      View
      Availability: Call For Shipping
      Primus Cable Item #: TL4-5757 -

        F Remote Kit for 4Mapper™ Coax Cable Tester The F Remote Kit for 4Mapper™ Coax Cable Tester is a set of four F connector coax testing remotes. It allows you to use the 4Mapper™ to test up to four cables at once. This unit also includes a holster to store the four coax F remotes. For use with the 4Mapper™ Coax Cable Tester TL4-2159

        Alarm Cable Tester, Alarm Tone Generator & Loop Verifier

        Price: $74.84
        View
        Availability: Min. Qty. Order
        Greenlee Item #: NPNB-PE620 -

          Loop Verifier and Tone Generator for Security Cable The Loop Verifier and Tone Generator from Greenlee is designed specifically as a security and alarm continuity tester. It can be connected to a Normally-Open or Normally-Closed loop pair and provides a distinct audible tone when the alarm condition occurs. Latching feature identifies intermittent failures (swingers) and confirms operation of switches at remote locations. In latching mode, the Loop Verifier will catch the alarm condition and...

          3.5" IP/TVI/Analog Camera Service Monitor

          Price: CALL
          View
          Availability: Coming Soon!
          Primus Cable Item #: NPNB-NTH-IP35TM -

            3.5" IP/TVI/Analog Camera Service Monitor The 3.5" IP/TVI/Analog Camera Service Monitor has a 3.5" capacitive touch screen display with 480x320 resolution. This camera service monitor is compatible with IP, HD-TVI, and 960H analog cameras. It has a touch screen OSD and is key controllable. This tester also has Wi-Fi built in for testing IP cameras.

            4Mapper™ Coax Cable Tester coax cable tester, 4mapper, coax tester

            Price: $41.95
            View
            Availability: In Stock
            Primus Cable Item #: TL4-2159 -

              4Mapper™ Coax Cable Tester The 4Mapper™ Coax Cable Tester is a quick and easy solution for troubleshooting coaxial cable in your security system. It is quick and easy to use, and tracks up to four coax connections at the same time.This coax cable tester displays pass, open, and short conditions, and has a built in tone generator. The 4Mapper™ with its easy one button design is extremely efficient. The bright, high intensity LEDs make it easy to read in daylight. The Following Accessories are...

              Professional Tone and Probe Kit, Alligator Clips

              Price: $99.95-$115.95
              View
              Availability: In Stock
              Primus Cable Item #: NPNB-TG21## -

                Professional Tone and Probe Kit The Professional Tone and Probe Kit gives technicians a high powered tone generator and tone tracing probe. The ToneMaster™ tone generator enables signal detection over 20 miles away and makes tracing through walls and enclosures easier. It has multiple tones and power levels for network, signal wire, coax, and telephone cable applications. Four tone amplitude levels include normal and half, high-powered normal and half, with the half amplitude unbalanced for...

                Network Cable Tester, LAN Tone & Probe Tracing Kit

                Price: $186.43
                View
                Availability: Min. Qty. Order
                Greenlee Item #: TL4-2787 -

                  Network Cable Tester, LAN Tone & Probe Tracing Kit To provide a single wire identification solution for the network professional, Greenlee has developed the AT8LK LAN Toner Kit by combining the AT8L LAN Toner and the 200GX Inductive Amplifier in a rugged carrying case. This kit can be used on any wiring system including Datacom, Telecom, Security/Alarm, Audio and CATV. Designed for network installation and maintenance, the new LAN Toner has the unique feature of sending tone in addition to...

                  Network Cable Tester, Multi-Filter Tone Probe

                  Price: $143.54
                  View
                  Availability: Min. Qty. Order
                  Greenlee Item #: TL4-5734 -

                    Multi-Filter Tone Probe The Greenlee 200XP Professional Tone Probe provides easy one-handed, battery-powered operation with single-button and continuous volume control. Unique design identifies and traces wires within a group without damaging insulation. Connect Tone Tracer lead to subject wire and other test lead to earth or equipment ground. Turn on Tone Probe and touch tip to insulation of each suspect conductor. Tone will be distinctly loudest on subject wire.

                    Network Cable Tester, Professional Tone Probe

                    Price: $97.19
                    View
                    Availability: Min. Qty. Order
                    Greenlee Item #: TL4-5759 -

                      Professional Tone Probe The Greenlee 200EP-G Professional Tone Probe works with a tone generator (sold separately) to locate single conductors or cables within a bundle at cross-connect point or at remote ends. This Greenlee Probe offers unique features such as a headset jack, an incorporated LED flashlight for locating wires in dark areas, and adjustable volume control.

                      Network Cable Tester, Filter Probe

                      Price: $143.54
                      View
                      Availability: Min. Qty. Order
                      Greenlee Item #: NPNB-200FP -

                        Network Cable Tester, Filter Probe The Greenlee 200FP filter probe is the only probe that stops power line hum. Filter probe blocks ac interference by filtering out power-related noise. A switch selects between filter or standard operation. The probe is audible within 15'' of a conductor carrying a 5-V peak-to-peak signal.