#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Networking Cable Pulling Tools

Proper cable pulling tools are essential for any large scale bulk Ethernet or fiber installation. Having the correct tools is essential for a safe and efficient installation. Pulling rope utilized must be dry, clean, and free of damage. It must be selected according to the appropriate specifications for pulling tension, cable gauge, and length of the run.

Heavy duty pulling applications necessitate cable pulling tools like the Composite Double Braid Pulling Rope. This high tensile strength, low stretch double braided cable pulling rope has factory spliced pulling eyes at each end. It is low stretch with a high tensile strength matched to an ideal pulling force. Low stretching tendency makes it safe for cable installers as it won’t snap back and injure anyone in the event of an accident.

The minimum break strength of this cable pulling rope varies depending on diameter size, but it ranges from 5,000 pounds per foot to as much as 42,000 pounds per foot. This pulling rope is available in diameters ranging from 3/8” to up to 1.”

Cable installation tools like fishing rods are also recommended for pulling wire and cable through insulated walls and in hard to reach areas. The 1/4" Fiberfish “FourPack” Wire Fishing Rods are cable pulling tools which can be screwed together to provide the necessary reach. These cable pulling tools are flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Ideal for a wide range of challenges, the Fiberfish comes packaged in a handy vinyl pouch with a bullnose tip and fish hook.

The 5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating is convenient for pulling fish line and rope. It is jacketed with a plastic coating for superior durability and flexibility. This cable pulling tool has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

Coming prepared with cable installation tools to your networking project will not only save you much frustration, but also save you time and money. Primus Cable carries everything you need to get the job done right the first time, every time.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-48 of 150
Show
 Restoration Kit - Fiberfish & Glowfish Rods

Price: $6.50
View
Availability: In Stock
B.E.S. Manufacturing Item #: FIB401 -

    ¼” Fiberfish Rod Repair Kit Restore your Fiberfish & Glowfish Rods with the Fiberfish Repair Kit. The kit includes Fiberglass gel-coat restorer and swabs. It is used to repair minor splintering and rough fiberglass surfaces.

    ¼” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total) Home Pro Line Kit, Plastic Coated Fiberfish 2 kit, plastic fiberfish kit, plastic fiberfish rod kit, plastic coated rod kit, plastic installation rods, felxible plastic fiberfish rods

    Price: $34.95
    View
    Availability: In Stock
    B.E.S. Manufacturing Item #: HPL100 -

      ¼” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total) The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

      3/16 in. and 1/4 in. Fibersnake Roller Guide

      Price: $16.25
      View
      Availability: In Stock
      B.E.S. Manufacturing Item #: FIBT203 -

        1/4" & 3/16" Fibersnake Roller Guide The 1/4" & 3/16” Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit. It works well with corrugated conduit as well.

        3/16 in. and 1/4 in. Fibersnake Swivel Coupling, Joiner Section

        Price: $13.95
        View
        Availability: In Stock
        B.E.S. Manufacturing Item #: FIBT202 -

          1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section The 1/4" & 3/16” Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

          Fiberfish Rod Kit, Wire Installation Rods, 12%27 long x 1/4" Diameter, Yellow

          Price: $35.40
          View
          Availability: In Stock
          B.E.S. Manufacturing Item #: FIB130 -

            Fiberfish 1/4" "FourPack", 3' Wire Fishing Rod Kit These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

            1/4" Glowfish & Fiberfish Female Replacement End

            Price: $3.35
            View
            Availability: In Stock
            B.E.S. Manufacturing Item #: FIB117 -

              1/4" Fiberfish Replacement End, Female The 1/4" Fiberfish Replacement End fits our wire fishing rods from BES like the Fiberfish. It has a female machined steel tip.

              1/4" Glowfish & Fiberfish Male Replacement End

              Price: $3.35
              View
              Availability: In Stock
              B.E.S. Manufacturing Item #: FIB116 -

                1/4" Fiberfish Replacement End, Male The 1/4" Fiberfish Replacement End fits our wire fishing rods from BES like the Fiberfish. It has a male machined steel tip.

                Fiberfish & Glowfish Replacement Tip, 1/4" Ball Chain

                Price: $10.10
                View
                Availability: In Stock
                B.E.S. Manufacturing Item #: FIB119 -

                  1/4" Fiberfish Replacement Tip, Ball Chain The 1/4" Fiberfish Replacement Ball Chain Tip fits our wire fishing rods from BES like the Fiberfish and is manufactured from machined steel.

                   1/4" Fiberfish Replacement Tip, Bullnose

                  Price: $2.40
                  View
                  Availability: In Stock
                  B.E.S. Manufacturing Item #: FIB101 -

                    1/4" Fiberfish Replacement Tip, Bullnose The 1/4" Fiberfish Replacement Tip fits our wire fishing rods from BES like the Fiberfish. It has a bullnose style machined steel tip.

                     1/4" Fiberfish Replacement Tip, Fish Hook

                    Price: $11.75
                    View
                    Availability: In Stock
                    B.E.S. Manufacturing Item #: FIB105 -

                      1/4" Fiberfish Replacement Tip, Fish Hook The 1/4" Fiberfish Replacement Tip fits our wire fishing rods from BES like the Fiberfish. It has a fish hook style machined steel tip.

                      1/4" Fiberfish Replacement Tip, LED Light Tip

                      Price: $10.95
                      View
                      Availability: In Stock
                      B.E.S. Manufacturing Item #: FIB155 -

                        1/4" Fiberfish Replacement Tip, LED Light The 1/4" Fiberfish Replacement LED Light Tip fits our wire fishing rods from BES like the Fiberfish. It has an LED light tip.

                        1/4" Fiberfish Replacement Tip, Pull Ring

                        Price: $3.20
                        View
                        Availability: In Stock
                        B.E.S. Manufacturing Item #: FIB118 -

                          1/4" Fiberfish Replacement Tip, Pull Ring The 1/4" Fiberfish Replacement Pull RIng Tip fits our wire fishing rods from BES like the Fiberfish. It has a machined steel tip manufactured of durable materials.

                          1/4" Fiberfish Replacement Tip, Screw Tip

                          Price: $9.99
                          View
                          Availability: In Stock
                          B.E.S. Manufacturing Item #: FIB125 -

                            1/4" Fiberfish Replacement Screw Tip The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

                            1/4" Fiberfish Replacement Tip, Wisp Head

                            Price: $8.20
                            View
                            Availability: In Stock
                            B.E.S. Manufacturing Item #: FIB122 -

                              1/4" Fiberfish Replacement Tip, Wisp Head The 1/4" Fiberfish Replacement Wisp Head Tip fits our wire fishing rods from BES like the Fiberfish. It has a wisp style machined steel tip.

                              1/4" Fiberfish Replacement Wire Fishing Rod, 3’ Male/Female Fiberfish Kit, Plastic Coated Fiberfish kit, plastic fiberfish kit, plastic fiberfish rod kit, plastic coated rod kit, plastic installation rods, felxible plastic fiberfish rods

                              Price: $13.80
                              View
                              Availability: In Stock
                              B.E.S. Manufacturing Item #: FIB114 -

                                Fiberfish 1/4" Wire Fishing Rod, Replacement - 3' Male/Female Ends These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                Fiberfish Rod, 6%27 long x 1/4" Diameter Replacement Rod, Bullnose / Female, Yellow

                                Price: $20.80
                                View
                                Availability: In Stock
                                B.E.S. Manufacturing Item #: FIB103 -

                                  Fiberfish 1/4" Wire Fishing Rod, Replacement - 6' Bullnose Female Ends These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                  Fiberfish Rod, 6%27 long x 1/4" Diameter Replacement Rod, Male / Female, Yellow

                                  Price: $20.80
                                  View
                                  Availability: In Stock
                                  B.E.S. Manufacturing Item #: FIB113 -

                                    Fiberfish 1/4" Wire Fishing Rod, Replacement - 6' Male/Female Ends These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                    1/4" Fiberfish & Glowfish Rods Attachment Kit 2

                                    Price: $19.95
                                    View
                                    Availability: In Stock
                                    B.E.S. Manufacturing Item #: FIB165 -

                                      1/4" Fiberfish Rod Attachment Kit The 1/4" Fiberfish Rod Attachment Kit includes replacement tips for 1/4" FIberfish rods. Set includes LED Tip, Wisp Head, Fish Hook, Replacement Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring attachment tips.

                                      1/4" Fiberfish & Glowfish Rods Starter Attachment Kit

                                      Price: $11.95
                                      View
                                      Availability: In Stock
                                      B.E.S. Manufacturing Item #: FIB160 -

                                        1/4" Fiberfish Rod Attachment Starter Kit The 1/4" Fiberfish Rod Attachment Starter Kit includes replacement tips for 1/4" FIberfish rods. Set includes Wisp Head, Fish, Hook, and Bullnose attachment tips.

                                        Fiberfish Kit - 48%27 long x 1/4"Diameter - Yellow

                                        Price: $155.95
                                        View
                                        Availability: In Stock
                                        B.E.S. Manufacturing Item #: FIB148 -

                                          Fiberfish 1/4 Inch Diameter, 48 Foot (8 - 6 Foot rods) Yellow Rod Kit The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

                                          Fiberfish Rod, 1/4" Replacement Rods, 1-3%27 Male/Female, 1-3%27 Female/Female & 2 Bullnose Tips, Yellow

                                          Price: $24.80
                                          View
                                          Availability: In Stock
                                          B.E.S. Manufacturing Item #: FIB104 -

                                            1/4" Fiberfish Wire Fishing Rod Kit, 3’ Male/Female, Female/Female Rods, Bullnose Tips These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                            Fiberfish Rod Kit, Wire Installation Rods, 18%27 long x 1/4" Diameter, Yellow

                                            Price: $74.99
                                            View
                                            Availability: In Stock
                                            B.E.S. Manufacturing Item #: FIB108 -

                                              1/4" Fiberfish Wire Fishing Rod Kit, 3' Rods, 18' Total These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. All rods feature durable zinc-plated, rustproof, and machined steel end fittings. The kits come packaged in a handy clear carry case with vinyl caps.

                                              Fiberfish Kit - 24%27 long x 1/4"Diameter - Yellow

                                              Price: $84.95
                                              View
                                              Availability: In Stock
                                              B.E.S. Manufacturing Item #: FIB107 -

                                                1/4" Fiberfish Wire Fishing Rod Kit, 6’ Rods - 24' Total These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

                                                1/4" Fiberfish Wire Fishing Rod, 3’ Bullnose Female Fiberfish Kit, Plastic Coated Fiberfish kit, plastic fiberfish kit, plastic fiberfish rod kit, plastic coated rod kit, plastic installation rods, felxible plastic fiberfish rods

                                                Price: $13.80
                                                View
                                                Availability: In Stock
                                                B.E.S. Manufacturing Item #: FIB110 -

                                                  Fiberfish 1/4" Wire Fishing Rod - 3' Bullnose Female Ends These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                                  1/4" Fibersnake Rodder

                                                  Price: $175.95-$894.95
                                                  View
                                                  Availability: In Stock
                                                  B.E.S. Manufacturing Item #: RR### -

                                                    1/4" Fibersnake Replacement Rodder for Fish Line and Rope Pulling The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

                                                    1/4" Fibersnake Rodder

                                                    Price: $518.95-$1,101.95
                                                    View
                                                    Availability: Out of Stock
                                                    B.E.S. Manufacturing Item #: FIBR### -

                                                      1/4" Fibersnake Rod for Fish Line and Rope Pulling The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

                                                      10FT or 25FT Fish Wire (In PVC Case), Carbon Steel

                                                      Price: $28.95-$38.95
                                                      View
                                                      Availability: In Stock
                                                      B.E.S. Manufacturing Item #: FW## -

                                                        10' Fish Wire, Carbon Steel for Wire Pulling The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

                                                        Undercarpet Snake (In PVC Case), Flat-Steel

                                                        Price: $37.95-$59.95
                                                        View
                                                        Availability: In Stock
                                                        B.E.S. Manufacturing Item #: UC## -

                                                          10’ or 25’ Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

                                                          10 Foot Fish Ball Chain

                                                          Price: $8.85
                                                          View
                                                          Availability: In Stock
                                                          B.E.S. Manufacturing Item #: BC-120 -

                                                            10 Foot Fish Ball Chain Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

                                                            Flex-Fish 24 Inch Flexible Wire Fishing Tool

                                                            Price: $11.95
                                                            View
                                                            Availability: In Stock
                                                            B.E.S. Manufacturing Item #: FIB221 -

                                                              24" Flex-Fish Flexible Wire Fishing Tool Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

                                                              Fish 10%27 Ball Chain and Flex-Fish 24" Flexible Wire Fishing Tool

                                                              Price: $18.95
                                                              View
                                                              Availability: In Stock
                                                              B.E.S. Manufacturing Item #: FIB223 -

                                                                Flex-Fish 24" Flexible Wire Fishing Tool and 10' Ball Chain Use the 10 foot chain and magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a threaded female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments. This versatile wire fishing tool bends in any direction and holds its shape.

                                                                3/16" & 1/4” Fibersnake Replacement Brass Tip, Bullnose

                                                                Price: $10.35
                                                                View
                                                                Availability: In Stock
                                                                B.E.S. Manufacturing Item #: FIBT101 -

                                                                  3/16" & 1/4” Fibersnake Replacement Brass Tip, Bullnose The 3/16" & 1/4” Fibersnake Replacement Brass Tip, Bullnose fits our Fibersnake Rodders from BES.

                                                                  3/16", 5/32" Fiberfish Replacement Tip, Pull Ring

                                                                  Price: $3.05
                                                                  View
                                                                  Availability: In Stock
                                                                  B.E.S. Manufacturing Item #: FIB518 -

                                                                    3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull RIng This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

                                                                    3/16" & 5/32" Fiberfish II, Glowfish, & Glowfish II Replacement Tip, Ball Chain

                                                                    Price: $10.05
                                                                    View
                                                                    Availability: In Stock
                                                                    B.E.S. Manufacturing Item #: FIB519 -

                                                                      3/16" Fiberfish Replacement Tip, Ball Chain The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It has a ball chain style machined steel tip.

                                                                      3/16" & 5/32" Fish Hook Replacement Tip for Fiberfish/Glowfish

                                                                      Price: $11.75
                                                                      View
                                                                      Availability: In Stock
                                                                      B.E.S. Manufacturing Item #: FIB505 -

                                                                        3/16" Fiberfish Replacement Tip, Fish Hook The 3/16" Fiberfish Replacement Tip fits our wire fishing rods from BES like the Fiberfish. It has a fish hook style machined steel tip.

                                                                        3/16" and 5/32" Fiberfish Replacement Tip, Screw Tip

                                                                        Price: $9.95
                                                                        View
                                                                        Availability: In Stock
                                                                        B.E.S. Manufacturing Item #: FIB525 -

                                                                          3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Screw The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. This screw tip screws into the end of small communications cables for faster, easier pulls. It saves time as there is no need to tape up the cable.

                                                                          3/16" and 5/32" Fiberfish/Glowfish Replacement Tip, Wisp Head

                                                                          Price: $7.95
                                                                          View
                                                                          Availability: In Stock
                                                                          B.E.S. Manufacturing Item #: FIB522 -

                                                                            3/16" & 5/32" Fiberfish/Glow Fish Replacement Tip, Wisp Head This Wisp Head Replacement Tip fits BES wire fishing rods like the Fiberfish and Glowfish. It is manufactured of durable, heavy duty glow in the dark plastic.

                                                                            3/16" & 5/32" Fiberfish II, Glowfish, & Glowfish II Rods Starter Attachment Kit

                                                                            Price: $11.95
                                                                            View
                                                                            Availability: In Stock
                                                                            B.E.S. Manufacturing Item #: FIB560 -

                                                                              3/16" & 5/32” Fiberfish/Glowfish Rods Starter Attachment Kit The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

                                                                              3/16" & 5/32" Fiberfish II, Glowfish, & Glowfish II Rods Attachment Kit 2

                                                                              Price: $19.95
                                                                              View
                                                                              Availability: In Stock
                                                                              B.E.S. Manufacturing Item #: FIB565 -

                                                                                3/16" & 5/32” Fiberfish/Glowfish Rods Starter Attachment Kit 2 The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

                                                                                Fiberfish II Rod Kit, Wire Installation Rods, 3%27 length x  3/16" Diameter Orange

                                                                                Price: $35.50
                                                                                View
                                                                                Availability: In Stock
                                                                                B.E.S. Manufacturing Item #: FIB230 -

                                                                                  Fiberfish 1/4" "FourPack", 3' Wire Fishing Rod Kit These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

                                                                                  3/16" Fiberfish II & Glowfish Rods Repair Kit

                                                                                  Price: $6.50
                                                                                  View
                                                                                  Availability: In Stock
                                                                                  B.E.S. Manufacturing Item #: FIB402 -

                                                                                    3/16” Fiberfish II Rod Repair Kit Restore your Fiberfish II & Glowfish Rods with the Fiberfish II Repair Kit. The kit includes Fiberglass gel-coat restorer and swabs. It is used to repair minor splintering and rough fiberglass surfaces.

                                                                                    1/4" Glowfish & Fiberfish Male Replacement End

                                                                                    Price: $3.35
                                                                                    View
                                                                                    Availability: In Stock
                                                                                    B.E.S. Manufacturing Item #: FIB217 -

                                                                                      3/16" Fiberfish II Female Replacement Rod End This includes a replacement female end for the Fiberfish II 3/16" rods.

                                                                                      Fiberfish II Rod Kit, Wire Installation Rods, Plastic Coated 3%27 length x  3/16" Diameter Orange

                                                                                      Price: $78.95
                                                                                      View
                                                                                      Availability: In Stock
                                                                                      B.E.S. Manufacturing Item #: PCF208 -

                                                                                        3/16" Fiberfish II Kit, Plastic Coated Rods – 3’ (24’ Total Length) The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

                                                                                        Fiberfish II Rod Kit, Wire Installation Rods, Plastic Coated 6%27 length x  3/16" Diameter Orange

                                                                                        Price: $76.39
                                                                                        View
                                                                                        Availability: In Stock
                                                                                        B.E.S. Manufacturing Item #: PCF207 -

                                                                                          3/16" Fiberfish II Kit, Plastic Coated Rods – 6’ (30’ Total Length) The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

                                                                                          1/4" Glowfish & Fiberfish Male Replacement End

                                                                                          Price: $3.35
                                                                                          View
                                                                                          Availability: In Stock
                                                                                          B.E.S. Manufacturing Item #: FIB216 -

                                                                                            3/16" Fiberfish II Male Replacement Rod Tip The 3/16" Male Replacement End includes a spare tip compatible with the Fiberfish II wire fishing rods.

                                                                                            3/16" Fiberfish II Replacement Tip, Silver Bullnose

                                                                                            Price: $3.20
                                                                                            View
                                                                                            Availability: In Stock
                                                                                            B.E.S. Manufacturing Item #: FIB201 -

                                                                                              3/16" Fiberfish/Glowfish Replacement Tips, Bullnose The 3/16" Fiberfish/Glowfish Replacement Tips, Bullnose includes one replacement Bullnose style tips for the 3/16" Fiberfish and Glowfish.

                                                                                              3/16" Fiberfish II Replacement Wire Fishing Rod, 3’ Bullnose/Female Fiberfish II Kit, Plastic Coated Fiberfish 2 kit, plastic fiberfish kit, plastic fiberfish rod kit, plastic coated rod kit, plastic installation rods, felxible plastic fiberfish rods

                                                                                              Price: $10.70
                                                                                              View
                                                                                              Availability: In Stock
                                                                                              B.E.S. Manufacturing Item #: FIB214 -

                                                                                                Fiberfish II 3/16", Replacement Wire Fishing Rod - 3' Bullnose/Female These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

                                                                                                3/16" Fiberfish II Replacement Wire Fishing Rod, 3’ Male/Female Fiberfish II Kit, Plastic Coated Fiberfish 2 kit, plastic fiberfish kit, plastic fiberfish rod kit, plastic coated rod kit, plastic installation rods, felxible plastic fiberfish rods

                                                                                                Price: $10.70
                                                                                                View
                                                                                                Availability: In Stock
                                                                                                B.E.S. Manufacturing Item #: FIB215 -

                                                                                                  Fiberfish II 3/16" Replacement Wire Fishing Rod - 3' Male/Female These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.