#1 Source For Low Voltage Wire & Cable

(951) 824-1571

EMT Connectors and Fittings for Conduit

EMT or electrical metal tubing connectors are used to attach EMT conduit to wiring boxes and enclosures. ##STORENAME supplies an extensive selection of EMT connectors including EMT compression connectors, 90 degree angle connectors, pull elbows, set screw connectors, and offset connectors.

The EMT Connectors, Compression Type, Steel, 1/2" - 4" from Primus Cable is used to compress and seal a piece of conduit to a junction box. This type of EMT connector is easy to install with compression fitting technology. This steel EMT connector is available in sizes ranging from ½” to up to 4” in diameter.

Primus Cable also supplies pull elbows like the EMT 90 Degree Pull Elbow. This type of EMT connector transitions a conduit system from EMT to rigid, and is available in sizes ranging from ½” to 1 ¼” in diameter. This zinc die cast EMT connector has a removable cover to facilitate wire pulling.

We also supply fittings and couplers for EMT conduit, like the Combination Couplings EMT (1/2”-3/4”) to Flex (3/8”-3/4”). These couplings for EMT conduit are made of die cast zinc for solid durability. It is available in 3/8”, ½”, and ¾” flex versions.

Thank you for visiting Primus Cable, we are your end-to-end provider of networking equipment and conduit accessories. We supply everything you need to get the job done under budget and on time, every time.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-31 of 31
Show
EMT / Rigid Clamp Backs, Malleable Iron, 1/2" - 6" EMT, Rigid, Clamp Backs, Malleable Iron,

Price: CALL
View
Availability: Call for Pricing
Primus Cable Item #: NPNB-T481 -

    EMT / Rigid Clamp Backs, Malleable Iron, 1/2" - 6"EMT / Rigid Clamp Backs are used to provide spacing from mounting surfaces. Clamp Backs are available in multiple sizes and package quantities.

    EMT 90 Degree Angle Connectors, Compression Type, Zinc Die Cast, 1/2" - 1"    EMT, 90 Degree Angle, Connectors, Compression Type, Zinc Die Cast,

    Price: CALL
    View
    Availability: Call for Pricing
    Primus Cable Item #: NPNB-T431 -

      EMT 90 Degree Angle Connectors, Compression, Zinc Die Cast, 1/2" - 1"EMT 90 Degree Angle Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes and package quantities.

      EMT 90 Degree Angle Connectors, Set Screw Type, Zinc Die Cast, 1/2" - 3/4"   EMT 90 Degree Angle Connectors, Set Screw Type, Zinc Die Cast, 1/2" - 3/4"

      Price: CALL
      View
      Availability: Call for Pricing
      Primus Cable Item #: CD6-183#-EMT -

        EMT 90 Degree Angle Connectors, Set Screw, Zinc Die Cast EMT 90 Degree Angle Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes and package quantities.

        EMT 90 Degree Pull Elbow, EMT to EMT, Set Screw Type, Zinc Die Cast, 1/2" - 1 1/4"   EMT 90 Degree Pull Elbow, Set Screw Type, Zinc Die Cast, EMT to EMT,

        Price: CALL
        View
        Availability: Call for Pricing
        Primus Cable Item #: NPNB-T381 -

          EMT 90 Degree Pull Elbow, Set Screw Type, Zinc Die Cast, EMT to EMT, 1/2" - 1 1/4"EMT 90 Degree Pull Elbows provide 90 degree angle for EMT. They also have a removable cover to facilitate wire pulling. Pull Elbows are available in multiple sizes and package quantities.

          EMT 90 Degree Pull Elbow, Set Screw Type, EMT to Box, Zinc Die Cast, 1/2" - 3/4"   EMT 90 Degree Pull Elbow, Set Screw Type, EMT to Box, Zinc Die Cast, 1/2" - 3/4"

          Price: CALL
          View
          Availability: Call for Pricing
          Primus Cable Item #: NPNB-T371 -

            EMT 90 Degree Pull Elbow, Set Screw, Zinc Die Cast, EMT to Box, 1/2" - 3/4"EMT 90 Degree Pull Elbows are used to connect EMT conduit into boxes or enclosures and have a removable cover to facilitate wire pulling. Pull Elbows are available in multiple sizes and package quantities.

            EMT 90-Degree Pull Elbow, EMT to Rigid, Set Screw and Threaded,  Zinc Die Cast, 1/2" - 1 1/4" EMT, 90-Degree Pull Elbow, Set Screw, Threaded,  Zinc Die Cast, EMT to Rigid,

            Price: CALL
            View
            Availability: Call for Pricing
            Primus Cable Item #: NPNB-T351SS -

              EMT 90 Degree Pull Elbow, Set Screw And Threaded, Zinc Die Cast, EMT to Rigid, 1/2" - 1 1/4"EMT 90 Degree Pull Elbows transition from EMT to Rigid. They also have a removable cover to facilitate wire pulling. Pull Elbows are available in multiple sizes and package quantities.

              EMT 90-Degree Pull Elbow, Rigid and EMT Combo, Set Screw and Threaded, Zinc Die Cast, 1/2" - 1 1/4"  Rigid Conduit, Conduit, EMT, 90-Degree Pull Elbow, Set Screw, Threaded,  Zinc Die Cast, EMT to Rigid,

              Price: CALL
              View
              Availability: Call for Pricing
              Primus Cable Item #: NPNB-T361SS -

                EMT 90 Degree Pull Elbow, Set Screw And Threaded, Zinc Die Cast, 1/2" - 1 1/4"EMT 90 Degree Pull Elbows come with one side threaded and a set screw on the other side. They also have a removable cover to facilitate wire pulling. Pull Elbows are available in multiple sizes and package quantities.

                EMT Connectors, Compression Type, Insulated Throat, Zinc Die Cast, Concrete Tight, 1/2" - 4"  EMT Connectors, Compression Type, Insulated Throat, Concrete Tight,

                Price: CALL
                View
                Availability: Call for Pricing
                Primus Cable Item #: NPNB-T651i -

                  EMT Connectors, Compression Type, Insulated Throat, Concrete Tight, 1/2" - 4" EMT Connectors are used to connect EMT conduit into boxes or enclosures and have an insulated throat . Connectors are available in multiple sizes ranging from 1/2" to 4" .

                  EMT Connectors, Compression Type, Steel, Concrete Tight, 1/2" - 4"  EMT Connectors, Compression Type, Steel, Concrete Tight,

                  Price: CALL
                  View
                  Availability: Call for Pricing
                  Primus Cable Item #: NPNB-T651S -

                    EMT Connectors, Compression Type, Steel, Concrete Tight, 1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                    EMT Connectors, Compression Type, Steel, Insulated Throat, Concrete Tight, 1/2" - 4"   EMT Connectors, Compression Type, Steel, Insulated Throat, Concrete Tight,

                    Price: CALL
                    View
                    Availability: Call for Pricing
                    Primus Cable Item #: NPNB-T651Si -

                      EMT Connectors, Compression Type, Steel, Insulated Throat, Concrete Tight, 1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                      EMT Connectors, Compression Type, Steel, Rain Tight, 1/2" - 4"   EMT Connectors, Compression Type, Steel, Rain Tight, 1/2" - 4", Electrical Conduit, EMT Conduit, Compression Connector,

                      Price: $1.15-$217.68
                      View
                      Availability: In Stock
                      Primus Cable Item #: CD6-59##-EMT -

                        EMT Compression Connectors EMT Compression Connectors are used to connect EMT conduit into junction boxes or enclosures. Connectors are rain and concrete tight and available in ½” – 4”. Primus Cable’s steel EMT compression connectors have been designed to comply with the new rain tight test requirements. The Connectors heavy gauge steel construction maintains mechanical protection and solid grounding of one conduit to another. Compression Connectors are zinc electroplated for excellent...

                        EMT Connectors, Compression Type, Steel, Rain Tight, Insulated Throat, 1/2" - 4"    EMT Connectors, Compression Type, Steel, Rain Tight, Insulated Throat,

                        Price: CALL
                        View
                        Availability: Call for Pricing
                        Primus Cable Item #: NPNB-T651SiRT -

                          EMT Connectors, Compression Type, Steel, Rain Tight, Insulated Throat,1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                          EMT Connectors, Set Screw Type, Insulated Throat, Zinc Die Cast, Concrete Tight When Taped, 1/2" - 4"   EMT Connectors, Set Screw, Insulated Throat, Concrete Tight When Taped,

                          Price: CALL
                          View
                          Availability: Call for Pricing
                          Primus Cable Item #: NPNB-T631i -

                            EMT Connectors, Set Screw, Insulated Throat, Concrete Tight When Taped, 1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                            EMT Connectors, Set Screw Type, Steel, Concrete Tight When Taped, 1/2" - 4"  EMT Connectors, Set Screw Type, Steel, Concrete Tight When Taped,

                            Price: CALL
                            View
                            Availability: Call for Pricing
                            Primus Cable Item #: NPNB-T631S -

                              EMT Connectors, Set Screw, Steel, Concrete Tight When Taped, 1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                              EMT Connectors, Set Screw Type, Steel, Insulated Throat, Concrete Tight When Taped, 1/2" - 4"   EMT Connectors, Set Screw Type, Steel, Insulated Throat, Concrete Tight When Taped,

                              Price: CALL
                              View
                              Availability: Call for Pricing
                              Primus Cable Item #: NPNB-T631Si -

                                EMT Connectors, Set Screw, Steel, Concrete Tight When Taped, 1/2" - 4"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                                EMT Connectors, Set Screw Type, Zink Die Cast, Concrete Tight When Taped, 1/2" - 4"   EMT Connectors, Set Screw Type, Zinc Die Cast, Concrete Tight When Taped,

                                Price: CALL
                                View
                                Availability: Call for Pricing
                                Primus Cable Item #: NPNB-T631 -

                                  EMT Connectors, Set Screw Type, Zink Die Cast, Concrete Tight When Taped, 1/2" - 4" EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 4" .

                                  EMT Insulating Bushing, Nylon, 1/2"- 4"   EMT Insulating Bushing, Nylon, PVC Electrical Conduit, EMT Conduit,

                                  Price: CALL
                                  View
                                  Availability: Call for Pricing
                                  Primus Cable Item #: NPNB-T1661 -

                                    EMT Insulating Bushing, Nylon, 1/2" - 4" EMT Insulating Bushings are used to protect low voltage cables from damage caused by sharp edges on the end of EMT conduits. They may be used with many low voltage cables including, coaxial, computer, telephone, category 5E, category 6, audio, video, fire alarm system, security system, and thermostat cables. These nylon insulating bushings have a tight press fit that firmly holds it while the installer snaps it in place on the end of conduits; they will...

                                    EMT Offset Connectors, Compression Type , Zinc Die Cast, EMT to box, 1/2" - 1"  EMT Offset Connectors, Compression Type, Zinc Die Cast, EMT to box,

                                    Price: CALL
                                    View
                                    Availability: Call for Pricing
                                    Primus Cable Item #: NPNB-T781 -

                                      EMT Offset Connectors, Compression Type, Concrete Tight , 1/2" - 1" EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 1" .

                                      EMT Offset Connectors, Set Screw Type, Zinc Die Cast, EMT to box, 1/2" - 1"   EMT Offset Connectors, Set Screw Type, Zinc Die Cast, EMT to box,

                                      Price: CALL
                                      View
                                      Availability: Call for Pricing
                                      Primus Cable Item #: NPNB-T771 -

                                        EMT Offset Connectors, Set Screw, Concrete Tight When Taped, 1/2" - 1"EMT Connectors are used to connect EMT conduit into boxes or enclosures. Connectors are available in multiple sizes ranging from 1/2" to 1" .

                                        EMT to EMT, Inside Corner, Set Screw Type, Zinc Die Cast, 1/2" - 3/4"    EMT to EMT, Inside Corner, Set Screw Type, Zinc Die Cast, 1/2" - 3/4"

                                        Price: CALL
                                        View
                                        Availability: Call for Pricing
                                        Primus Cable Item #: NPNB-T341 -

                                          EMT to EMT, Inside Corner, Set Screw Type, Zinc Die Cast, 1/2" - 3/4" EMT to EMT Inside Corners provide 90 Degrees of bend and are Set Screw Type. Inside Corners are available in multiple sizes and package quantities.

                                          Box-to-Box Locknut and Snap-Tite® Connectors

                                          Retail: $1.72
                                          Price: $1.54
                                          View
                                          Availability: Call For Shipping
                                          Arlington Item #: 260 -

                                            Box-to-Box Locknut and Snap-Tite® Connectors This Box-to-Box Locknut and Snap-Tite® Connectors allows you to connect two or more boxes to gether while allowing access though out the boxes.

                                            3-Piece Zinc die-cast Coupling Rigid IMC

                                            Price: $3.18-$402.61
                                            View
                                            Availability: In Stock
                                            Arlington Item #: 200 -

                                              The Arlington 3-Piece Zinc die-cast Couplings are ideal for coupling together two conduits that cant be turned or moved. The 3 part system makes it easy to apply the teo couplers to each end of the conduits and one to connect them together.

                                              EMT Compression Connectors UL/CSA Listed Concrete Tight, Zinc Die-Cast – 1/2” - 2”

                                              Price: $0.63-$25.08
                                              View
                                              Availability: Call For Shipping
                                              Arlington Item #: 820 -

                                                EMT Compression Connectors UL/CSA Listed Concrete Tight EMT Compression Connectors are for use to bond EMT conduit to a box or enclosure. Our connectors provide concrete-tight connections and are suitable for applications above 600V. All steel construction insures mechanical protection for the raceway. All components are zinc electroplated for corrosion protection and available in multiple sizes.

                                                EMT Set-Screw Connectors Concrete tight, Zinc die-cast - 1-1/4" to 2""

                                                Price: $2.09-$3.80
                                                View
                                                Availability: Call For Shipping
                                                Arlington Item #: 803 -

                                                  EMT Set-Screw Connectors Concrete tight, Zinc die-cast EMT Set Screw Electrical Connectors are used in dry locations to bond 1/2” EMT thinwall conduits to electrical junction boxes or enclosures. Primus Cable's steel set screw connectors provide concrete tight connections when taped and properly secured with the included locknut, and are rated for electrical applications above 600 volts. Their heavy gauge steel construction maintains mechanical protection and solid grounding of the conduit to...

                                                  EMT Set-Screw Connectors Concrete tight, Zinc die-cast - 1/2" to 1"

                                                  Price: $0.38-$1.19
                                                  View
                                                  Availability: Call For Shipping
                                                  Arlington Item #: 800 -

                                                    EMT Single Set-Screw Connectors Concrete tight, Zinc die-cast EMT Set Screw Electrical Connectors are used in dry locations to bond 1/2” EMT thinwall conduits to electrical junction boxes or enclosures. Primus Cable's steel set screw connectors provide concrete tight connections when taped and properly secured with the included locknut, and are rated for electrical applications above 600 volts. Their heavy gauge steel construction maintains mechanical protection and solid grounding of the...

                                                    Single Screw Duplex Connector, Zinc die-cast

                                                    Price: $1.31
                                                    View
                                                    Availability: In Stock
                                                    Arlington Item #: 846 -

                                                      Single Screw Duplex Connector, Zinc die-cast for Flexible Conduit The 3/8 inch Single Screw Duplex Connectors are designed to connect and bond 2 pieces of flexible metal conduit, AC, MC, MCI or NM cable to a steel outlet box or other metal enclosure when only 1 knockout is in use. These connectors include Tri-drive headed and a zinc-plated steel screw to prevent to connector from disconnecting. This Duplex Connector meets UL and requirements and is made in America.

                                                      Twin Screw Gland-Type Service Entrance Cable Connectors, Zinc die-cast, 1"

                                                      Price: $8.11
                                                      View
                                                      Availability: Min. Qty. Order
                                                      Arlington Item #: WC1001 -

                                                        Twin Screw Gland-Type Service Entrance Cable Connectors Twin Screw Gland-Type Service Entrance Cable Connectors are made of zinc die-cast steel and provide a liquid tight connection to meters and enclosures. The rugged metallic construction will last the life of the installation. Multiple sizes are available.

                                                        UF Cable Connectors, Compression type for underground feeder cable. Zinc die-cast.

                                                        Price: $3.85-$4.08
                                                        View
                                                        Availability: Min. Qty. Order
                                                        Arlington Item #: UF## -

                                                          UF Cable Connectors, Compression type UF Cable Compression Connectors are UL listed and concrete tight. These are used for underground connections between feeder cables. These reliable fittings are concrete-tight and maintain the same protection for your cables as the conduit they are running through. They are also CSA listed and made of Zinc die-cast. Available in multiple sizes.

                                                          /Shared/images/29_Electrical Products/NPNB-85_02.jpg

                                                          Retail: $1.05
                                                          Price: $0.94
                                                          View
                                                          Availability: Call For Shipping
                                                          Arlington Item #: 85 -

                                                            Zinc die-cast 90° Connector These 90° Connectors are for aluminum, steel, or Flex AC/MC cable.