Skip to content
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.

300Mbps Wireless N Access Point, PoE

by TP-Link
$24.99
SKU: TL-WA801ND
Various lead times may apply to this product. Please contact us for more details.
PoE Capable

Description

300Mbps Wireless N Access Point, PoE

What This Product Does

The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

Wireless Application Network Map

Wireless N - Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes - Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported - More Flexible Deployment

The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office. *All above information apply to TL-WA801ND version 2.0 ONLY.

*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.

Features

Features

  • 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming*
  • Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP
  • Easily setup a WPA encrypted secure connection at a push of the WPS button
  • Flexible deployment with included Passive Power over Ethernet Injector

Specifications

Specifications




HARDWARE FEATURES
Interface One 10/100M Ethernet Port (RJ45)
Button

Power On/Off Button

WPS Button

Reset Button

External Power Supply 9VDC / 0.6A
Wireless Standards IEEE 802.11n/g/b
Dimensions ( W x D x H) 7.1 ×4.9× 1.4 in. (181 ×125 ×36mm)
Antenna Type 2*5dBi Detachable Omni Directional (RP-SMA)
WIRELESS FEATURES
Frequency 2.4-2.4835GHz
Signal Rate 11n: Up to 300Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
Reception Sensitivity

270M: -68dBm@10% PER

130M: -68dBm@10% PER

108M: -68dBm@10% PER

54M: -68dBm@10% PER

11M: -85dBm@8% PER

6M: -88dBm@10% PER

1M: -90dBm@8% PER

Transmit Power <20dBm(EIRP)
Wireless Modes

AP Mode

Multi-SSID Mode

Client Mode

Repeater Mode (WDS/Universal)

Bridge with AP Mode

Wireless Functions

Enable/Disable Wireless Radio

WDS Bridge

MAC Address Filter

Wireless Security 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
Quality of Service WMM
Management SNMP
Advanced Functions Up to 30 meters Passive PoE is supported
GENERAL
Certification FCC, RoHS
Package Contents

Wireless Access Point TL-WA801ND

2 Detachable Om

ni directional antenna

Power supply unit

Passive PoE Power Injector

Resource CD

Quick Installation Guide

RJ-45 Ethernet Cable

System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 10,
MAC OS, NetWare, UNIX or Linux.
Environment

Operating Temperature: 0℃~40℃ (32℉~104℉)

Storage Temperature: -40℃~70℃ (-40℉~158℉)

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~90% non-condensing

What's In The Box

What's In The Box

  • (1) - Wireless Access Point
  • (1) - Power supply unit
  • (1) - Passive PoE Power Injector
  • (1) - Resource CD
  • (1) - Quick Installation Guide
  • (1) - RJ45 Ethernet Cable
  • (2) - Detachable Omni directional antennas