Description
300Mbps Wireless N Access Point, PoE
What This Product Does
The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Wireless N - Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes - Easy to Build WLAN
Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported - More Flexible Deployment
The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office. *All above information apply to TL-WA801ND version 2.0 ONLY.
*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
Features
Features
- 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming*
- Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP
- Easily setup a WPA encrypted secure connection at a push of the WPS button
- Flexible deployment with included Passive Power over Ethernet Injector
Specifications
Specifications
HARDWARE FEATURES |
||
---|---|---|
Interface | One 10/100M Ethernet Port (RJ45) | |
Button |
Power On/Off Button WPS Button Reset Button |
|
External Power Supply | 9VDC / 0.6A |
|
Wireless Standards | IEEE 802.11n/g/b | |
Dimensions ( W x D x H) |
7.1 ×4.9× 1.4 in. (181 ×125 ×36mm) |
|
Antenna Type | 2*5dBi Detachable Omni Directional (RP-SMA) |
WIRELESS FEATURES |
||
---|---|---|
Frequency | 2.4-2.4835GHz | |
Signal Rate |
11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) |
|
Reception Sensitivity |
270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER |
|
Transmit Power | <20dBm(EIRP) | |
Wireless Modes |
AP Mode Multi-SSID Mode Client Mode Repeater Mode (WDS/Universal) Bridge with AP Mode |
|
Wireless Functions |
Enable/Disable Wireless Radio WDS Bridge MAC Address Filter |
|
Wireless Security | 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK | |
Quality of Service | WMM | |
Management | SNMP | |
Advanced Functions | Up to 30 meters Passive PoE is supported |
GENERAL | ||
---|---|---|
Certification | FCC, RoHS |
|
Package Contents |
Wireless Access Point TL-WA801ND 2 Detachable Om ni directional antenna Power supply unit Passive PoE Power Injector Resource CD Quick Installation Guide RJ-45 Ethernet Cable |
|
System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 10, MAC OS, NetWare, UNIX or Linux. |
|
Environment |
Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
What's In The Box
What's In The Box
- (1) - Wireless Access Point
- (1) - Power supply unit
- (1) - Passive PoE Power Injector
- (1) - Resource CD
- (1) - Quick Installation Guide
- (1) - RJ45 Ethernet Cable
- (2) - Detachable Omni directional antennas