These products are all Made to Order
Which means they are non-cancelable and non-refundable
Description
Cable Prowler PRO Test Kit - Ethernet and Coax Cable Tester
The Cable Prowler PRO Test Kit is a high end Ethernet cable tester with a multitude of functions. This Ethernet cable tester verifies cable length, identifies link status, link capability, and PoE detection. It includes a full color display with internal memory to save and print cable testing results.
TDR technology allows you to measure cable length, and length to faults. The Ethernet cable tester also ensures adequate power for powered devices such as VoIP phones. Conduct single ended and remote cable tests with display of PASS, wire map, ID, and faults. It also tests up to eight network and telephone drops with testing and identifier remotes.
You Might Also Be Interested In:
Features
- Displays length measurement for each pair in feet or meters using TDR technology
- Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
- Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
- Link light to identify location on a hub/switch/router port
- Tests ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, misfires, split pairs, and reverses
- Generates selectable tones on selected pins for use with tone tracers
- Supports up to 8 testing & ID remotes for network & telephone cables
- Supports up to 20 network & coax ID - only mapping remotes
- View saved cable tests
- Full color graphical wire-mapping
- Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)
- Multilingual (English, French, Spanish)
Specifications
| SPECIFICATIONS | |
|---|---|
| Measurement Technology | Time Domain Reflectometry (TDR) |
| Cable Measurements |
Cable Testing and ID: up to 1,000ft (305m) Split Pair Detection: 3ft (1m) to 1,000ft (305m) Length Measurement: 0 to 1,500ft (457m), +- (5% +1ft) Supports 20 RJ45 and 20 F connector ID only remotes |
| Power over Ethernet |
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE Tests for classes and loads cable up to 25.5 watts at class 4 Identifies Mode A or B (pairs with PoE) |
| Active Ethernet | Indicates advertised speeds of 10/100/1000base-T half or full duplex. Can link to network at 10/100base-T |
| Maximum Voltage |
RJ Jack: 66 VDC or 55 VAC F Connector: 50 VDC or VAC Refers to the max voltage that can be applied to any 2 connector pins without damaging the tester |
| Save Test Results | Stores up to 250 cable or network tests with user defined names |
| Tone Generation | Tone frequencies: 730 Hz and 1,440 Hz |
| Languages | English, French, Spanish |
| Battery Life |
For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery Operating - 20 hours typically Standby - 1.5 years typically (200uA max standby current) Batteries are included |
| Altitude | 10,000 ft. (3,048m) |
| Temperature |
Operating Temperature: 32 to 122 degrees F (0 to 50 degrees C) Storage: -22 to +140 degrees F (-30 to 60 degrees C) |
| Humidity | 10 to 90% non-condensing |
| Enclosure | High-strength PC/ABS plastic with V0 rating with boot Withstands 4 foot drops onto concrete |
| Size | 1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm) |
| Weight | With batteries: 1 lb 2 oz (510 g) |
| Safety Compliances | CW |
| Warranty | 1 Year |
What's In The Box
- Cable Prowler main unit
- #1-8 Network/Tel Test and ID Remotes
- #1-8 Push on Coax Remotes
- #1-12 RJ45 Data Remote set
- Micro USB cable
- No-Fault cable - Qty 2
- RJ45 Port Saver
- RJ45 to Alligator 12 inch
- F Female to F Female adapters, set of 2
- BNC Female to F Female adapter
- BNC Female to F Male adapter
- Heavy duty case