Skip to content
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.

MPO/MTP®-LC Cassette Module, Multimode 10G OM4 50/125, LGX Footprint, Type A, 24 LC Ports

Sold out
$309.99
SKU: FB43-1305-24FMM

This MPO/MTP® Cassette Module is compatible with all LGX patch panels.


Description

MPO/MTP® to LC Cassette Module, Multimode OM4 50/125, Type A, 24 LC Ports

The 12 and 24 fiber MPO/MTP® to LC cassette is built specifically for high density fiber cable data solutions. This LGX style MPO/MTP® cassette will match the LGX universal footprint and fits most LGX style fiber patch panels.

The MPO/MTP® cassette comes pre-terminated with either 12 of 24 LC connections on the front panel and one 12 fiber MPO/MTP® connection or two 12 fiber MPO/MTP® connections in the back. Inside the MPO/MTP® cassette there is either one or two 12 fiber harnesses that breakout from the LC connector in the front to the MPO/MTP connector in the back, giving a quick and easy plug-and-play data solution.

Features

  • Type A Polarity
  • MPO/MTP® to Duplex LC Connections
  • Multimode 10G OM4 50/125 Fiber Type
  • Available in 12 or 24 Fiber Counts
  • LGX Style Footprint
  • quick and easy plug-and-play data solution

Specifications



Width: 5.12" (130mm)
Height: 1.14" (29mm)
Depth: 5.06" (128.6mm)

Additional Information

MTP® High Density Cassettes

A cassette is a packaged, pre-terminated cabling assembly that transitions from multi-fiber cables and array connectors to traditional single-fiber connectors. Our cassettes are fitted with 12 or 24 LC Connections on the front and one or two 12-fiber MTP®/MPO adapters on the back depending on if they are 12 or 24 fiber. The type of adapter mounted at the rear of a cassette defines it as either a Type A or Type B MTP®/MPO modular cassette.

Type A Cassette

Type A MTP®/MPO cassette uses a “key up to key down” adapter connection between the internal MPO/MTP® connector and the MPO/MTP® array cable connector.

Type A Cassette

Type B Cassette

Type B MTP®/MPO cassette uses a “key up to key up” adapter connection between the internal MPO/MTP® connector and the MPO/MTP® array cable connector.

Type A Cassette

Note: Method A cassette works for both single-mode and multimode channels, while there is a limitation of Method B cassette: it doesn’t allow the use of an angled polished (APC) single-mode connector.