Cable Management Accessories

The No-Hassle, Low-Cost THE LOOP™ Cable Hanger Flexible and non-metallic, The LOOP® provides sturdy, reliable support of CAT 5, 6 or 7 – or fiber optic cable without sagging, bending or damaging the cable! The LOOP holds up to a 5" diameter bundle of cable. The LOOP® is Fast and easy to use and cost less than cable trays. It can be used on Single or multiple LOOP hangers mount in a variety of ways and rotate to any angle. Sizes/Cable Holding Capacity: 2" NPNB-TL20 holds a 2" bundle about 60...

Cable Standoff Mounts on Metal or Wood Studs, Black: Simply position the CS6 in the desired location and insert a sheet metal screw into a steel or wood stud or use a nail in a wood stud. Cable or cables can then be placed between serrated forks. Install mating washer over serrated forks to secure cable/cables.

Nail/Screw in Cable Standoff Mounts Vertical or Horizontal 1- 14/3 to 1- 10/3, 3- 14/2 W/G to 3- 10/3, Black: Positions cables at a safe distance from nailing surface. Provides a neat, organized cable installation, and prevents tangles. Positions non-metallic, flat or round sheathed cable, phone/data cable, and coaxial cable at a safe distance from nailing surface of furring strip or stud. Installs with a screw or nail (nail included). UL/CSA Listed. Cable Standoff Holds: One 14/3 to one 10/3...

Non-Metallic Bushing for Metal Stud 1" Knockout: These patented non-metallic bushings fit a 1" knockout – and existing irregular shaped holes in metal studs. They alleviate the need to punch holes in the studs, and the possibility of weakening the structural member. UL/CSA Listed.

Non-metallic ‘D’ Ring, Black: This non-metallic Non-conductive Smooth bearing surface D-Rings allow installers to manage multiple cables, while keeping the (cable) bundle orderly and neat. Non-conductive. Smooth bearing surfaces for easy wire management. Two mounting holes per side allow for several mounting methods. Protects conductor insulation against damage and features multiple size wiring space.

Non-metallic Cable Standoff w/Lock, Black: Positions non-metallic, flat or round sheathed cable, phone/data cable, and coaxial cable at a safe distance from nailing surface of furring strip or stud. Installs with a screw or nail. UL/CSA Listed. Features positive lock to keep cables in place. One CS7 Holds: Up to 5 runs of 12/2 non-metallic sheathed cable. Up to 8 runs of Cat 5 cable. Up to 4runs of Cat 6 cable. Up to 5 runs of coaxial cable.

Plastic Snap-in Bushings Black: All-plastic, these snap-in type bushings protect cable as it runs through the knockouts in junction boxes or through holes in drywall. UL/CSA Listed.

Plastic Wire Bushings for Class 2 Wire - White: Get a great-looking job and easy, smooth insertion of cable through drywall with Arlington’s new paintable plastic WIRE BUSHINGS! Offered in four sizes (1/2", 3/4", 1", 2"), these bushings offer quick installation with a drill bit or a hole saw – and easy entry and exit of low voltage cable or speaker wire through drywall.

Press fit Non-Metallic Conduit cap and insulating bushing - Yellow: These non-metallic Insulating Bushings are use to seal off conduit during concrete pours. Then remove cap/seal with razor knife or use screwdriver to punch hole in cap.

Press fit Non-Metallic Insulating Bushings for EMT/Rigid Conduit: These non-metallic Insulating Bushings protect cable from abrasion when using EMT conduit. They press fit onto conduit, and hold firmly in place, when cable is pulled through. They can be substituted for costly fittings when used for cable protection only. Uses include power, computer data lines, cable TV, audio/video cables, phone/modem, or alarm/security systems.

Plastic Split D Ring, Cable Management Accessory This Plastic Split D-Ring from Dynacom allows installers to manage multiple cables, while keeping the cable bundle orderly and neat. Plastic Split D Rings also protect the conductor's insulation from becoming damaged. The smooth plastic surfaces allow for easy wire management as it can easily slip over the cable jackets. The Plastic Split D Ring contains two mounting holes per side and can be mounted several different ways depending on the...

The No-Hassle, Low-Cost THE LOOP™ UV Rated Cable Hanger Flexible and non-metallic, The LOOP™ provides sturdy, reliable support of CAT 5, 6 or 7 – or fiber optic cable without sagging, bending or damaging the cable! The LOOP™ holds up to a 5" diameter bundle of cable. The LOOP™ is Fast and easy to use and cost less than cable trays. It can be used on Single or multiple LOOP™ hangers mount in a variety of ways and rotate to any angle. It is UL/CSA Listed for environmental air handling spaces per...

The SPACER™ Nail-On & Screw-On Non-Metalic Cable Spacer: The SPACER™ is a new non-metallic Cable Spacer that holds power or low voltage cable securely and centered on a 2x4. It is perfect for routing, fastening and positioning power or datacom cables. It holds a single or double row of up to eight cables securely between the forks. Installation is quick and easy. Just nail or screw The SPACER to a wood or metal stud.

Adhesive Backed Cable Holders - 9 PackKeep cables and cords in place with the Adhesive Backed Cable Holders. These self-sticking, rounded holders have a “mouth” to hold cables in place and avoid being tangled with other cables. They are made of a soft plastic material to help prevent damage or wearing of the cables. Once the holder is put in place, it will be a permanent hold for your cables. The Adhesive Backed Cable Holders are suitable for cables within a Wall Mount Charging Station,...

Spiral Zip Wrap, Length 1.5 m (4.92ft.) The Spiral Cable Zip Wrap is the most efficient way to organize and protect your wires and cables. With the Zip Wrap, you can consolidate multiple cables into one single neat solution and eliminate any potential accidents that can be caused by loose cables. It can be used to bundle up PC Cables from behind the desk and improve the overall appearance of your system. It not only protects cables from abrasion, but allows breakouts of single or multiple...