#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Ground Bus Bars and Grounding Equipment

Primus Cable offers grounding equipment like bus bars and grounding blocks to help you protect your network. A ground bus bar is basically a strip of metal that all grounding wires are connected to serving to direct needless current away from sensitive network components. Ground bus bars are generally composed of copper, brass, or aluminum. Ground bus bars are frequently used in low voltage distribution and control equipment. It is commonly mounted directly onto the server rack to isolate excess electric current from network devices.

Primus Cable carries both wall mount and rack mount ground bus bars. The Ground Bus Bar, Wall Mount by Damac comes in 10” and 20” lengths. Ground bus bars are composed of hard drawn electrolytic tough pitch solid 110 copper alloy. Different sizes and various hole patterns are available to accommodate your installation’s bonding system. Wall mounted ground bus bar includes a 10" x 4" or 20" x 4" copper grounding bar and all mounting hardware needed.

Primus Cable supplies a wide array of CAT 6 Ethernet Cable to complete your networking project. While most CAT 6 cable only reaches speeds up to 250MHz, our state of the art CAT 6 Ethernet cable is tested up to 550MHz. It also adheres to the highest standards recognized by the industry, and is either UL listed or ETL verified. Our CAT 6 Ethernet cable is available for outdoor, indoor, direct burial, aerial, shielded, and unshielded applications.

We also provide CAT 6 Ethernet Patch Panels, Pre-Loaded for Networking. Primus Cable offers CAT 6 patch panels in 12, 24, 48, and 96 port configurations in 1U, 2U, and 4U styles. They are made of 16 gauge steel with rounded edges. The jack adapter contacts are made of gold plated brass while the termination contacts are steel plated nickel for optimal performance. They are designed to fit all standard 19” racks and cabinets.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-3 of 3
Show
Network Rack, Grounding Bar, Rack Mount, 19"

Price: $88.46
View
Availability: In Stock
DAMAC Item #: RA-D18-2619-B19 -

    19” Rack Mount Ground Bus Bar for Networking Ground Bus Bars are made from Hard-Drawn Electrolytic Tough Pitch 110 Alloy solid copper and are used to ground and isolate electrical currents of rack-mounted equipment. Its flat strip design allows heat to dissipate more efficiently due to its high surface area to cross-sectional area ratio. The Bus Bars are best protected from accidental contact either by a metal enclosure or by elevation out of normal reach. The 19” Bus Bar can handle the...

    10" Bus Bar, Wall Mount

    Price: $169.23-$250.00
    View
    Availability: In Stock
    DAMAC Item #: RA-D18-####-BB -

      Wall Mount Ground Bus Bar for Networking Ground Bus Bars are made from Hard-Drawn Electrolytic Tough Pitch 110 Alloy solid copper and are used to ground and isolate electrical currents of rack-mounted equipment. Different sizes and various hole patterns are available to accommodate your installation’s bonding system. Wall mounted bus bar includes a 10" x 4" or 20" x 4" copper grounding bar and all mounting hardware needed. Its flat strip design allows heat to dissipate more efficiently due to...

      Network Rack, Grounding Block

      Price: $23.08
      View
      Availability: In Stock
      DAMAC Item #: RA-D8-4850-GB -

        Relay Rack Grounding Block Grounding blocks are used to ground and isolate electrical currents of rack-mounted equipment. Server racks can be potentially dangerous to consumers and equipment if not properly grounded. By adding these easy-to-use Ground Blocks you can save space while increasing safety at the same time. The small size of the grounding block allows it to take up as little space possible, while still being able to safely ground any harmful currents.