#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Wire Cable Tray

Wire Cable Trays for Networking

The wire cable tray is used to support electrical systems by providing a secure bridge passageway for cable networks. A cable tray is more organized and efficient, as well as more dynamic than conduit systems. Primus Cable offers wire cable tray systems that are cost effective and NEC compliant.

Save both time and money with the PRO-10™ cable tray system, it is industry recognized by engineers and contractors. These wire cable tray systems install without cutting or bending required in the field. Pre-fabricated fittings reduce installation times by as much as 50%, and only one tool is required for installation.

Benefits of the PRO-10™ Wire Cable Tray System:

  • Pre-fabricated Fittings Reduce Installation Time by as Much as 50%
  • Only One Tool Required for Most Installations
  • Large Load Tested Capacity
  • Industry Compliant Bonding and Splicing Built-in
  • Powder Coat Finish for Long Lasting Durability
  • Adapts to Complex Architectural Designs

Some of these PRO-10™ wire cable trays are UL classified and NEC compliant for a zinc free environment. They are also manufactured of 95% eco-friendly recycled materials. Primus Cable offers wire cable trays for straight sections, elevation changes, junctions, and drops. The PRO-10 Straight Section of Wire Cable Tray, 5' Long, 2" Deep is made of an innovative steel mesh design with built-in splice/bonding loops. This design enables efficient, quick installation, which costs less labor and materials.

This cable tray measures 5’ long, by 2’ deep, and can be easily configured around obstacles. Primus Cable’s cable trays for straight sections are available in sections from 1’ to 10’ in length, and from 2” to 6” in depth. Ultimately, our cable trays will save you money.

Primus Cable provides reducer cable trays to carry your networking cable from a larger cable tray to a smaller one. The PRO-10 Wire Cable Tray Reducer, 2' Long, 2" Deep measures 2’ in length, and is 2” deep. The built in splice/bonding loops enable quick installation, and it can be easily configured to fit around obstacles. Our reducer cable trays measure from 2” to 6” in depth.

Wire cable tray junctions allow you to route your networking cable in multiple directions as needed. The PRO-10 Wire Cable Tray "T" Junction, 2" Deep is 2” deep, and is made to handle a wide variety of applications. This cable tray is commonly used for instrumentation cables, security wiring, and electrical distribution. We offer junction cable trays measuring from 2” to 6” in depth in a “T” configuration. We also have 4 way junction and “L” junction cable trays.

Another cable management solution offered by Primus Cable is the wire cable tray drop. The PRO-10 Wire Cable Tray 9" Elevation Change, 2" Deep includes three sections intended to route cable from trays of varying heights. This unit is easy to configure to fit around obstacles, and comes in 12”, 18”, and 24” drop sizes. The depth of these wire cable trays varies from 2” to 6”.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-25 of 25
Show
CM20 Straight Section of Wire Cable Tray

Price: $9.78-$138.84
View
Availability: Call for Pricing
Wiremaid Item #: CM-W1-####-###-XX -

    PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

    CM25 Wire Cable Tray T-Junction

    Price: $79.66-$118.13
    View
    Availability: Made to Order
    Wiremaid Item #: CM-W3-####-X# -

      PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

      CM25 Wire Cable Tray Drop

      Price: $50.37-$69.43
      View
      Availability: Call for Pricing
      Wiremaid Item #: CM-W4-51##-#### -

        PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

        CM29 Wire Cable Tray Reducer

        Price: $50.02-$56.37
        View
        Availability: Call for Pricing
        Wiremaid Item #: NPNB-CM29##X062# -

          PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

          CM25 Wire Cable Tray 4-Way Junction

          Price: $79.66-$118.13
          View
          Availability: Made to Order
          Wiremaid Item #: CM-W3-5676-T6X -

            PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

            CM25 Wire Cable Tray L-Junction

            Price: $79.66-$118.13
            View
            Availability: Made to Order
            Wiremaid Item #: CM-W3-5####-L## -

              PRO-10 Wire Cable TrayPRO-10 Cable Tray innovative steel mesh design with built-in splice/bonding loops enables faster installation with less labor and materials. Easy to engineer and identify individual fittings and/or parts. PRO-10 Cable Tray is easily configured around obstacles and allows vertical changes. The straight sections and fittings address the entire range of applications. Installation savings generally start at 50% and move higher dependent on the installation environment.PRO-10...

              Wire Cable Tray Center Support Kit

              Price: $10.48-$13.55
              View
              Availability: Made to Order
              Wiremaid Item #: NPNB-05-5002-XX -

                1⁄4” Threaded Rod KitThis center support kit is made to suspend our wire cable trays from the ceiling using a 0.25" threaded rod.Includes:(1) support bracket(1) hold down bracket(2) 1⁄4” flat washers(2) 1⁄4” nuts(1) 6” silicone protective tubesAll mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware. ...

                Wire Cable Tray Trapeze Support Kit

                Price: $9.90
                View
                Availability: Made to Order
                Wiremaid Item #: NPNB-05-5206-XX -

                  1/4” Threaded Rod KitThis trapeze support kit is made to suspend our wire cable trays from the ceiling using two 0.25" threaded rods.Includes:(1) support bracket(1) hold down bracket(2) 1⁄4” finned nuts(4) 1⁄4” flat washers(4) 1⁄4” nutsAll mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware. ...

                  Wire Cable Tray Floor Support Kit

                  Price: $6.96
                  View
                  Availability: Made to Order
                  Wiremaid Item #: NPNB-05-5602-X -

                    Raised Floor Support Kit for Wire Cable TraysThis under floor support kit is a free standing support for our wire cable trays for use under raised flooring and is used to secure tray sections to all supports. Material is steel wire powder coated 4” long and availible in various colors. Hold down included with all wall, floor, and ceiling supports. Order extras only.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or...

                    Wire Cable Tray Wall Mount Support Kit

                    Price: $6.96
                    View
                    Availability: Made to Order
                    Wiremaid Item #: CM-W5-5053-2 -

                      Wall Mount Support Kit for Wire Cable TraysThis wall mount support kit is to be used with our wire cable trays for wall mounting applications.All mounting hardware should be used every 5 feet in a given direction from the previous mounting hardware.

                      Wire Cable Tray L Support Bracket

                      Price: $7.19
                      View
                      Availability: Made to Order
                      Wiremaid Item #: NPNB-05-CM18-04201 -

                        L-Support Bracket for Wire Cable TraysThis L support bracket provides support for wire cable trays without the use of a threaded rod.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support.

                        Wire Cable Tray C Support Bracket

                        Price: $7.66
                        View
                        Availability: Made to Order
                        Wiremaid Item #: CM-W5-5107-6 -

                          C-Support Bracket for Wire Cable TraysThis C support bracket provides support for wire cable trays without the use of a threaded rod.All mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support.

                          Wire Cable Tray Angle Pedestal Support Kit

                          Price: $24.60
                          View
                          Availability: Made to Order
                          Wiremaid Item #: NPNB-05-CM74-3 -

                            Angle Pedestal Support Kit for Wire Cable TraysThe angle pedestal support kit mounts to the vertical legs of a raised floor system and provides flat surface for cable tray to sit on.Includes(2) Angle Supports(2) "U" clamps. Clamps fit up to a 1-1/2” diameter pedestalAll mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support. ...

                            Wire Cable Tray Pedestal Bridge Support Kit

                            Price: $19.43
                            View
                            Availability: Made to Order
                            Wiremaid Item #: NPNB-05-CM75-3 -

                              Pedestal Bridge Support Kit for Wire Cable TraysThe pedestal bridge support kit is a cable tray "hammock" and spans between two raised flooring legs for the cable tray to rest on.Includes (1) Bridge Support (spans 24 inch center to center floor pedestals up to 1-1/2" diameter)(2) "U" clampsAll mounting hardware and supports should be used every 5 feet in a given direction from the previous mounting hardware or support. ...

                              Wire Cable Tray Cover

                              Price: CALL
                              View
                              Availability: Call for Pricing
                              Wiremaid Item #: NPNB-05-CM21-04 -

                                Cover for Wire Cable Trays Wire cable tray covers prevent build up of dust and particles on cabling while protecting cables from being crushed by items that may fall into cable trays. Available in 7 standard colors for color-coding cable tray installations: Safety Yellow, White, Chrome, Black , Red, Blue, and Orange.Powder coated to provide a smooth protective surface for cables.Can be supplied pre-assembled to cable trays or installed in the field. #05-2-500985 Splice Washer Assembly,...

                                Pressed Beam Clamp

                                Price: $0.98-$3.66
                                View
                                Availability: In Stock
                                Primus Cable Item #: JH-####-BC -

                                  Pressed Beam Clamp Zinc-plated steel Pressed Beam Clamp for flanges up to 1/2" or 3/4" thick such as I-beams. Secure the Pressed Beam Clamp to a beam flange with the included bolt. The Pressed Beam Clamp is ideal for hanging ceiling wires. High quality all steel construction. Has both threaded and non-threaded holes to accommodate jack chain, ceiling wire, or threaded rod.

                                  Wire Cable Tray Solid Bottom Plate

                                  Price: CALL
                                  View
                                  Availability: Call for Pricing
                                  Wiremaid Item #: NPNB-05-2-06BP -

                                    Solid Bottom Plate for Wire Cable Trays Wire cable tray solid bottom plates provide a flat surface to make installing and pulling cables much easier. Because of the smooth surface cables can slide across it with ease not allowing cables to get caught within the wire frame. The Solid Bottoms are used primarily for instrumental control, communication and other non-heat producing cable.Powder coated to provide a smooth protective surface for cable pullingCan be supplied pre-assembled to cable...

                                    Wire Cable Tray Divider

                                    Price: CALL
                                    View
                                    Availability: Call for Pricing
                                    Wiremaid Item #: NPNB-05-2-500983 -

                                      Tray Divider for Wire Cable Trays Wire cable tray dividers help route cables to different locations inside a single cable tray. Dividers are made from powder coated steel and are 5’ long. (Two Splice Washer Assembly Kits used to secure to each tray section included)

                                      Wire Cable Tray Hold Down Bracket

                                      Price: $2.60
                                      View
                                      Availability: Made to Order
                                      Wiremaid Item #: NPNB-05-2-500982 -

                                        Hold Down Bracket for Wire Cable TraysHold down brackets are used to secure wire cable tray sections to all supports. Material is steel wire powder coated chrome color 4” long.

                                        Wire Cable Tray Splice Washer Kit

                                        Price: $1.31
                                        View
                                        Availability: Made to Order
                                        Wiremaid Item #: CM-W5-5422 -

                                          Splice Washer Kit for Wire Cable TraysThe cable tray straight and junction sections are easily joined together using installer-friendly splice washer kits. The kit contains one 1/4”- 20 bolt washer, one splice washer, and one flanged hex nut. Material is zinc plated steel.

                                          Wire Cable Tray Waterfall

                                          Price: $9.78
                                          View
                                          Availability: Made to Order
                                          Wiremaid Item #: CM-W5-5095-X -

                                            Waterfall for Wire Cable TraysWaterfalls attach to wire cable trays to help direct cables to their intended destinations.Dimensions: 4.125"H x 3.75"W x 6.1875"L (other widths available upon request)

                                            Wire Cable Tray Extension Offset Loop

                                            Price: $2.49
                                            View
                                            Availability: Made to Order
                                            Wiremaid Item #: NPNB-05-CM58 -

                                              Tray Extension Offset Loop for Wire Cable TraysDuring some installations, there may be sections that do not meet. The offset loop was designed for this. The offset loops bolt to the existing loops on the tray. When attached to both ends of a section, a lateral adjustment of up to 12” is possible. To adjust, slide the cable trays, fittings or offset loops to meet and then tighten the flange hex nuts.

                                              Wire Cable Tray Universal Loop

                                              Price: $2.49
                                              View
                                              Availability: Made to Order
                                              Wiremaid Item #: NPNB-05-CM7002 -

                                                Universal Loop for Wire Cable TraysThe universal loop is to be used in conjunction with the extension offset loop for a slight vertical offset.

                                                Wire Cable Tray Coupling Nut

                                                Price: $0.72
                                                View
                                                Availability: Made to Order
                                                Wiremaid Item #: NPNB-05-CM60 -

                                                  Coupling Nut Coupling nut for assembling wire cable trays and are threaded fastener for joining two male threads, most commonly threaded rod. The outside of the fastener is hex so a wrench can hold it. These Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods. The rods are threaded into the coupling nut for certain distance and are available in 1/4"-20 and 3/8"-16.

                                                  Cable Hanging Tool for Magnetic J-Hooks and Bridle Rings wire cable tray, cable management, wire cable basket, beam clamp

                                                  Price: $5.78
                                                  View
                                                  Availability: In Stock
                                                  Mag Daddy Item #: TL10-1815 -

                                                    Cable Hanging Tool for Magnetic Cable Management Hardware The Cable Hanging Tool is used to safely install magnetic cable management solutions like J-Hooks, bridle rings, and cable holder brackets. The tool can be attached to an extension pole to install cable management devices from the safety of the ground. Will fit with 1/4" rods or extension poles.