Skip to content
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.

F-Type Male RG11 Coax Cable Connector ProSNS TM Universal Hex Head 7/16in, Black Ring - 25pc Bag

by Belden
$116.00
SKU: CN2-7890-11

Former Part Number: CN2-4942-11

Description

Standard/Quad Shield ProSNS™ F-Type RG11 Coax Cable Connector

The ProSNS™ Universal RG11 F Connector boasts Belden's superior return loss standards for enhanced impedance stability and reduced signal loss. It ensures quick, reliable terminations ideal for CATV, DSS, Security, Home Theater, and Residential Structured wiring. This compression connector features an air dielectric and a universal 7/16" nut, offering increased thread count for weather-tight, secure terminations with enhanced pull-out strength in a simple, one-piece design. Simplify your coaxial cable installations with this professional-grade connector.

Where to use Coaxial Cable

A broad range of applications exist for coaxial cabling. It is widely used with home entertainment equipment such as Cable Television (CATV), Digital HDTV, Audio / Video, and Digital Satellite. It is also used with security cameras, and GPS Systems.

Applications

Coaxial cable is used to transmit radio frequency energy. The advantage of coaxial is that the electromagnetic field carrying the signal occurs only in the space between the inner and outer conductors, allowing the cable to be installed next to metal objects without power loss. Coaxial cable also provides protection of the signal from external electromagnetic interference. Coaxial Cables connects radio transmitters and receivers to their antennas, computer network (Internet) connections, digital audio (S/PDIF), and distributes cable television signals.

Features

Features

  • For use with RG11 coaxial cable
  • 75 ohm impedance
  • Simplified installation
  • Universal 7/16" nut
  • 30% more threads
  • Secure, weather-tight termination
  • Increased pull-out strength
  • One-piece design

Specifications

Specifications

Additional Information

Installation Instructions

Cable Preparation:

FS11V Diagram
Figure 1

Use our TL5-3485 or an industry standard 1/4 x 1/4 cable prep tool. Assure that the braid is folded back onto the jacket as shown in Figure 1.

Connector Installation:

Push the center conductor into the gold center pin and install the connector onto the cable until you see the plastic pin protrude from the nut. Remove the plastic pin and verify that the center pin protrudes slightly past the end of the nut. You will not see the cable dielectric on the inside of the nut.

Position the connector into the tool as shown below:

FS11V 01 FS11V 02

Activate the tool and ensure there is no gap after termination:

FS11V 03 FS11V 04

What's In the Box

What's In the Box

  • Qty 1 - 25pc Bag RG11 F-Type Connectors - Universal Male ProSNS™ 7/16in