Wire & Cable Management
Having well-organized cables improves your networking systems ability to have future maintenance done easier and more efficiently. Our ethernet cable organizers improve cable maintenance time and reduces the downtime of your network, which can save you money. Making the right investment into appropriate wire and cable management devices and tools will keep your network cables safe and secure.
Cable Ladder Racks
A cable ladder rack system routes networking cables along runways, keeping them organized along ceilings, walls, and floors. Organizing cables is important for any data network, as they can present a safety hazard if left unchecked. Cable ladder racks make reconfiguring or troubleshooting network connections efficient, while protecting wiring from elemental conditions and pests.
Cable Management Accessories
We provide a wide selection of cable management solutions to complement your cable ladder racks, and network equipment. Our cable management solutions increase productivity, improve quality of network installation, and prevent damage to your system components. We carry D-rings in 2 ¼” x 2”, 3 ¼” x 3 ¼”, and 3 ¼” x 5” configurations.
Cable Runway Support System
Cable runways secure networking cables in an out of the way, dry location to protect your data network. We provide cable runways and components to build a reliable support system for your network cables. CableWay™ cable runway support system components manufactured by Arlington are available for power and low voltage cable. We provide CableWay™ support trays, angled corner components, adapters, and support components to augment your cable runway.
Cable Tie Mounts
Cable tie mounts utilized along with nylon cable tie are commonly used to secure networking cables. This keeps cables mounted along walls, ceilings, and out of the way places, minimizing clutter. Our cable tie mounts feature rubber based adhesive, and a patented stay-n-place tab. This tab keeps the cable tie head from sliding down during vertical applications.
Hanging Hardware Solutions
Hanging Hardware Overhead cable management is another means of keeping networking cables organized and out of the way. Having a cable hanging system established helps maintain a clean and safe workspace. We offer a wide assortment of hanging hardware for your cable management system including angle clips, beam clamps, drive rings, threaded rod couplers, and more.
Heat Shrink Tubing
Heat shrink tubing provides environmental protection for electrical components such as wire bundles, wire splices, and harness breakout. Heat shrink tubing molds itself to the cable, protecting it from environmental factors and harmful liquids including: water, oils, acids, and alkalis. Our heat shrink tubing is composed of adhesive lined black polyolefin.
Hook And Loop Cable Ties
Hook and Loop Cable Ties secure networking wires and cables while keeping them organized. We have a broad selection of high-quality Hook and Loop Cable Ties that are sufficient for residential and commercial use.
J Hooks
Versatile and inexpensive, j-hooks build the pathway for cable hanging support for your network. We supply cable j-hooks for stress relief and support for light and medium duty cable management. These work well with bulk Ethernet cable, coaxial cable for security networking, and fiber optic cable.
Nail-In Clips
Suitable for both indoor and outdoor usage, our nail-in cable clips are made to accommodate most types of networking cable. We have cable clips to fit Ethernet cable, RG59 and RG6 coax cable, and security/speaker wire. The nail-in cable clips have diameters ranging from 6mm to 8mm. Install nail-in cable clips along your cable run every 12-18 inches for a tight installation on walls, baseboards, and ceilings.
Networking Cable Sleeves
Cable sleeves provide a means of additional security for electrical wires and cable of many types. We supply cable sleeves offering abrasion resistance and flame resistance. Although more commonly used for industrial applications, cable sleeves are used for a wide variety of cable including Ethernet, coax, and fiber.
Nylon Cable Ties
Keep your cable network organized and secure with nylon cable ties. Not only does it keep cables untangled but also makes them easier to identify, making network maintenance more efficient. Nylon cable ties can support from 18 to up to 50 pounds of cable. We have the solution for just about any cable management application.
Raceway Molding
Cable raceway molding provides protection and an aesthetically pleasing appearance to your cable runs. Keep your networking cable uncluttered and organized with our fine selection of cable raceway and wire covers. Cable raceway is an attractive cable management solution, blending into walls and ceilings for a discreet, sleek appearance.
Network Rack Accessories
Effective cable organization involves more than just the combination of cable raceway, ladder racks, and server racks. Sometimes it’s the little things, like server rack accessories that bring the network components together. We stock an assortment of rack accessories including: D-ring cable managers, horizontal and vertical cable managers, cable management duct covers, and cable routing banks, just to name a few.
Slack Storage Devices
The Sno-Shoe is a cable management solution with a two-fold purpose: to protect fiber optic cable in an organized manner, and to store unused cable while keeping it out of the way. We offer Sno-Shoes like the Plastic Adjustable Sno-Shoe with Aerial Mounting Bracket & Hardware, 16". It allows you to store fiber optic cable in the air.
Wire Cable Tray
The wire cable tray is used to support electrical systems by providing a secure bridge passageway for cable networks. A cable tray is more organized and efficient, as well as more dynamic than conduit systems. We offer wire cable tray systems that are cost effective and NEC compliant.
If you have any questions, feel free to give us a call or email us.
-
$15.00
1U Flat Spacer Blank
RP-K12-3388-1UKendall HowardDescription 1U Flat Spacer Blank The 1U Flat Spacer Blanks are a cut above the rest. Spacer Blanks are often used as a way to fill in any gaps an...
View full details$15.00Sale -
from $6.50
3" Steel Ring Cable Manager, 1U
NPNB-RAMSRG1Primus CableDescription 3" Steel Ring Cable Manager This 3” Steel Ring Cable Manager is designed to mount on the sides of racks and on equipment mounting rail...
View full detailsfrom $6.50Sale -
$12.65
3in Eye Lag Screw, 1/4in Hole, Wood Application, 100pc Box
JH-4254-3ESPrimus CableThese products are all Made to Order Which means they are non-cancelable and non-refundable Description 3" Eye Lag Screw 1/4" 100pc box The 3"...
View full details$12.65Sale -
from $8.99
5-Ring Cable Management Panel, 1U, 2U, Low-Profile
PP4-314/5R/1UPrimus CableDescription 5-Ring Cable Management Duct Our 5-Ring Cable Management Ducts are an easy to use cable management solution for horizontal network rack...
View full detailsfrom $8.99Sale -
from $5.75
90° Angle J-Hook with Retainer Bar
JH1-6675-12APrimus CableDescription 90° Angle Bracket Attachment J-Hook with Retainer Bar Our Standard J-Hooks support up to 50 lbs and are perfect for hanging applicat...
View full detailsfrom $5.75Sale -
$22.00
Adhesive Backed Cable Holders - 9 Pack
NPNB-0300-1-003-00Kendall HowardDescription Adhesive Backed Cable Holders - 9 Pack Keep cables and cords in place with the Adhesive Backed Cable Holders. These self-sticking, roun...
View full details$22.00Sale -
$18.89
Aluminum Wedge Clamp For Aerial Cable
WC-6755-26Primus CableDescription Aluminum Wedge Clamp Our Aluminum Wedge Clamps are designed to reduce the strain of sagging overhead Aerial Cables. This type of clamp ...
View full details$18.89Sale -
from $6.27
Batwing J-Hook with Retainer Bar
JH1-6679-12WPrimus CableDescription 3/4"-4" Batwing J-Hook with Retainer Bar Our Batwing J-Hooks support up to 20 lbs and are perfect for hanging applications. This J-H...
View full detailsfrom $6.27Sale -
from $7.25
Beam Clamp J-Hook
JH1-6697-12BCPrimus CableDescription J-Hook with 1/4" Beam Hook Attachment Our Beam Clamp J-Hooks can swivel 360 degrees to secure the hook at any rotation. This J-Hook ...
View full detailsfrom $7.25Sale -
$12.95
Butt Splice Kit - Straight - Cable Ladder Rack System
LR-4809-BSPrimus CableDescription Butt Splice Kit - Straight - Cable Ladder Rack System This Butt Splice Kit is used to connect or to fasten two ladder sections end to ...
View full details$12.95Sale -
from $13.00
Cable Drop - Wire Basket Drops
CM-W5-4775-175Primus CableDescription Cable Drop Maintain minimum cable bend radius when dropping cable from a basket tray run down to a cabinet with this Cable Drop. Use t...
View full detailsfrom $13.00Sale -
$22.99
Cable Ladder Rack Slotted Support Bracket, 5/8in
LR-4842-SSBPrimus CableDescription Slotted Support Bracket Our Slotted Support brackets facilitate hanging cable ladder racks from a ceiling. This bracket secures to a ca...
View full details$22.99Sold out -
$20.19
Cable Ladder Rack Wall Clamps
LR-D17-4822-WCPrimus CableWall mounting hardware is not included. Description Wall Mount Hold Down Brackets for Cable Ladder Racks Wall Mounting Clamps are a quick and easy...
View full details$20.19Sale -
from $22.00
Cable Routing Blank
RP-K12-3366-1UKendall HowardDescription Cable Routing Blank Cable Routing Blanks make it easy to pass cables from the front of a server rack or cabinet to the back and still ...
View full detailsfrom $22.00Sale -
$11.72
Cable Runway Wall Mount CableWay
T23WArlingtonDescription Cable Runway Wall Mount Our Cable Runway Support Bracket is designed to be installed as a support bracket, offering time-saving bene...
View full details$11.72Sale -
$15.06
CableWay Cable Runway T Adaptor
T23TArlingtonDescription Cable Runway T Adaptor Our Cable Runway T Adaptor is designed to split a cable run into two separate directions, offering time-sav...
View full details$15.06Sale -
from $22.28
Conduit Hanger With Bolt and Nut, EMT - RIGID
NPNB-CH50Primus CableDescription Conduit Hanger With Bolt and Nut, EMT - RIGID These conduit hangers are used in both wet and dry locations to support various run size...
View full detailsfrom $22.28Sale -
$20.00
Corner Splice Kit - Wire Basket Splicing
NPNB-VBT-SC-BPPrimus CableDescription Corner Splice Kit This kit provides support at horizontal 90-degree turns and tee junctions. Each kit includes one right-angle bar spl...
View full details$20.00Sale -
from $7.00
Cross Bar - Wire Basket Ceiling Mounting
NPNB-VBT-BU100-BPPrimus CableDescription Cross Bars Cross bars can be suspended from the ceiling to provide overhead support for basket tray runs. Features Features Compatib...
View full detailsfrom $7.00Sale -
from $17.00
D-Flanged Lacing Bar
RP-K12-969-DFLCB3Kendall HowardCage nuts and rack screws are required for installation into Racks, Enclosures or Cabinets. Description D-Flanged Cable Lacing Bar Our D-Flanged C...
View full detailsfrom $17.00Sale -
$17.24
E-Z Duct Connector Combo Pack (For E-Z-58 Raceways), 2 each, white
E-Z 58 COM-WGRIDescription E-Z Duct Connector Combo Pack Our convenient E-Z Duct Raceway Combo Pack includes two of each of the following raceway connector types...
View full details$17.24Sale -
$21.74
E-Z Duct Connector Combo Pack (For E-Z-75 Raceways), 2 each, white
E-Z 75 COM-WGRIDescription E-Z Duct Connector Combo Pack Our convenient E-Z Duct Raceway Combo Pack includes two of each of the following raceway connector types...
View full details$21.74Sale -
from $18.08
E-Z Duct Junction Box (For EZ-75), W -5" x H -5" x D -2", White
E-Z 75 DG-BGRIDescription E-Z Duct Junction Box (For EZ-75), W -5" x H -5" x D -2", White Wire & Cabling Raceway Junction Box For Low Voltage Applications E...
View full detailsfrom $18.08Sale -
from $10.74
E-Z Duct Junction Box - 3.50in x 5.20in x 2in
E-Z 58 SG-BGRIThese products are all Made to Order Which means they are non-cancelable and non-refundable Description E-Z Duct Junction Box For EZ-58 - 3.5...
View full detailsfrom $10.74Sale -
$21.74
E-Z Duct Raceway and Connectors, Combo Pack (For E-Z 75 Raceways)
E-Z 75 COM-WGRIThese products are all Made to Order Which means they are non-cancelable and non-refundable Description E-Z Duct Raceway and Connectors, Comb...
View full details$21.74Sale -
$10.62
E-Z Duct Raceway and Connectors, Splices (For E-Z 75 Raceways)
E-Z 75 SP-WGRIThese products are all Made to Order Which means they are non-cancelable and non-refundable Description E-Z Duct Raceway and Connectors, Spli...
View full details$10.62Sale -
$15.86
E-Z Duct Raceway and Connectors, Tee (For E-Z 75 Raceways)
E-Z 75 TEE-WGRIThese products are all Made to Order Which means they are non-cancelable and non-refundable Description E-Z Duct Raceway and Connectors, Tee ...
View full details$15.86Sale -
$11.74
E-Z Duct Smoke Box (Fits Both: EZ-58 And EZ-75), 5.50" Diameter, White
E-Z SB-WGRIDescription E-Z Duct Smoke Box (Fits Both: EZ-58 And EZ-75), 5.50" Diameter, White Wire & Cabling Raceway Smoke Box For Low Voltage Applicatio...
View full details$11.74Sale -
$10.62
E-Z Duct Splice/Coupling Connector (For E-Z-QR Raceways), White - Bag Of 6
E-Z QR SP-WGRIDescription E-Z Duct Splice/Coupling (White) - Bag Of 6 Wire & Cabling Raceway Connectors For Low Voltage Applications The E-Z DUCT is a new p...
View full details$10.62Sale -
from $13.25
Easy-Splice ALCU, CU and UF Splice Kits
NPNB-SKAB-0Primus CableThese products are all Made to Order Which means they are non-cancelable and non-refundable Description Easy Splice™ Direct Burial/Submersible...
View full detailsfrom $13.25Sale -
$14.00
Flanged Lacing Bar
RP-K12-3324-FLCB1Kendall HowardDescription Flanged Lacing Bar Our Flanged Lacing Bars provide protection to your cables, making them easier to manage. The size and versatility o...
View full details$14.00Sale -
from $20.00
Flat Cable Lacing Panel, 1U, 2U
RP-K12-1011-1UKendall HowardCables and other accessories not included. Description Flat Cable Lacing Panel The Flat Cable Lacing Panels are a great choice for managing and r...
View full detailsfrom $20.00Sale -
from $5.00
Floor Mount Bracket - Wire Basket Floor/Cabinet Mounting
NPNB-VBT-FB050-BPPrimus CableDescription Floor Mount Bracket This bracket provides 2.5” of clearance above the floor or top of a cabinet Features Features For use with 2", 4...
View full detailsfrom $5.00Sale -
from $7.25
Hammer-On J-Hook
JH1-6685-12HPrimus CableDescription 2" Hammer-On J-Hook for 1/8" - 1/4" Flange Our 2" Hammer-On J-Hook will support up to 50lbs and is easily attached by using only a h...
View full detailsfrom $7.25Sale -
$13.00
Hose Bracket - Fiber Cable Tray Drops
CM-T4-4755-U4Primus CableDescription Hose Bracket Hose Brackets secure the Flexible Hose to the Spill Over in a vertical drop from an overhead fiber tray run to a cabinet o...
View full details$13.00Sale -
from $9.00
L Bracket - Wire Basket Wall Mounting
NPNB-VBT-WL100-BPPrimus CableDescription L Bracket L Brackets provide a secure method for mounting basket tray to a wall while helping to maintain a consistent distance betwe...
View full detailsfrom $9.00Sale