Skip to content
#1 Source in low voltage wire and cable. Call us today to learn more about special offers.

Helping you get Wire from Point A to Point B - WIRE INSTALLATION TOOLS & SPECIALTY DRILL BITS


Tools & Accessories
Drill Bits & Augers
Cable Fishing Rods


Taihn Fiberoptics-Pushable Cable

Replacement Flexible Leader for Wire Python

This is a replacement flexible leader for the Wire Python wire pulling and retrieval system. Use this leader with the magnet bullet (MAG-301) on the end and keep on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FXS-MF   Replacement Flexible Leader for Wire Python

5/16" Fibersnake Flexible Leader

The 5/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBL204   Replacement Flexible Leader for Wire Python

Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

The 1/4" & 3/16" Fibersnake Flexible Leader is used to navigate 90 degree bends and small gaps in conduit. It also works well with corrugated conduit.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBT204   Fibersnake Flexible Leader, for 1/4" and 3/16" Fibersnakes

Pro Set 36 Kit

- 5/32" Glow, 1/4" Yellow & 3/16" Orange Rods
- All parts are interchangeable for a total of 36' in length
- Also includes Flex Fish magnet with all attachments
- Kit comes packaged in a handy clear carrying case with vinyl caps
- Made in the USA
- One Year Warranty on Manufacturers Defects

  BES Part #   Primus Cable Part #   Top Seller   Description
  PS36 Kit   Pro Set 36 Kit

3" Mega-Magnetic Bit Holder 1/4" hex shank

The Mega-Magnetic bit holder is compatible to hold most common bits. The strong magnet helps keep all your bits intact during use keeping them from falling and getting misplaced. This item is portable and will fit nicely into a tool bag taking up only a minimal amount of space.

  BES Part #   Primus Cable Part #   Top Seller   Description
  MB314   3" Mega-Magnetic Bit Holder  1/4" hex shank

Cable Cart

- Heavy duty steel with durable powder-coated finish
- Vertical rack pulls out for easy loading / unloading of spools
- 3/4" axles accommodate a wide assortment of reel sizes
- Front stanchions come with both 3/4" and 1" axles to provide more versatility
- Add plywood and the Cable Cart becomes a mobile workbench
- Room for your ladder, toolbox and other supplies
- Durable locking casters are rated up to 1000 lbs
- Combine it with our Fiberfish Rodder and you have all the tools you need to pull wire through conduit
- Made in the USA
- One Year Warranty on Manufacturers Defects.

  BES Part #   Primus Cable Part #   Top Seller   Description
  CC2000   Cable Cart

Cable Caddy, 43" x 16", 7" Wheels, Heavy Duty

The 43" x 16" Heavy Duty Cable Caddy can carry multiple spools of wire or cable on its 1/2" solid steel axles. This unit is portable with its 7" rubber wheels and has six axle positions for unlimited versatility. It carries spools up to 16" wide. The 43" x 16" Heavy Duty Cable Caddy carries over 250 pounds of wire or cable.

  BES Part #   Primus Cable Part #   Top Seller   Description
  CC1200   Cable Caddy, 43" x 16", 7" Wheels

Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy with Wheels

The Cable Dolly has four 12" wide spindles and an eight axle system. It can carry multiple spools of wire or cable and durable locking casters for mobility. This cable dolly is made of heavy duty steel and has a powder coated finish.

  BES Part #   Primus Cable Part #   Top Seller   Description
  CD3000   Cable Dolly, 8 Axle Heavy Duty Wire Cart Caddy

Stud Mounted Cable Caddy

The Stud Cable/Wire Caddy is a portable cable and wire installation solution that will help facilitate your cable run. It hangs on an exposed stud and supports several spools of wire or cable at a time. This cable caddy is compact and portable. It is manufactured of heavy duty steel with a durable powder coat finish.

  BES Part #   Primus Cable Part #   Top Seller   Description
  WH24   Stud Mounted Cable Caddy

43" Portable Hand Truck, 7" Wheels

The 43" Portable Hand Truck is constructed with 1" steel tubing with a durable powder coat finish. It can accommodate spools up to 16" wide on its four solid steel 1/2" axles. It also has 7" rubber wheels for easy mobility.

  BES Part #   Primus Cable Part #   Top Seller   Description
  CT1100   43" Portable Hand Truck, 7" Wheels

Cable Carrier, Heavy Duty Portable Reel Holder

The Portable Heavy Duty Cable Reel Holder simplifies the installation of bulk wire and cable. Pull cable safely and conveniently from the sturdy, lightweight frame of this cable reel holder. Manufactured of heavy duty steel, this cable reel holder has a durable powder coated finish. The 26" wide crossbar will accommodate up to 250 pounds of cable on multiple spools.

  BES Part #   Primus Cable Part #   Top Seller   Description
  CR1248   Cable Carrier, Heavy Duty Portable Reel Holder

Rack-A-Tiers - 2 Piece Rack System

The Rack-A-Tiers two piece work system is the ultimate heavy duty work shop system. It serves as a wire puller, sawhorse, vice, work bench, and stool. The Rack-A-Tiers is made of heavy duty plastic and nests together for convenient storage when not in use.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BES11455   Rack-A-Tiers - 2 Piece Rack System

Replacement Leader Magnet for Wire Python

This is a replacement leader magnet for the Wire Python wire pulling and retrieval system. Use this leader magnet on the inside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

  BES Part #   Primus Cable Part #   Top Seller   Description
  MAG-301   Replacement Leader Magnet for Wire Python

Replacement Wire Python Paddle

This is a replacement paddle for the Wire Python wire pulling and retrieval system. Use this magnetic paddle on the outside of a wall to retrieve tools or drill bits stuck inside. This tool works great on insulated walls.

  BES Part #   Primus Cable Part #   Top Seller   Description
  MF201   Replacement Wire Python Paddle

Wire Bits, Feeler/Locator for Wall Cavities, 10 Pack

Feeler/Locator Wire Bits are used to identify specific wall cavities. It is ideal for mapping out speakers in a ceiling. These leave a tiny hole which is almost unnoticeable. Wire bits can be cut down to appropriate length.

  BES Part #   Primus Cable Part #   Top Seller   Description
  WB36047   Wire Bits, 10 Pack, .047" x 36"
  WB36062
  Wire Bits, 10 Pack, .062" x 36"
  WB36072
  Wire Bits, 10 Pack, .072" x 36"

Drywall Protector Plate, Single & Dual Gang

The Drywall Protector Plate temporarily locks on and protects the work hole and surrounding area from costly paint and drywall damage. It is compatible with both single and dual gang boxes. These handy drywall plates will save you hours of costly repair time.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB-PP   Drywall Protector Plate, Single & Dual Gang

Super High Intensity LED Headlight with Zoom Three-Way Switch

This Super High Intensity LED Headlight has a three way (high, low, flash) switch and adjustable head strap. The hinged mount allows you to adjust the LED to aim it as necessary. It is made of durable ABS and aluminum, and runs on three AA batteries.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BES-HL452   Super High Intensity LED Headlight with Zoom Three-Way Switch

Flexible Folding Shaft Drill Bit Steering Guide Tool

The Flexible Shaft Drill Bit Steering Guide Tool provides added control over drill bits. It folds for easy storage and portability.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB-GUD   Flexible Folding Shaft Drill Bit Steering Guide Tool

5/16" Fibersnake Bullnose Replacement Tip, Brass

The 5/16" Fibersnake Bullnose Replacement Brass Tip fits the 5/16" Fibersnake Rodder.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBL101   5/16" Fibersnake Bullnose Replacement Tip, Brass

1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

The 1/4" & 3/16™ Fibersnake Swivel Coupling, Joiner Section is used to connect multiple Fibersnake Rodders.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBT202   1/4" & 3/16" Fibersnake Swivel Coupling, Joiner Section

5/16" Fibersnake Swivel Coupling, Joiner Section

The 5/16" Fibersnake Swivel Coupling, Joiner Section is used to connect multiple 5/16" Fibersnake Rodders.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBL202   5/16" Fibersnake Swivel Coupling, Joiner Section

5/16" Fibersnake Roller Guide

The 5/16" Fibersnake Roller Guide is used to navigate 90 degree bends and small gaps in conduit utilizing the FIbersnake Rodder. This works excellent in corrugated conduit.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBL203   5/16" Fibersnake Roller Guide

10' or 25' Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel

The Undercarpet Snake is made of annealed stainless steel and is used to run wire underneath carpet. It easily stores in a convenient PVC case and can be pulled from either direction.

  BES Part #   Primus Cable Part #   Top Seller   Description
  UC10   Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel, 10'
  UC25  Undercarpet Snake (In PVC Case), Flat Annealed Stainless Steel, 25'

10' or 25' Fish Wire, Carbon Steel, PVC Case

The 10' Fish Wire is an economical and convenient solution for short distance wire pulling. It is made of carbon steel fish wire and stores in a convenient PVC case. It can be pulled from either direction.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FW10   Fish Wire, Carbon Steel, PVC Case 10'
  FW25   Fish Wire, Carbon Steel, PVC Case 25'

Replacement Z-Tip For Telescoping Poles - Z Hook

This Z-Tip for telescoping poles helps pull wires over long distances in hard to reach places. It allows installers to run wire and cable from a safe distance around suspended ceilings, crawl spaces, and attics. This tools works great in factories and warehouses with high ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  TP620Z   Replacement Z-Tip For Telescoping Poles - Z Hook

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Fish Hook

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, Bullnose Tip, Ball Chain, Screw Tip, and Pull Ring for BES wire fishing rods.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB565   3/16' & 5/32" Fiberfish/Glowfish Replacement Tip

10" Ball Chain for Wire Fishing Tools

Use the 10 foot chain to fish wires in uninsulated walls. This is quite the versatile and easy to use tool paired with a Fish Hook or BES wire fishing tool.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BC-120   10" Ball Chain for Wire Fishing Tools

1/4" Fiberfish Replacement Tip, Screw Tip

The 1/4" Fiberfish Replacement Head Screw Tip fits our wire fishing rods from BES like the Fiberfish. It has a screw style machined steel tip.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB125   1/4" Fiberfish Replacement Tip, Screw Tip

3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

The Fiberfish Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish. It includes Wisp Head, Fish Hook, and replacement Bullnose Tips for BES wire fishing rods.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB560   3/16" & 5/32" Fiberfish/Glowfish Rods Starter Attachment Kit

Fiberfish/Glowfish Replacement Tip, LED Light

The LED Light Fiberfish Replacement Tip fits all wire fishing rods from BES. This replacement tip is outfitted with a high intensity LED light making it easier to work with in dark attics, basements, and crawl spaces.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB555   Fiberfish/Glowfish Replacement Tip, LED Light

3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

This Pull Ring Replacement Tip fits 3/16" and 5/32" wire fishing rods from BES like the Fiberfish and Glowfish. It has a pull ring style machined steel tip.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB518   3/16" & 5/32" Fiberfish/Glowfish Replacement Tip, Pull Ring

Professional Level and Template

This Professional Level and Template help the installers to mark precise holes in paneling and drywall. It will work with single or two gang boxes.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB-LTT Professional Level and Template

Flex Magnet Light

This push button on/off High Intensity White LED tip includes a power full 5 pound magnet and a 23" Flexible shaft that is capable of bending into any position desired.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB-ML Flex Magnet Light

Carbide Screw Drill, Wire Pulling Drill Bit

- High quality carbide bit welded to a hardened steel shaft Carbide bit for concrete and stone
- Wide flutes for quick debris removal
- Induction hardened body provides extra strength
- Not intended for use on Wood or Metal
- Beveled shanks for improved grip in all drill chucks
- A Quicker and Easier way to drill holes and pull wire through walls
- Screw Tip grabs onto the inside of the wire jacket - no need for tape or stripping wires
- Screw Drill pulls the wire through a smaller hole
- Works on Interior or exterior walls
- One Year Warranty on Manufacturers Defects
  BES Part #   Primus Cable Part #   Top Seller   Description
  SCDC3812   3/8" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 12"
  SCDC3818   3/8" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 18"
  SCDC3824   3/8" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 24"
  SCDC3836   3/8" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 36"
  SCDC3848   3/8" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 48"
  SCDC1212
  1/2" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 12"
  SCDC1218
  1/2" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 18"
  SCDC1224
  1/2" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 24"
  SCDC1236
  1/2" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 36"
  SCDC1248
  1/2" Diameter Carbide Screw Drill, Wire Pulling Drill Bit 48"

3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3

High Speed Steel (HSS) Flex Drill Bits have a fast spiral flute design for improved debris removal and reduced drag. These bits are manufactured of premium M2 grade steel for sustained sharpness. Two piece construction lends this bit increased hardness with a more flexible shaft. These HSS flex bits cut through wood, steel, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX3812PK3   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 12"
  FLX3818PK3   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 18"
  FLX3824PK3   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 24"
  FLX3836PK3   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 36"

1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3

 

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX1418PK3   1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 18"
  FLX1424PK3   1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes, Package of 3, 24"

High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole

The High Speed Steel (HSS) Flex Drill Bit features a crossbore hole at the end of the bit for wire pulling. Aggressive 118 degree cutting tips drill fast clean holes. Fast spiral flutes improve debris removal and reduce drag. Premium quality M2 grade steel stays sharp longer.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX3812H   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 12"
  FLX3818H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 18"
  FLX3824H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 24"
  FLX3836H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 36"
  FLX3848H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 48"
  FLX3854H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 54"
  FLX3872H
  3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 72" 
  FLX1412H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 12"
  FLX1418H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 18"
  FLX1424H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 24"
  FLX1436H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 36"
  FLX1448H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 48"
  FLX1454H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 54"
  FLX1472H
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole 72"

High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes

The High Speed Steel Flex Drill Bit features aggressive 118 degree cutting for fast, clean holes. Fast spiral flutes improve debris removal and reduce drag. Premium M2 grade steel stays sharp longer. Two piece construction allows for a harder bit and a more flexible shaft. Beveled shanks for improved grip in all drill chucks to cut through wood, metal, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX3812   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 12"
  FLX3818   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 18"
  FLX3824   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 24"
  FLX3836   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 36"
  FLX3848   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 48"
  FLX3854   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 54"
  FLX3872   3/8" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 72" 
  FLX1412
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 12"
  FLX1418
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 18"
  FLX1424
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 24"
  FLX1436
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 36"
  FLX1448
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 48"
  FLX1454
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 54"
  FLX1472
  1/4" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes 72"

Screw Drill, Wire Pulling Drill Bit

- A Quicker and Easier way to drill holes and pull wire through walls
- Screw Tip grabs onto the inside of wire jacket - no need for tape or stripping wire
- Screw Drill pulls the wire through a smaller hole
- Works on interior or exterior walls
- Available with HSS or Carbide Drill Bit with Screw Tip on the other end
- Made in the USA
- One Year Warranty on Manufacturing Defect
  BES Part #   Primus Cable Part #   Top Seller   Description
  SCD3812   3/8" Diameter Screw Drill, Wire Pulling Drill Bit 12"
  SCD3818   3/8" Diameter Screw Drill, Wire Pulling Drill Bit 18"
  SCD3824   3/8" Diameter Screw Drill, Wire Pulling Drill Bit 24"
  SCD3836   3/8" Diameter Screw Drill, Wire Pulling Drill Bit 36"
  SCD3848   3/8" Diameter Screw Drill, Wire Pulling Drill Bit 48"
  SCD1212
  1/2" Diameter Screw Drill, Wire Pulling Drill Bit 12"
  SCD1218
  1/2" Diameter Screw Drill, Wire Pulling Drill Bit 18"
  SCD1224
  1/2" Diameter Screw Drill, Wire Pulling Drill Bit 24"
  SCD1236
  1/2" Diameter Screw Drill, Wire Pulling Drill Bit 36"
  SCD1248
  1/2" Diameter Screw Drill, Wire Pulling Drill Bit 48"

Heavy Duty Bell Hanger's 3/8" Diameter Bit with Hole

- Heavy Duty Shaft with a crossbore hole at the end of the bit for wire pulling
- Aggressive 118 degree cutting tip drills fast, clean holes
- Fast spiral flutes improve debris removal and reduce drag
- Premium M2 grade steel stays sharp longer
- Cuts through Wood, Metal, Nails and Screws
- Solid shaft for stable drilling
- Beveled shanks for improved grip in all drill chucks
- Made in the USA
- One Year Warranty on Manufacturers Defects

  BES Part #   Primus Cable Part #   Top Seller   Description
  AD3812H   Heavy Duty Bell Hanger's 3/8" Diameter Bit with Hole 12"
  AD3824H   Heavy Duty Bell Hanger's 3/8" Diameter Bit with Hole 24"
  AD3836H   Heavy Duty Bell Hanger's 3/8" Diameter Bit with Hole 36"
  AD3848H   Heavy Duty Bell Hanger's 3/8" Diameter Bit with Hole 48"

Carbide Flex Drill Bit

The Carbide Flex Drill Bit consists of a high quality carbide bit welded to a flexible steel shaft for use on stone and masonry. Aggressive 118 degree cutting tip drills fast clean holes. Cross-bored hole through end of bit facilitates wire pulling. Wide flutes allow for quick debris removal.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLM1448   1/4" Diameter Carbide Flex Drill Bit 48"
  FLM1454   1/4" Diameter Carbide Flex Drill Bit 54"
  FLM1472   1/4" Diameter Carbide Flex Drill Bit 72"
  FLM3848
  3/8" Diameter Carbide Flex Drill Bit 48"
  FLM3854
  3/8" Diameter Carbide Flex Drill Bit 54"
  FLM3872
  3/8" Diameter Carbide Flex Drill Bit 72"
  FLM1248
  1/2" Diameter Carbide Flex Drill Bit 48"
  FLM1254
  1/2" Diameter Carbide Flex Drill Bit 54"
  FLM1272
  1/2" Diameter Carbide Flex Drill Bit 72"

Quattro Auger Flex Drill Bits With Four Cutting Edges & A Screw Tip

The Quattro Auger Flex Drill Bit drills smooth clean holes in wood quickly with four cutting edges. Large flutes insure easy and thorough removal of debris. Screw tip at the head pulls the bit aggressively through wood and makes drilling an effortless task. Beveled shanks for improved grip in all drill chucks. Crafted from high quality steel.

  BES Part #   Primus Cable Part #   Top Seller   Description
  QTT3806   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1206   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91606   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3406   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT106   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11406   6" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3812   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1212   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91612   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3412   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT112   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11412   12" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3818
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1218
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91618
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3418
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT118
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11418
  18" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3824
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1224
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91624
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3424
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT124
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11424
  24" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3836   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1236   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91636   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3436   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT136   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11436   36" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3848   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1248   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91648   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3448   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT148   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11448   48" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3854   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1254   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91654   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3454   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT154   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11454   54" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"
  QTT3872
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/8"
  QTT1272
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1/2"
  QTT91672
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 9/16"
  QTT3472
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 3/4"
  QTT172
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1"
  QTT11472
  72" Quattro Auger Flex Drill Bit With Four Cutting Edges & A Screw Tip 1 1/4"

Bi-Metal Hole Saw Arbor, 1/2" Chuck, Hex Shank 7/16", For 9/16" - 1 3/16" Dia. Hole Saws

The Bi-Metal Hole Saw Arbor fits hole saws ranging from 9/16" to 1 1/4" in diameter. It has a 7/16" hex shank and a 1/2" chuck.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BHS14A   Bi-Metal Hole Saw Arbor, 9/16" (14mm) to 1-1/4" (32mm)
  BHS716A   Bi-Metal Hole Saw Arbor, 1-1/2" (38mm) to 2-1/2" (64mm)

Bi-Metal Hole Saws, High Speed Steel (M3), Cuts Though Multiple Materials

The Bi-Metal Hole Saw is made of high speed M3 steel for heavy duty cutting. It cuts through stainless steel, pipe, plywood, hard wood floors, plastics, and nails embedded in wood. These are available in various diameter sizes including 9/16", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", and 2 1/2".

  BES Part #   Primus Cable Part #   Top Seller   Description
  BHS916   Bi-Metal Hole Saws, High Speed Steel (M3), 9/16" (14mm)
  BHS34   Bi-Metal Hole Saws, High Speed Steel (M3), 3/4" (19mm)
  BHS1   Bi-Metal Hole Saws, High Speed Steel (M3), 1" (25mm)
  BHS114   Bi-Metal Hole Saws, High Speed Steel (M3), 1-1/4" (32mm)
  BHS112   Bi-Metal Hole Saws, High Speed Steel (M3), 1-1/2" (38mm)
  BHS134   Bi-Metal Hole Saws, High Speed Steel (M3), 1-3/4" (44mm)
  BHS2   Bi-Metal Hole Saws, High Speed Steel (M3), 2" (50mm)
  BHS214   Bi-Metal Hole Saws, High Speed Steel (M3), 2-1/4" (57mm)
  BHS212   Bi-Metal Hole Saws, High Speed Steel (M3), 2-1/2" (64mm)

Auger Drill Bits w/ Self Feed, 7" & 17" Lengths

These Self Feed Auger Drill Bits are aggressively designed for fast, clean drilling in wood. The hex shank eliminates slippage in chuck.

  BES Part #   Primus Cable Part #   Top Seller   Description
  SD38   Auger Drill Bits w/ Self Feed, 3/8" x 7"
  SD12
  Auger Drill Bits w/ Self Feed, 1/2" x 7"
  SD58
  Auger Drill Bits w/ Self Feed, 5/8" x 7"
  SD34
  Auger Drill Bits w/ Self Feed, 3/4" x 7"
  SD78
  Auger Drill Bits w/ Self Feed, 7/8" x 7"
  SD1
  Auger Drill Bits w/ Self Feed, 1" x 7"
  SDL38
  Auger Drill Bits w/ Self Feed, 3/8" x 17"
  SDL12
  Auger Drill Bits w/ Self Feed, 1/2" x 17"
  SDL58
  Auger Drill Bits w/ Self Feed, 5/8" x 17"
  SDL34   Auger Drill Bits w/ Self Feed, 3/4" x 17"
  SDL78   Auger Drill Bits w/ Self Feed, 7/8" x 17"
  SDL1   Auger Drill Bits w/ Self Feed, 1" x 17"

Bell Hanger Drill Bit Cuts Through Wood, Metal, Nails and Screws, Package of 3

These Bell Hanger Drill Bits measure 3/8" in diameter and are 24" in length. With aggressive 118 degree spiral flutes, they drill fast, clean holes. This design also improves debris removal and reduces drag. Premium M2 grade steel stays sharp longer, and solid shaft improves stability. The Bell Hanger Drill Bit cuts through wood, metal, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  NPNB-BELL3824PK3   Bell Hanger Drill Bit, Package of 3

Masonry Carbide Bell Hanger Drill Bit w/ Wire Pulling Hole for Stone & Concrete

The Masonry Carbide Bell Hanger Drill Bit has high quality carbide bit welded to a hardened steel shaft for concrete and masonry drilling. Wide flutes facilitate debris removal. Cross-bored hole through end of bit for wire pulling. Beveled shanks for improved grip in all drill chucks.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BELLC1412   Masonry Carbide Bell Hanger Drill Bit, 1/4" x 12"
  BELLC1418   Masonry Carbide Bell Hanger Drill Bit, 1/4" x 18"
  BELLC1424   Masonry Carbide Bell Hanger Drill Bit, 1/4" x 24"
  BELLC1436   Masonry Carbide Bell Hanger Drill Bit, 1/4" x 36"
  BELLC3812   Masonry Carbide Bell Hanger Drill Bit, 3/8" x 12"
  BELLC3818   Masonry Carbide Bell Hanger Drill Bit, 3/8" x 18"
  BELLC3824   Masonry Carbide Bell Hanger Drill Bit, 3/8" x 24"
  BELLC3836   Masonry Carbide Bell Hanger Drill Bit, 3/8" x 36"
  BELLC1212   Masonry Carbide Bell Hanger Drill Bit, 1/2" x 12"
  BELLC1218   Masonry Carbide Bell Hanger Drill Bit, 1/2" x 18"
  BELLC1224   Masonry Carbide Bell Hanger Drill Bit, 1/2" x 24"
  BELLC1236   Masonry Carbide Bell Hanger Drill Bit, 1/2" x 36"
  BELLC5812   Masonry Carbide Bell Hanger Drill Bit, 5/8" x 12"
  BELLC5818   Masonry Carbide Bell Hanger Drill Bit, 5/8" x 18"
  BELLC5824   Masonry Carbide Bell Hanger Drill Bit, 5/8" x 24"
  BELLC5836   Masonry Carbide Bell Hanger Drill Bit, 5/8" x 36"

Bell Hanger Drill Bit with Wire Pulling Hole, Cuts Through Wood, Metal, Nails and Screws

These Bell Hanger Drill Bits measure 1/4", 3/8", and 1/2" in diameter and are range in length from 12" to 36". With aggressive 118 degree spiral flutes, they drill fast, clean holes. This design also improves debris removal and reduces drag. Premium M2 grade steel stays sharp longer, and solid shaft improves stability. The Bell Hanger Drill Bit cuts through wood, metal, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BELL1412H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/4" x 12"
  BELL1418H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/4" x 18"
  BELL1424H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/4" x 24"
  BELL1436H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/4" x 36"
  BELL3812H   Bell Hanger Drill Bit with Wire Pulling Hole, 3/8" x 12"
  BELL3818H   Bell Hanger Drill Bit with Wire Pulling Hole, 3/8" x 18"
  BELL3824H   Bell Hanger Drill Bit with Wire Pulling Hole, 3/8" x 24"
  BELL3836H   Bell Hanger Drill Bit with Wire Pulling Hole, 3/8" x 36"
  BELL1212H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/2" x 12"
  BELL1218H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/2" x 18"
  BELL1224H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/2" x 24"
  BELL1236H   Bell Hanger Drill Bit with Wire Pulling Hole, 1/2" x 36"


Flexible Drill Bit Extension With Dual Set Screws

The Flexible Drill Bit Extension is a pliable alternative for drilling in hard to reach areas. These flexible drill extensions bend to arc over obstacles and reach out of the way places.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBEX24   Flexible Drill Bit Extension With Dual Set Screws, 3/16" x 24"
  FIBEX48   Flexible Drill Bit Extension With Dual Set Screws, 3/16" x 48"
  FIBEX54   Flexible Drill Bit Extension With Dual Set Screws, 3/16" x 54"
  FIBEX72   Flexible Drill Bit Extension With Dual Set Screws, 3/16" x 72"
  FIBEX1424   Flexible Drill Bit Extension With Dual Set Screws, 1/4" x 24"
  FIBEX1448   Flexible Drill Bit Extension With Dual Set Screws, 1/4" x 48"
  FIBEX1454   Flexible Drill Bit Extension With Dual Set Screws, 1/4" x 54"
  FIBEX1472   Flexible Drill Bit Extension With Dual Set Screws, 1/4" x 72"

1/2" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes & Wire Pulling Hole

The High Speed Steel (HSS) Flex Drill Bit features a crossbore hole at the end of the bit for wire pulling. Aggressive 118 degree cutting tips drill fast clean holes. Fast spiral flutes improve debris removal and reduce drag. Premium quality M2 grade steel stays sharp longer.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX1212H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 12"
  FLX1218H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 18"
  FLX1224H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 24"
  FLX1236H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 36"
  FLX1248H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 48'
  FLX1254H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 54'
  FLX1272H   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 72"

Spade Drill Bits With Through Hole

The Spade Drill Bits With Through Hole are an economical option for drilling fast holes for common applications like 2x4s and wood surfaces. Includes a through hole for wire pulling.

  BES Part #   Primus Cable Part #   Top Seller   Description
  NPNB-SP38   Spade Drill Bits With Through Hole, 3/8" x 6"
  NPNB-SP38-16   Spade Drill Bits With Through Hole, 3/8" x 16"
  NPNB-SP12   Spade Drill Bits With Through Hole, 1/2" x 6"
  SP34   Spade Drill Bits With Through Hole, 3/4" x 6"
  SP34-16   Spade Drill Bits With Through Hole, 3/4" x 16"
  NPNB-SP1   Spade Drill Bits With Through Hole, 1" x 6"

Aircraft HSS Drill Bits With Fast Spirals

The Aircraft High Speed Steel Drill Bits are Ideal for drilling in hard-to-reach areas and for running wire and cable. The are constructed of M2 High Speed Steel (HSS) for the best combination of strength, heat resistance and wear resistance. Commonly used for drilling through metal, wood, and plastic.

  BES Part #   Primus Cable Part #   Top Seller   Description
  NPNB-AC186   Aircraft HSS Drill Bits, 1/8" x 6"
  NPNB-AC1412   Aircraft HSS Drill Bits, 1/4" x 12"

Bell Hanger Drill Bit Cuts Through Wood, Metal, Nails and Screws

These Bell Hanger Drill Bits measure 1/4", 3/8", and 1/2" in diameter and are from 12" to 36" in length. With aggressive 118 degree spiral flutes, they drill fast, clean holes. This design also improves debris removal and reduces drag. Premium M2 grade steel stays sharp longer, and solid shaft improves stability. The Bell Hanger Drill Bit cuts through wood, metal, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  BELL1412   Bell Hanger Drill Bit, 1/4" x 12"
  BELL1418   Bell Hanger Drill Bit, 1/4" x 18"
  BELL1424   Bell Hanger Drill Bit, 1/4" x 24"
  BELL1436   Bell Hanger Drill Bit, 1/4" x 36"
  BELL3812   Bell Hanger Drill Bit, 3/8" x 12"
  BELL3818   Bell Hanger Drill Bit, 3/8" x 18"
  BELL3824   Bell Hanger Drill Bit, 3/8" x 24"
  BELL3836   Bell Hanger Drill Bit, 3/8" x 36"
  BELL1212   Bell Hanger Drill Bit, 1/2" x 12"
  BELL1218   Bell Hanger Drill Bit, 1/2" x 18"
  BELL1224   Bell Hanger Drill Bit, 1/2" x 24"
  BELL1236   Bell Hanger Drill Bit, 1/2" x 36"

1/2" Diameter High Speed Steel (HSS) Flex Drill Bit with Fast Spiral Flutes

The High Speed Steel Flex Drill Bit features aggressive 118 degree cutting for fast, clean holes. Fast spiral flutes improve debris removal and reduce drag. Premium M2 grade steel stays sharp longer. Two piece construction allows for a harder bit and a more flexible shaft. Beveled shanks for improved grip in all drill chucks to cut through wood, metal, nails, and screws.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FLX1212   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 12"
  FLX1218   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 18"
  FLX1224   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 24"
  FLX1236   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 36"
  FLX1248   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 48"
  FLX1254   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 54"
  FLX1272   1/2" Diameter High Speed Steel (HSS) Flex Drill Bit, 72"

High Speed Steel (HSS) Step Drill Bit - 9 Steps - From 1/4" to 3/4"

This High Speed Steel (HSS) Construction Step Drill Bit is titanium nitride coated for cooler running and used for drilling variable diameter round holes in metals, plastics & woods. It also includes a two flute design for smooth, fast cutting and de-burrs holes automatically as you drill. With the Hex Shank you will not have to worry about it spinning in the chuck. The Step Drill Bit has 9 steps ranging from the smallest size of 1/4" to the largest size of 3/4".

  BES Part #   Primus Cable Part #   Top Seller   Description
  STP1434   High Speed Steel (HSS) Step Drill Bit - 9 Steps

Masonry Carbide Drill Bit For Stone or Concrete

This Masonry Carbide Bit is for stone or concrete and not intended for use in wood or metal. It is available in 2 sizes 3/16" x 4" and 1/4" x 4-1/4".

  BES Part #   Primus Cable Part #   Top Seller   Description
  MDB316   Masonry Carbide Drill Bit, 3/16" x 4"
  MDB14   Masonry Carbide Drill Bit, 1/4" x 4-1/4"

High Performance Jobber High Speed Steel (HSS) Drill Bits - Pack of 6

This Pack of 6 Jobber Drill Bits are high performance "Jobber" drill bits that are suitable for all normal drilling in conventional materials and constructed of High Speed Steel (HSS). They range is size between 3/32" diameter x 2 1/4" long to 3/8" diameter to 5" long.

  BES Part #   Primus Cable Part #   Top Seller   Description
  NPNB-HSS332-6   High Performance Jobber High Speed Steel (HSS) Drill Bit, 3/32" x 2-1/4"
  NPNB-HSS18-6   High Performance Jobber High Speed Steel (HSS) Drill Bit, 1/8" x 2-3/4"
  NPNB-HSS316-6   High Performance Jobber High Speed Steel (HSS) Drill Bit, 3/16" x 3-1/2"
  NPNB-HSS38-6   High Performance Jobber High Speed Steel (HSS) Drill Bit, 3/8" x 5"

5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

This 5/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBL400   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'
  FIBL450   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 450'
  FIBL500   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 500'
  FIBL550   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 550'
  FIBL600   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 600'
  FIBL650   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 650'
  FIBL700   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 700'
  FIBL750   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 750'
  FIBL800   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 800'
  FIBL850   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 850'
  FIBL900   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 900'
  FIBL950   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 950'
  FIBL1000   5/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 1000'

5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'-1000' Length

The 5/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 400 feet to up to 1,000 feet. With its non-conductive coating, the Fibersnake Rodder is safe for working around electrical wiring and inside of conduit. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  RL400   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'
  RL450   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 450'
  RL500   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 500'
  RL550   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 550'
  RL600   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 600'
  RL650   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 650'
  RL700   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating,700'
  RL750   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 750'
  RL800   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 800'
  RL850   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 850'
  RL900   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 900'
  RL950   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 950'
  RL1000   5/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 1000'

1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'-600' Length

The 1/4" Fibersnake Rod for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 200 feet to up to 600 feet and has a 1/4" diameter. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBR200   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200'
  FIBR250   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 250'
  FIBR300   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 300'
  FIBR350   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 350'
  FIBR400   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 400'
  FIBR450   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 450'
  FIBR500   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 500'
  FIBR550   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 550'
  FIBR600   1/4" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 600'

1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'-600' Length

The 1/4" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 100 feet to up to 600 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  RR100
  1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100'
  RR150
  1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 150'
  RR200   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 200'
  RR250   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 250'
  RR300   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 300'
  RR350   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 350'
  RR400   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 400'
  RR450   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 450'
  RR500   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 500'
  RR550   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 550'
  RR600   1/4" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 600'

3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10'-300' Length

This 3/16" Fibersnake Rodder is jacketed with a plastic coating for superior durability and flexibility. It has rust proofed brass fittings and is non-conductive for working in conduit with existing wiring. The Fibersnake Rodder is intended for fish tape and rope pulling, not for pulling wire and cable.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIBT10   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 10ft
  FIBT25   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 25ft
  FIBT40   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 40ft
  FIBT50   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 50ft
  FIBT100   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 100ft
  FIBT150   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 150ft
  FIBT200   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 200ft
  FIBT250   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 250ft
  FIBT300   3/16" Fibersnake Rod, Fiberglass Core w/ Plastic Coating, 300ft

3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50'-300' Length

The 3/16" Replacement Fibersnake Rodder is for the BES Fibersnake and has a reinforced fiberglass core jacketed with plastic coating. This lends it excellent durability and flexibility. It ranges in length from 50 feet to up to 300 feet. It is non-conductive, making it safe for working inside conduit around electrical wiring. The Fibersnake Replacement Rodder has rust-proof brass tips and fittings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  RT50   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 50ft
  RT100   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 100ft
  RT150   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 150ft
  RT200   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 200ft
  RT250   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 250ft
  RT300   3/16" Fibersnake Replacement Rodder, Fiberglass Core w/ Plastic Coating, 300ft

1/4” Home Pro Line, Wire Fishing Rod Kit – 4’ (12’ Total)

The Home Pro Line Wire Fishing Rod Kit includes 12 total feet of heavy duty rods for tough pulls. They are built to last, with zinc plating and rustproofing. The ends are made of machined steel. These wire fishing rods are stiff enough for drop ceilings and flexible enough for working with insulated walls.

  BES Part #   Primus Cable Part #   Top Seller   Description
  HPL100   1/4" Home Pro Line, Wire Fishing Rod Kit - 4' (12' Total)

3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

The versatile, non-conductive Fiberfish II is perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB203 3/16" Fiberfish II Wire Fishing Rod, 6' Length, Bullnose Ends

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB206   3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Bullnose/Female

3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB207   3/16" Fiberfish II Wire Fishing Rod Kit, 6' Rods (30' Total)

3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. Kit comes packaged in a handy, clear carrying case with vinyl caps.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB208 3/16" Fiberfish II Wire Fishing Rod Kit, 3' Rods (24' Total)

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB214 3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Bullnose/Female

3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB215   3/16" Fiberfish II Replacement Wire Fishing Rod, 3' Male/Female

3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB210   3/16" Fiberfish II Replacement Wire Fishing Rod, 6' Male/Female

3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

The most versatile of the Fiberfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. Fiberfish rods have a durable plastic coating that offers great performance with out the risk of splintering or slivering of the fiberglass.

  BES Part #   Primus Cable Part #   Top Seller   Description
  PCF207 3/16" Fiberfish II Kit, Plastic Coated Rods - 6' (30' Total Length)

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

  BES Part #   Primus Cable Part #   Top Seller   Description
  GLF315   3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Male/Female

3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges. The Glowfish luminous installation rod is durable with zinc plating and rustproof, with machined steel end fittings. It is flexible enough for working inside insulated walls yet stiff enough.

  BES Part #   Primus Cable Part #   Top Seller   Description
  GLF303   3/16" Glowfish, Glow-in-the-Dark Replacement Rod - 6' Bullnose/Bullnose

3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

The most versatile of the Glowfish with the new plastic coating process. Perfect for a wide range of installation situations and challenges.

  BES Part #   Primus Cable Part #   Top Seller   Description
  GLF314   3/16" Glowfish, Glow-in-the-Dark Replacement Rod " 3" Bullnose/Female

1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB104   1/4" Fiberfish Wire Fishing Rod Kit, 3' Male/Female, Female/Female, Bullnose Tips (6' Total)

24" Flex-Fish Flexible Wire Fishing Tool

Use the magnetic retriever to fish wires in uninsulated walls. One end has a permanently attached magnet, the other end has a female fitting which will accept the magnet head, Pull Ring, Fish Hook, Screw Tip, Ball Chain, Wisp Head, and Directional Tool attachments.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB221   24" Flex-Fish Flexible Wire Fishing Tool

3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. This kit comes packaged in a handy vinyl pouch.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB230 3/16" Fiberfish "FourPack" Wire Fishing Rods, 3" (12" Total)

1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

The most versatile of the Fiberfish with the new plastic coating process. These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB148   1/4" Fiberfish Wire Fishing Rod Cable Tray Kit, 6" (48" Total)

1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)

These are non-conductive fiberglass rods made in sections which can be screwed together for longer reach. Perfect for a wide range of installation situations and challenges. It is flexible enough for working inside insulated walls yet stiff enough for drop ceilings. The kits come packaged in a handy clear carry case with vinyl caps.

  BES Part #   Primus Cable Part #   Top Seller   Description
  FIB107   1/4" Fiberfish Wire Fishing Rod Kit, 6' Rods (24' Total)


Have Questions about BES or would like to place an order?

If you have further questions about any BES products or would like to place and order with us please leave us a message using the form below. Someone from our team will respond to your message as soon as possible. We look forward to fulfilling your requests.

Back to the top Submit quote!