#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Networking Cable Management

Security Wire Management

An effective cable management system keeps your CCTV security cable organized, which helps make system maintenance easier. Primus Cable carries a wide assortment of wire management solutions from cable runway ladder racks and wire cable trays, to hanging hardware solutions. Our wire management solutions help organize and protect your security cabling by keeping it off the floor.

Cable ladder racks route cables along cable runways along ceilings, walls, and floors. They provide superior strength and support with less weight. This wire management solution is highly adaptable, adjusting to any room layout.

A popular wire management product Primus Cable offers is the 12' Xtender Pole™, Telescoping Extension Pole. It allows professional contractors to safely install ceiling hardware from the ground level. This cable management tool allows contractors to install j-hooks safely from the ground level without having to use a ladder or lift. It has an adapter system for installing different types of cord management hardware including: eye lag screws, ceiling wire, j-hooks, and jack chains.

Wire Cable Trays provide a supported bridge pathway for cable to travel across open areas. They are more dynamic than conduit systems, and are highly stable for installation in risers and plenums. Other hanging wire management options include j-hooks which can be ceiling or wall mounted. Our commercial grade j hooks have carrying capacities anywhere from 17 to up to 50 pounds.

A popular cable management item is the multi-purpose J-Hook, Standard Steel - 3/4" - 4". These steel J-Hooks are available in sizes ranging from size 12 to up to size 64. The ¾” J-hook supports up to a dozen pound weight capacity, while the 4” J-hook handles up to 50 pounds. It is an ideal solution for stress free cable support for above suspended ceilings, and below raised floors. It’s also great for the home garage and workshop. We have standard steel J-Hooks available in ¾”, 1 5/16”, 2”, and 4” sizes.

Other hanging cable management solutions we offer include: drive rings, angle clips, beam flange clips, pressed beam clamps, and rod couplers. These cable management options are great for low voltage communications cable. Heat shrink tubing can also be molded to just about any cable, protecting it from the environment.

If you have any questions, feel free to give us a call. 951-824-1571



Products 1-48 of 224
Show
Heat Shrink Tubing, Adhesive Lined, 3:1 Shrink Ratio, 4"L, .375"Dia, 10 Pack

Price: $8.45-$9.45
View
Availability: In Stock
Primus Cable Item #: HS-Tubing -

    Heat Shrink Tubing Primus Cable's Heat Shrink Tubing offers environmental protection for electronic components, wire bundles, wire splices, and harness breakouts. This product is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. When heated in excess of 121 deg C (250 deg F), the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Product Quality The adhesive forms a flexible bond with a wide...

    16" Plastic Adjustable Sno-Shoe with Aerial Mounting Bracket & Hardware

    Price: $117.99
    View
    Availability: Min. Qty. Order
    Primus Cable Item #: FB26-4617-16A -

      Plastic Adjustable Sno-Shoe 16" Primus Cable's Plastic Adjustable Sno-Shoes (Also known as SnowShoe) are used to store slack fiber cable effectively and efficiently. Using a sno-shoe for your cable run is a great precautionary choice and is cheaper than having to buy additional cable when emergency repairs, growth and expansion, splicing and general maintenance occurs. A Snoe-Shoe will adhere to the bend radius of the cable, offering a more convenient method of storing extra cable when...

      24" Plastic Adjustable Sno-Shoe with Aerial Mounting Bracket & Hardware

      Price: $222.99
      View
      Availability: Min. Qty. Order
      Primus Cable Item #: FB26-4421-24A -

        Plastic Adjustable Sno-Shoe 24" Primus Cable's Plastic Adjustable Sno-Shoes (Also known as SnowShoe) are used to store slack fiber cable effectively and efficiently. Using a sno-shoe for your cable run is a great precautionary choice and is cheaper than having to buy additional cable when emergency repairs, growth and expansion, splicing and general maintenance occurs. A Snoe-Shoe will adhere to the bend radius of the cable, offering a more convenient method of storing extra cable when...

        16" Plastic Sno-Shoe with Arial Mounting Bracket & Hardware

        Price: $81.99-$91.99
        View
        Availability: In Stock
        Primus Cable Item #: NPNB-712##K-16 -

          Plastic Adjustable Sno-Shoe 16" Primus Cable's Plastic Adjustable Sno-Shoes (Also known as SnowShoe) are used to store slack fiber cable effectively and efficiently. Using a sno-shoe for your cable run is a great precautionary choice and is cheaper than having to buy additional cable when emergency repairs, growth and expansion, splicing and general maintenance occurs. A Snoe-Shoe will adhere to the bend radius of the cable, offering a more convenient method of storing extra cable when...

          21" Plastic Sno-Shoe with Arial Mounting Bracket & Hardware

          Price: $77.99-$108.99
          View
          Availability: In Stock
          Primus Cable Item #: FB26-2606-21T -

            Plastic Adjustable Sno-Shoe 21" Primus Cable's Plastic Adjustable Sno-Shoes (Also known as SnowShoe) are used to store slack fiber cable effectively and efficiently. Using a sno-shoe for your cable run is a great precautionary choice and is cheaper than having to buy additional cable when emergency repairs, growth and expansion, splicing and general maintenance occurs. A Snoe-Shoe will adhere to the bend radius of the cable, offering a more convenient method of storing extra cable when...

            White Pre-Adhesive Backed Latch Duct Raceway, 6 Feet Long
            Spotlight!

            Price: $7.02-$16.38
            View
            Availability: In Stock
            Primus Cable Item #: RWD-####-W -

              Adhesive Back Raceway Latch Duct Primus Cable's Latch Duct Interior Plastic Raceway System is a 1 piece design that hinges open for installation access. The molding can be used to route and protect cabling for low voltage data, voice, video, and fiber optic applications. Fittings are available for routing direction changes, extending, and terminating the molding. All bases incorporate a 1” minimum bend radius as recommended for fiber optic cables. The molding is manufactured using a special...

              10" Plastic Sno-Shoe with Arial Mounting Tap Bracket & Hardware

              Price: $76.99-$82.99
              View
              Availability: Min. Qty. Order
              Primus Cable Item #: NPNB-712##K-10 -

                Fiber Sno-Shoe Slack Storage Unit, 10" Two Pack Primus Cable's Fiber Sno-Shoe Slack Storage Unit (Also known as SnowShoe) are used to store slack fiber cable effectively and efficiently. Using a sno-shoe for your cable run is a great precautionary choice and is cheaper than having to buy additional cable when emergency repairs, growth and expansion, splicing and general maintenance occurs. A Snoe-Shoe will adhere to the bend radius of the cable, offering a more convenient method of storing...

                12 Xtender Pole™, Telescoping Extension Pole

                Price: $224.50
                View
                Availability: In Stock
                Primus Cable Item #: JH-4480-12 -

                  multi-purpose telescoping Xtender Pole™ 12ft. Primus Cable's Xtender Pole™ is perfect for contractors and low-voltage cable installers that would like to work from the floor when installing overhead hanging hardware solutions. This product provides a safer way to reach areas that previously were too dangerous or inaccessible by ladders, scaffolding, and scissorlifts including vauled ceilings, over stairwells, and through a ceiling grid. This multi-purpose telescoping pole has interchangeable...

                  E-Bend Cable Ladder Rack, 90 Degree

                  Price: $147.60-$159.62
                  View
                  Availability: In Stock
                  Primus Cable Item #: LR-D17-####-L90 -

                    90 Degree E-Bend Cable Ladder Rack Primus Cable's 90 Degree E-Bend Cable Ladder Rack allows cables to change direction by 90 degrees while maintaining a minimum bend radius. This ladder rack is great for angling around corners and or obstacles. This product can attach to a cable ladder rack with an extension kit and should be bundled with Two-sided Hook and Loop Velcro Ties to not damage the cables. Product Quality The 90-degree cable ladder rack from DAMAC is an extremely versatile product,...

                    Inside Radius Bend Cable Ladder Rack

                    Price: $147.60-$159.62
                    View
                    Availability: In Stock
                    Primus Cable Item #: LR-D17-####-RBI -

                      Inside Bend Radius Cable Ladder Rack Primus Cable's Inside Bend Cable Ladder Rack is designed to raise or lower cable runs safely according to proper bend radius guidelines. A ladder rack system is a series of sections such as straight, radius bends, e-bends, and are designed to be adaptable, easy to install, and accommodate different room layouts. Product Quality This product is manufactured by DAMAC products who ensures you will receive a authentic product that is constructed from quality...

                      Outside Radius Bend Cable Ladder Rack

                      Price: $147.60-$159.62
                      View
                      Availability: In Stock
                      Primus Cable Item #: LR-D17-####-RBO -

                        Outside Bend Radius Cable Ladder Rack Primus Cable's Outside Bend Cable Ladder Rack is designed to raise or lower cable runs safely according to proper bend radius guidelines. A ladder rack system is a series of sections such as straight, radius bends, e-bends, and are designed to be adaptable, easy to install, and accommodate different room layouts. Product Quality This product is manufactured by DAMAC products who ensures you will receive a authentic product that is constructed from quality...

                        Cable Ladder Rack, 5 x 12"

                        Price: $59.62-$79.33
                        View
                        Availability: In Stock
                        Primus Cable Item #: LR-D17-####-LR -

                          Straight Section Cable Ladder Rack Primus Cable's Straight Cable Ladder Racks are designed to guide data cables along ceilings, walls, or raised floor applications. A ladder rack system is a series of sections such as straight, radius bends, e-bends, and are designed to be adaptable, easy to install, and accommodate different room layouts. Product Quality This product is manufactured by DAMAC products who ensures you will receive an authentic product that is constructed from quality materials...

                          Cableway™ Angled Corner Wire Tray Component, Cable Runway Support System

                          Price: $6.38
                          View
                          Availability: Min. Qty. Order
                          Arlington Item #: T23A -

                            Cable Runway Corner Primus Cable's Corner Cable Runway section is easy-to-install, offering time-saving benefits that decreases installation time and save you money. This corner angle measuring 9.28" x 2", is suitable for use with Arlington's CableWay™ runway raceway systems. This 90-Degree corner angle meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who is a leading manufacturer of quality electrical products, communication products,...

                            Cableway™ Cable Runway Coupler / Connector, Cable Runway Support System - Front

                            Price: $1.80
                            View
                            Availability: Min. Qty. Order
                            Arlington Item #: T23C -

                              Cable Runway Coupler / Connector Primus Cable's Coupler / Connector Cable Runway section is easy-to-install, offering time-saving benefits that decreases installation time and saves you money. This Coupler / Connector is used to attach Arlington's CableWay™ runway raceway sections together. This Coupler / Connector meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who is a leading manufacturer of quality electrical products, communication...

                              Cableway™ Cable Runway End Cap, Cable Runway Support System

                              Price: $1.37
                              View
                              Availability: Min. Qty. Order
                              Arlington Item #: T23E -

                                Cable Runway End Cap Primus Cable's Cable Runway End Cap is easy-to-install, offering time-saving benefits that decreases installation time and saves you money. This End Cap is used to cap off the end of Arlington's CableWay™ runway raceway sections. This End Cap meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who is a leading manufacturer of quality electrical products, communication products, home theater products, and more since 1949....

                                Cableway™ Cable Runway Flat Surface Support Bracket, Cable Runway Support System - Left

                                Price: $3.13
                                View
                                Availability: Min. Qty. Order
                                Arlington Item #: T23F -

                                  Cable Runway Support Bracket For Flat Surfaces Primus Cable's Cable Runway Support Bracket is designed to be installed on flat surfaces, offering time-saving benefits that decreases installation time and saves you money. This Flat Surface Bracket makes adding a support bracket to Arlington's CableWay™ cable runway systems as simple as attaching it to a surface such as a wooden beam and using a drill to secure the bracket to the surface. This Bracket meets UL E161207 and CSA standards. Product...

                                  Cableway™ Cable Runway Angled Support Bracket, Cable Runway Support System

                                  Price: $2.40
                                  View
                                  Availability: Min. Qty. Order
                                  Arlington Item #: T23H -

                                    Cable Runway Support Bracket Primus Cable's Cable Runway Support Bracket offers time-saving benefits that decreases installation time and saves you money. This Flat Surface Bracket makes adding a support bracket to Arlington's CableWay™ cable runway systems as simple as attaching it to a surface such as a wooden beam and using a drill to secure the bracket to the surface. This Bracket meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who...

                                    Cableway™ Cable Runway Support System

                                    Price: $8.09
                                    View
                                    Availability: Min. Qty. Order
                                    Arlington Item #: T23W -

                                      Cable Runway Wall Mount Primus Cable's Cable Runway Support Bracket is designed to be installed as a support bracket, offering time-saving benefits that decreases installation time and saves you money. This Surface Bracket makes adding a support bracket to Arlington's CableWay™ cable runway systems as simple as attaching it to a surface such as a wooden beam and using a drill to secure the bracket to the surface. This Bracket meets UL E161207 and CSA standards. Product Quality This product is...

                                      Cableway™ Cable Runway T Adaptor, Cable Runway Support System

                                      Price: $9.90
                                      View
                                      Availability: Min. Qty. Order
                                      Arlington Item #: T23T -

                                        Cable Runway T Adaptor Primus Cable's Cable Runway T Adaptor is designed to split a cable run into two separate directions, offering time-saving benefits that will decrease installation time and saves you money. This T Adaptor makes adding a new direction to Arlington's CableWay™ cable runway systems as simple as attaching it to a runway coupler. This Bracket meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who is a leading manufacturer...

                                        Cableway™ Cable Runway Support System

                                        Price: $18.89
                                        View
                                        Availability: In Stock
                                        Arlington Item #: T205 -

                                          5 ft. Cable Runway Straight Tray Primus Cable's Cable Runway Straight Tray offers time-saving benefits that decreases installation time and saves you money. This Straight Cable Runway Tray makes running a Arlington's CableWay™ cable runway system as simple as attaching it to a bracket and using a coupler to join sections together. This Straight Tray meets UL E161207 and CSA standards. Product Quality This product is manufactured by Arlington Industries who is a leading manufacturer of quality...

                                          Expandable Braided Sleeve Cable Sock 1/2", 1" & 2"

                                          Price: $6.79-$67.69
                                          View
                                          Availability: In Stock
                                          Primus Cable Item #: CT-####-### -

                                            Expandable Braided Sleeve Cable Sock Primus Cable's expandable cable sleeve offers durable protection and grouping of wires, with added protection this product is flame-retardant and halogen-free making it an environmentally-conscious product that reduces the use of toxic materials during the manufacturing process. Product Quality This Braided Sleeve expands to fit over connectors and is very flexible while offering resistance to abrasion as well as chemicals. Offering a great choice for use...

                                            Self Closing Expandable Braided Sleeve Cable Sock 1/2", 3/4" & 1"

                                            Price: $26.79-$39.99
                                            View
                                            Availability: In Stock
                                            Primus Cable Item #: NPNB-2209## -

                                              Self Closing Expandable Braided Sleeve Cable Sock Primus Cable's Self Closing Expandable Braided Sleeve Cable Socks offer an innovative solution for protecting cables. The removable nature of this product allows it to be installed after other necessary components. This product may also be referenced as Cable Snake Skin, Expandable Braided Sleeve and/or an Expandable Loom. Product Quality This product is flexible, when totally expanded, the sleeve can reach at least 1.5 times bigger than the...

                                              Wall Mount Slack Storage Bracket Sno-Shoe, Round, 24", Plastic

                                              Price: $123.49
                                              View
                                              Availability: Min. Qty. Order
                                              Primus Cable Item #: FB26-6256-24WM -

                                                Slack Storage Bracket Sno-Shoe®, 24", Plastic Primus Cable's Cable Runway Slack Storage Bracket Sno-Shoe® offers the ability to store slack cables effectively and efficiently. It is cheaper than buying additional cable and it allows for emergency repairs, growth and expansion, splicing and general maintenance. The Sno-Shoe® will ensure that correct installation practices are being carried out and will adhere to the bend radius of the cable. Product Quality This product is much more...

                                                7" Sno Shoe, Round, Plastic

                                                Price: $32.75-$40.99
                                                View
                                                Availability: Min. Qty. Order
                                                Primus Cable Item #: FB26-####-7 -

                                                  7" Plastic Snow-Show for vault and aerial Applications Primus Cable's Plastic Sno-Shoe® offers the ability to store slack cable effectively and efficiently. It is cheaper than buying additional cable and it allows for emergency repairs, growth and expansion, splicing and general maintenance. The Sno-Shoe® will ensure that correct installation practices are being carried out and will adhere to the bend radius of the cable. A storage unit is much more convenient than a vault or storage box as...

                                                  2" Standard J-Hook with Retainer Bar

                                                  Price: $1.69-$9.99
                                                  View
                                                  Availability: In Stock
                                                  Primus Cable Item #: JH1-66##-## -

                                                    3/4"-4" Standard J-Hook with Retainer Bar Primus Cable's Standard J-Hooks support up to 50 lbs and are perfect for hanging applications. This J-Hook is versatile and adheres to traditional J-Hook styling. This product can be attached to a wide variety of structures using beam clamps, clips and other support components. This support hook eliminates the problem of point loads that can cause bandwidth damage to sensitive cables such as fiber optic, CAT5E, CAT6, CAT7 and many others. Product...

                                                    Velcro Expandable Braided Sleeve Cable Sock 85mm x 2m

                                                    Price: $6.79
                                                    View
                                                    Availability: In Stock
                                                    Primus Cable Item #: CT-6265 -

                                                      Velcro Expandable Braided Sleeve Cable Sock 85mm x 2m Primus Cable's velcro closing braided wrap offers innovative solutions to the protection of breakout areas and also provides ease of removal when inspection or maintenance of cables is required. Product Quality This product is flexible, its open structure allows it to be installed after other necessary components. This product is also referenced as Cable Snake Skin, Expandable Braided Sleeving and Expandable Loom. Durability & Strength...

                                                      Xtender Pole™, 18 Telescoping Extension Pole

                                                      Price: $302.50
                                                      View
                                                      Availability: In Stock
                                                      Primus Cable Item #: JH-4481-18 -

                                                        Telescoping Extension Pole For Hanging Hardware 18 ft. Primus Cable's Telescoping Extension Pole is designed for professional contractors and low-voltage cable installers, offering an easy way to reach overhead installations. Using a Telescoping Extension Pole offers advantages when working from a floor and provides a safer way to reach areas that previously were dangerous or inaccessible by ladders, scaffolding, and scissor lifts including vaulted ceilings, over-stairwells, and through...

                                                        4" J-Hook with Angle Bracket

                                                        Price: $2.09-$5.99
                                                        View
                                                        Availability: In Stock
                                                        Primus Cable Item #: JH1-66##-##A -

                                                          90° Angle Bracket Attachment J-Hook with Retainer Bar 3/4"-4" Primus Cable's Standard J-Hooks support up to 50 lbs and are perfect for hanging applications. This J-Hook is versatile and adheres to traditional J-Hook styling. This support hook eliminates the problem of point loads that can cause band width damage to sensitive cables such as fiber optic, CAT5E, CAT6, CAT7 and many others. Product Quality This J-Hook is versatile and can be attached to a wide variety of structures,...

                                                          45 Degree Splice Kit for Cable Ladder Racks

                                                          Price: $28.39-$30.29
                                                          View
                                                          Availability: In Stock
                                                          Primus Cable Item #: LR-D17-####-SK -

                                                            Cable Ladder Rack Angled Splice Kit Primus Cable's Cable Ladder Rack Angled Splice Kit is used to splice a cable ladder rack run by 45 or 90-degree angles. This kit provides a smooth transition to cables without bending or kinking them. Splice kits give freedom and versatility when customizing a layout for a data center. This kit includes two 45 or 90-degree splice brackets and all hardware is included. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for...

                                                            Cable Ladder Rack Butt-Swivel Splice Kit

                                                            Price: $32.69
                                                            View
                                                            Availability: In Stock
                                                            Primus Cable Item #: LR-D17-4816-BSS -

                                                              Cable Ladder Rack Butt-Swivel Splice Kit Primus Cable's Swivel Splice Kit adjusts to virtually any angle making it easy to install cable ladder racks to each other. This product can splice cable runways vertically, horizontally or perpendicularly. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Butt-Swivel Splice Kits are constructed from quality...

                                                              5/8" Ceiling Bracket for Cable Ladder Racks

                                                              Price: $20.19
                                                              View
                                                              Availability: In Stock
                                                              Primus Cable Item #: LR-D17-4839-CB -

                                                                Cable Ladder Rack Ceiling Bracket 5/8" Primus Cable's Ceiling Bracket mounts are one of the few pieces needed to suspend cable ladder racks from a ceiling. This bracket secures to a ceiling, the remaining pieces needed are a 5/8" Rod, and Slotted Support Bracket. When complete this product allows cable runways to be managed high and away from network racks providing techs with easier access to equipment. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for...

                                                                5/8" Ceiling Support Kit with Rod for Cable Ladder Rack

                                                                Price: $48.56
                                                                View
                                                                Availability: In Stock
                                                                Primus Cable Item #: LR-D17-4807-CK -

                                                                  Ceiling Support Kit with 5/8" Rod Primus Cable's Ceiling Support Kits allow Cable Ladder Racks to suspend from the ceiling. This support kit allows cables to be managed high and away from network racks giving easier access to equipment. This Kit includes one Slotted Support Bracket, one ceiling support bracket and one 6' piece of 5/8" threaded rod with all needed hardware. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center...

                                                                  Elevation Kit, 2"-3", for Ladder Rack

                                                                  Price: $56.73-$59.62
                                                                  View
                                                                  Availability: In Stock
                                                                  Primus Cable Item #: LR-D17-####-EVK -

                                                                    Cable Ladder Rack Elevation Kit Primus Cable's Elevation Kits are used to increase the space between a cable ladder rack and server. This kit mounts using a Ladder-To-Rack Mount Plate on the base and also mounts to side stringers of a cable ladder rack. This kit has different elevation adjustments from 2" - 3" or 4" - 6". Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength...

                                                                    Butt Splice Kit for Cable Ladder Racks

                                                                    Price: $12.50
                                                                    View
                                                                    Availability: In Stock
                                                                    Primus Cable Item #: LR-D17-4809-BS -

                                                                      Cable Ladder Rack Extension Kit Primus Cable's Cable Ladder Rack Extension Kit is used to connect cable ladder racks together. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Extension Kits are constructed from quality materials, providing great durability and strength for a long service life. Below is an example of how this product is...

                                                                      Floor Support Kit with Rod for Cable Ladder Racks

                                                                      Price: $26.44
                                                                      View
                                                                      Availability: In Stock
                                                                      Primus Cable Item #: LR-D17-4812-FS -

                                                                        Floor Mounting Kit With Rods Primus Cable's Cable Ladder Rack Floor Mounting Kit With Rods allows a cable ladder racks to be anchored to the floor. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Floor Support Kits are constructed from structural steel that has a black powder coated finish. This product provides great durability and...

                                                                        12" Grounding Strap for Cable Ladder Racks

                                                                        Price: $28.37-$57.69
                                                                        View
                                                                        Availability: In Stock
                                                                        Primus Cable Item #: LR-D17-####-GS -

                                                                          Cable Ladder Grounding Strap Primus Cable's Cable Ladder Grounding Straps are used to create a solid ground connection between two pieces of cable ladder rack. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Grounding Strap includes one braided copper ground strap and all needed hardware. Installation requires drilling two holes for mounting. Grounding...

                                                                          Junction T Kit for Cable Ladder Racks

                                                                          Price: $12.50-$22.12
                                                                          View
                                                                          Availability: In Stock
                                                                          Primus Cable Item #: LR-D17-####-JTK -

                                                                            Junction T Kit Primus Cable's Cable Ladder Rack Junction T Kit is used to create a 90-degree junction splice between cable ladder racks. This kit provides cable runways the ability to change direction, enhancing the ability for cable runs to lead to and from many sources. All hardware is included with this purchase and note that the HD model does require drilling. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center...

                                                                            Junction-Swivel Splice Kit for Cable Ladder Racks

                                                                            Price: $32.69
                                                                            View
                                                                            Availability: In Stock
                                                                            Primus Cable Item #: LR-D17-4817-JSS -

                                                                              Junction-Swivel Splice Kit Primus Cable's Cable Ladder Rack Junction-Swivel Splice kits adjust to any angle making it easy to install cable ladder racks around existing obstacles. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Junction-Swivel Splice Kits are constructed from quality materials, providing great durability and strength...

                                                                              L-Bracket - Alternative Cable Ladder Rack

                                                                              Price: $13.46
                                                                              View
                                                                              Availability: In Stock
                                                                              Primus Cable Item #: LR-D17-1173-LB -

                                                                                Cable Ladder Rack L-Bracket Primus Cable's Cable Ladder L-Brackets add a secondary runway to existing cable ladder runs, allowing for the separation of harmful cables such as power cables from data cables. This product has a black anodized finish and includes hardware for installation. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's L-Brackets are...

                                                                                Movable Cross Member for Cable Ladder Racks

                                                                                Price: $56.73
                                                                                View
                                                                                Availability: In Stock
                                                                                Primus Cable Item #: LR-D17-4800-CM18 -

                                                                                  Movable Cable Ladder Rack Cross Member Primus Cable's Movable Cable Ladder Rack Cross Members aid in the prevention of sagging cables along a cable ladder rack. This product is extremely easy to use and only requires two screws for installation. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Movable Cable Ladder Rack Cross Members are constructed from...

                                                                                  End Caps for Cable Ladder Racks

                                                                                  Price: $6.25
                                                                                  View
                                                                                  Availability: In Stock
                                                                                  Primus Cable Item #: LR-D17-4803-EC -

                                                                                    Cable Ladder Rack End Caps Primus Cable's Cable Ladder Rack End Caps are rubberized end caps that cover the exposed ends of cable ladder racks. This product helps protect workers and equipment from exposed rack areas. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack End Caps are constructed from quality materials, providing great...

                                                                                    Cable Ladder Rack Retaining Post

                                                                                    Price: $19.23-$23.07
                                                                                    View
                                                                                    Availability: In Stock
                                                                                    Primus Cable Item #: NPNB-PLB##RP-3 -

                                                                                      Cable Ladder Rack Retaining Post Primus Cable's Cable Ladder Rack Retaining Posts increase the depth of cable runway systems to prevent cables from falling off. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Retaining Posts are constructed from quality materials, providing great durability and strength for a long service life. Below is...

                                                                                      5/8" Slotted Support Bracket for Cable Ladder Racks

                                                                                      Price: $10.10
                                                                                      View
                                                                                      Availability: In Stock
                                                                                      Primus Cable Item #: LR-D17-4842-SSB -

                                                                                        Slotted Support Bracket Primus Cable's Slotted Support brackets facilitate hanging cable ladder racks from a ceiling. This bracket secures to a cable ladder rack, the remaining pieces needed are a 5/8" Rod, and Ceiling Bracket. This product allows cable runways to be managed high and away from network racks providing techs with easier access to equipment. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure...

                                                                                        Stand-Off Bracket for Cable Ladder Racks

                                                                                        Price: $60.58
                                                                                        View
                                                                                        Availability: In Stock
                                                                                        Primus Cable Item #: LR-D17-4805-SO12 -

                                                                                          Cable Ladder Rack Stand-Off Support Bracket Primus Cable's Cable Ladder Rack Stand-Off Support Bracket facilitates the cascading of cables between cable ladder rack cross-members. This product is used for adding an additional cable runway system directly above, perpendicular or parallel to an existing runway system. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength...

                                                                                          Termination Kit for 12" Cable Ladder Racks

                                                                                          Price: $24.52-$28.37
                                                                                          View
                                                                                          Availability: In Stock
                                                                                          Primus Cable Item #: LR-D17-####-TK -

                                                                                            Cable Ladder Rack Termination Kit Primus Cable's Cable Ladder Rack Termination Kits offer a professional way to terminate cable runways. This product creates a smooth ending for cable runways, helping secure sharp ends and/or corners. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Junction-Swivel Splice Kits are constructed from...

                                                                                            Vertical-Swivel Splice Kit for Cable Ladder Racks

                                                                                            Price: $30.77
                                                                                            View
                                                                                            Availability: In Stock
                                                                                            Primus Cable Item #: LR-D17-4843-VS -

                                                                                              Cable Ladder Rack Vertical-Swivel Splice Kit Primus Cable's Vertical-Swivel Splice Kits adjust to virtually any angle making it easy to install cable runway vertically, horizontally or perpendicularly. This product can adjust to any angle, and is not limited to 45º or 90º. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Vertical-Swivel...

                                                                                              Wall Angle Bracket for 12" Cable Ladder Racks

                                                                                              Price: $26.44-$32.69
                                                                                              View
                                                                                              Availability: In Stock
                                                                                              Primus Cable Item #: LR-D17-####-WABK -

                                                                                                Cable Ladder Rack Wall Angle Bracket Primus Cable's Cable Ladder Rack Wall Angle Brackets function as wall supports and seismic bracing for cable ladder racks. This bracket is ideal for situations when a cable ladder rack ends at a wall. Product Quality This product is manufactured by DAMAC products, DAMAC has a reputation for providing excellent data center infrastructure equipment. Durability & Strength Primus Cable's Cable Ladder Rack Wall Angle Brackets are constructed from quality...

                                                                                                Wall Clamps for Cable Ladder Racks

                                                                                                Price: $20.19
                                                                                                View
                                                                                                Availability: In Stock
                                                                                                Primus Cable Item #: LR-D17-4822-WC -

                                                                                                  Wall Mount Hold Down Brackets for Cable Ladder Racks Wall Mounting Clamps are a quick and easy solution for attaching cable ladder racks to wall surfaces. These brackets are ideal for when cable ladder racks need to run horizontally or vertically along surrounding walls. This bracket is perfect for supporting cable ladder racks flush against the wall. This Kit only includes two mounting clamps. Does not include wall mounting hardware. Below is an example of how this product is used. ...