Description
Description
NetXpert XG2 10G Network Tester
The NetXpert XG2 can certify copper or fiber networks to 10G speeds using advanced Bit Error Rate Testing (BERT), pushing real data packets over the cable and measuring the results. This is real world testing, which proves the capabilities of new networks and helps to identify those older cable runs that can operate at higher speeds. The XG2 is also equipped with a full suite of active network tests and tools to speed network installs, including PoE testing and network testing over WiFi. The NetXpert XG2 is designed to be the one device that can perform all the tests you need during an install, simplifying and speeding up the process.
Our Primus Cable NetXpert XG2 Replacement Port Set and High Capacity Battery Kit are available to be purchased separately.
Features
Features
- Ethernet speed certification of copper and fiber optic systems up to 10Gb
- Complete active network testing over copper, fiber and Wifi systems
- Cable qualification to IEEE standards
- TDR & fiber cable length measurement
- PoE testing up to 90W (PoE++)
- Fiber Optic Kit includes Two Basic Kits
One Device to Handle All Your Testing Needs
- Full color 7" touchscreen in durable armored housing
- Convenient form factor with safety hand straps and built-in kickstand
- Powered by rechargeable lithium/ion battery pack with optional high-energy upgrade (p/n TXGBATX) or test on AC whille charging
- Field-replaceable RJ45 port, dual SFP+ ports, USB port
- Easy software updates over wifi or cable for future feature expansion
- Generate, document, log and export test reports in PDF, CSV, and XML formats
Copper Cable Testing
- Ethernet speed certification to 1/2.5/5/10G
- Cable qualification to 1/2.5/5/10G
- Pass/fail cable test results
- TDR cable length measurement
- Distance to opens and shorts
- TIA568A/B wiremap testing
- Tone generator
- Custom cable labeling
Active Network Testing
- Works with copper, fiber, or WiFi
- Ping to a specific IP or URL address
- Link light to identify location on a switch
- Verifies DHCP connectivity and DNS
- Discovers CDP and LLDP Protocols
- Network mapping & traceroute
- VLAN discovery
Fiber Optic Cable Testing
- Ethernet speed certification to 1/2.5/5/10G
- Cable qualification to 1/2.5/5/10G
- Pass/fail fiber cable test results
- Fiber cable length measurement
- Fiber loss measurement
- Livelight active transmission testing
- Optional microscope image testing
WiFi Testing
- Signal strength
- Internal, or external WiFi via a dongle
PoE Testing
- Load, current and voltage
- PSE & PD class detection
- PoE cable pairs
Specifications
| Length Measurement | Time Domain Reflectomoetry |
| Output Connections | 8- Position Shielded Modular Jack (Data) 2 x 10Gb SFP+ (Fiber) |
| Interfaces | USB Type A |
| Languages | EN, FR, ESP, DEU, ITA |
| Temperature | Operating: -10 to 60°C |
| Humidity | 10 to 90% non-condensing |
| Altitude | Operating: 10,000 Ft. (3,048m) |
| Power Supply | Input 100-240VAC, Output 12VDC 2.5A |
| Battery | Li-Ion, 7.8V 5500mAh - expected initial life 4hrs. typical at 1Gb speed |
| Enclosure | Rubber armored impact-resistant plastic |
| Size | Tester: 9.75 x 7 x 3" (245 x 177 x 73mm) Remote: 5.25 x 7 x 2.25" (130 x 177 x 55mm) |
| Weight | Tester: 2.65lbs. (1.2Kg) Remote: 1.3lbs. (0.6Kg) |
| Compliance | CE |
Additional Information
The First 10Gig Speed Certifier for Copper & Fiber with Wi-Fi Network Testing
Demand for data bandwidth increases about 30% per year, and more systems are changing to CAT6A to keep up. The NetXpert XG2 was designed to provide a powerful, complete testing solution for those CAT6A installs. Further, some – but not all – CAT6 and even CAT5e cable runs can handle the higher speed, but testing is needed to identify which ones. The XG2 makes it easy to discover those legacy cable runs that can support higher speeds and may not need to be replaced.
The NetXpert XG2 uses advanced Bit Error Rate Testing (BERT) to certify copper or fiber cables to 10G speeds. In addition, the XG2 includes a full array of network tests that can be run over copper, fiber, or wi-fi, as well as PoE testing and even tone generation for cable tracing. It is truly a do-it-all tester for the network cable installer that also produces full, easily-customized reports that can be delivered to the customer, proving the system can operate at the speed specified.
| Copper Cable Testing | |
Fiber Optic Cable Testing
Ping Testing
PoE Testing
Wi-Fi Signal Testing
What's in the Box?
What's in the Box?
NetXpert Basic Kit:- NetXpert XG2 Tester Main Unit
- XG2 Active Remote for Copper Cable Testing
- Two AC Chargers (tests can be run while charging)
- Two Shielded Cat6A Patch Cables
- Hard-shell Carrying Case
- Includes Two Basic Kits as above