#1 Source For Low Voltage Wire & Cable

(951) 824-1571

Hanging Hardware

Hanging Hardware Cable Management Solutions

Overhead cable management is another means of keeping networking cables organized and out of the way. Having a cable hanging system established helps maintain a clean and safe workspace. Primus Cable offers a wide assortment of hanging hardware for your cable management system including angle clips, beam clamps, drive rings, threaded rod couplers, and more.

We offer tools like the Xtender Pole™, 12' Telescoping Extension Pole to facilitate the process of installing cable hanging hardware. Professional contractors and installers can reach dangerous, hard to reach areas safely and efficiently with this tool. The Xtender pole installs hanging hardware like J-hooks, eye lag screws, ceiling wire, and threaded rods with ease, and all from the work floor. It has interchangeable heads for installing the hanging hardware of your cable management system.

A popular accessory to supplement your cable management system is the Hammer-On Beam Flange Clip, 1/2, w/ 1/4" Hole - 100 Pack. These beam flange clips allow you to attach hanging hardware like J-hooks with ease. It provides a portable ¼” hole for overhead cable management. It works well with Ethernet cable and fiber optic cable.

Primus Cable carries cable tie mounts to supplement your cable hanging system. The Rubber Adhesive Cable Tie Mount (0.74"/18.79mm & 0.99"/25.14mm) 100pk Natural & Black includes 100 cable tie mounts. These are ideal for vertical applications, and the four sided entry and center screw hole saves positioning time. The lead-n-feature funnels cable ties into position, and the countersunk screw hole allows cable tie to easily pass over the screw head.

Primus Cable selection of hanging hardware solutions includes a variety of J-hooks like the ever popular J-Hook, Standard Steel - 3/4" - 4". These install above suspended ceilings and below raised floors to route cables. J-hooks provide stress free cable support and our largest standard steel j-hooks support up to 50 pounds.

If you have any questions, feel free to give us a call. 951-824-1571

Products 1-43 of 43
Show
12 Xtender Pole™, Telescoping Extension Pole Platinum Tools JH712, Xtender Pole-12, drill extension

Price: $224.50
View
Availability: In Stock
Primus Cable Item #: JH-4480-12 -

    12' Xtender Pole™, Telescoping Extension Pole for Hanging Hardware The 12' Xtender Pole™, Telescoping Extension Pole allows professional contractors to safely install ceiling hardware from the ground level. Working from the floor provides a safer way to reach areas that previously were dangerous or inaccessible by ladders, scaffolding, and scissorlifts. This telescoping extension pole easily reaches vaulted ceilings, over stairwells, and through ceiling grids. This multi-purpose extension pole...

    Wedge Clamps for Aerial Cables, Multiple Sizes Available

    Price: $6.75-$7.50
    View
    Availability: In Stock
    Primus Cable Item #: WC-675#-2# -

      Aluminum Wedge Clamps For Aerial Cables Aluminum Wedge Clamps are used to reduce the strain of sagging overhead Aerial Cables. These Clamps need to be secured to a pole or Building using a Porcelain Wire Holder. Once secured the clamp loops through the Wire Holder and then can be locked into place. This Wedge Clamp is designed to feed Messenger Cables through them which, cinch down and tighten around them preventing slippage. The Messenger cable can then be tightened by a wench on the other...

      Wire Holders, Porcelain and Steel Reinforced, Heavy Duty,  2 1/4" Lag   Electrical Conduit, Electrical, Conduit, Service entrance caps, Mast, Wire Holders, Porcelain and Steel Reinforced, Heavy Duty,  2 1/4" Lag

      Price: CALL
      View
      Availability: Call for Pricing
      Primus Cable Item #: CD8-6054 -

        Wire Holders, Porcelain and Steel Reinforced, Heavy Duty, 2 1/4" Lag Wire Holders are used to secure wire before entering a Mast or Service Entrance Cap. Wire Holders are made of porcelain where they contact the wire to protect sheathing.

        Xtender Pole™, 18 Telescoping Extension Pole

        Price: $275.95
        View
        Availability: In Stock
        Primus Cable Item #: JH-4481-18 -

          18' Xtender Pole™, Telescoping Extension Pole for Hanging Hardware The 18' Xtender Pole™, Telescoping Extension Pole allows professional contractors to safely install ceiling hardware from the ground level. Working from the floor provides a safer way to reach areas that previously were dangerous or inaccessible by ladders, scaffolding, and scissorlifts. This telescoping extension pole easily reaches vaulted ceilings, over stairwells, and through ceiling grids. This multi-purpose extension pole...

          1/2" Magnetic Clamp, Black 1/2" Magnetic Clamp, cable support clamp, cable holding clamp, Magdaddy, Magnetic Clamp, wire management, cable management, Magnetic Clamp for cables,

          Price: $2.31
          View
          Availability: In Stock
          Mag Daddy Item #: CT-1820-MC -

            1/2" Magnetic Clamp, Black The 1/2" Magnetic Clamp utilizes triple plated nickel and copper magnet and premium quality plastic to support up to 26 pounds. Installs quickly, safely, and easily without drilling necessary. It is re-usable and plenum rated. Can install on wide variety of metallic surfaces.

            1/4-20 Female Magnet Screw Mount female magnet screw mount. 1/4-20 screw mount, magnetic screw mount, magdaddy, Magnetic screw mount, cable management,

            Price: $4.70
            View
            Availability: In Stock
            Mag Daddy Item #: JH-1817-FMM -

              1/4-20 Female Magnet Screw Mount This Female Magnet Screw Mount is a magnetic mounting unit for attaching magnetic J-Hooks and bridle rings without drilling. These units are safe and easy to install quickly.

              3" Eye Lag Screw, 1/4" Hole

              Price: $9.95
              View
              Availability: In Stock
              Primus Cable Item #: JH-4254-3ES -

                3" Eye Lag Screw, 1/4" Hole for Wood Applications This is a 3" long Eye Lag Screw with an 1/4" Eye Hole. Intended for wood installation of J-Hooks, hanging ceiling wire & jack chain, threaded rod or s-hooks. Our hardware is designed for the most efficient, secure and cost effective solution. These eye lag screws are intended for drilling into wooden surfaces. These Self-Tap Eye Lag Screws are easily installed by using the 12" or 18" Xtender Pole and Eye Lag Driver Adapter also available from...

                 Magnetic Cable Tie Mount, Small, Black

                Price: $1.74-$2.31
                View
                Availability: In Stock
                Mag Daddy Item #: CT-18##-### -

                  Magnetic Cable Tie Mounts The Magnetic Cable Tie Mount is designed for harsh environmental conditions. Installs quickly, easily, and safety to be used multiple times if necessary. No drilling or soldering required for installation. Manufactured of triple plated nickel and copper, this magnetic cable tie mount can rotate 360 degrees.

                  Magnetic Hook and Loop Holder magnetic hook and loop holder, magnetic cable holder, hook and loop holder, cable management, magnetic cable management,

                  Price: $2.31
                  View
                  Availability: In Stock
                  Mag Daddy Item #: CT-1818-HL -

                    Magnetic Hook and Loop Holder The Magnetic Hook and Loop Holder is designed to handle harsh conditions. It can sustain weight up to 26 pounds and can adhere to metallic surfaces many times. A 3/4" slot accommodates hook and loop cable ties for heavy duty cable support. The Magnetic Hook and Loop Holder can rotate up to 360 degrees and installs safely without drilling necessary.

                    Mini Magnetic Cable Tie Mount mini magnetic cable tie mount, mini cable tie mount, cable tie mount, Cable management, Magnetic Wire Management,

                    Price: $1.03
                    View
                    Availability: In Stock
                    Mag Daddy Item #: CT-1819-MM -

                      Mini Magnetic Cable Tie Mount The Mini Magnetic Cable Tie Mount is designed for harsh environmental conditions. Installs quickly, easily, and safely. They are also able to be used multiple times if necessary. It has a maximum strength of 9 pounds and can rotate 360 degrees.

                      2" Overall Self Drill Eye Lag Screw, 1/4" Hole & 3/4" Thread Length

                      Price: $27.67
                      View
                      Availability: In Stock
                      Primus Cable Item #: JH-4255-2ES -

                        2" Self-Tapping Eye Lag Screw for Sheet Metal Installation of J-Hooks This is a 2" Eye Lag Screw with an 1/4" Eye Hole and 3/4" Threaded length. Intended for sheet-metal installation of J-Hooks, hanging ceiling wire & jack chain, threaded rod or s-hooks. Our hardware is designed for the most efficient, secure and cost effective solution. These Self-Tap Eye Lag Screws are easily installed by using the 12" or 18" Xtender Pole and Eye Lag Driver Adapter also available from Primus Cable. We've got...

                        All Purpose Clip for 1/8" - 1/2" Flanges - Box of 100

                        Price: $109.12
                        View
                        Availability: In Stock
                        Primus Cable Item #: JH-4877 -

                          All Purpose Clip for 1/8" - 1/2" Flanges - Box of 100 Accommodates beam flange from 1/8" to 1/2" thickness, standard 1/4-20 or #10-24 threaded bridle rings, standard drive rings as well as unthreaded rings. This clip supports both drive rings and bridle rings. Easily installs, requires on a hammer.

                          Beam Clamp for 1/8" - 1/2" Flanges - Box of 100

                          Price: $91.85
                          View
                          Availability: In Stock
                          Primus Cable Item #: JH-4878 -

                            Beam Clamp for 1/8" - 1/2" Flanges - Box of 100 Hang ceiling wire & jack chain, threaded rod and eye lag screws with this beam clamp. Our hardware is designed for the most efficient, secure and cost effective hanging hardware solutions. These beam clamps easily install to beam flanges measuring up to 1/2." Supports 1/4" and 3/8" threaded rod.

                            Magnetic Cable Mounting Plates, White Magnetic Plates, Magnetic Mounting Bracket, Mounting Plate, Magnet Plate, Cable Mounting Plate, Cable Managment,

                            Price: $2.31
                            View
                            Availability: Min. Qty. Order
                            Mag Daddy Item #: NPNB-9760# -

                              Magnetic Mounting Plates, White These Magnetic Plates can be used universally on limitless various products. Mag Daddy's Plates save on both time and money making it an ideal cable management solution. The holes on the mounting plate allow for glue to ooze out, creating a rivet type bond, all while utilizing the power of rare earth magnets. The mounting plate is coated with 1.2″ x 2″ Polymer Base allowing for a more durability. This product is re-usable and has a high retention force making it...

                              Magnetic Cup Mounts, 16 lbs, 23 lbs, & 26 lbs Magnets, Magnetic Cup Mounts, Magnet Mounts, Cup Mounts,

                              Price: $1.58-$2.07
                              View
                              Availability: Min. Qty. Order
                              Mag Daddy Item #: NPNB-8200# -

                                These Magnetic Cup Mounts have a higher load rate and are available per request. Fits up to a 10-32 screw head and are ideal for hanging tools, metal picture frames, and so much more.

                                Corrosion-Resistant Galvanized Steel ½” DR Series Drive Rings Supports Wire Runs on Walls, Studs, Rafters

                                Price: $0.24-$0.46
                                View
                                Availability: In Stock
                                Arlington Item #: DR# -

                                  Corrosion-Resistant Galvanized Steel 1/2", 5/8", 7/8", & 1-1/4" Drive Rings for Walls, Studs, & Rafters: These new drive rings offer the fast, easy way to run electrical, SE, SEU and communications wire or cable on interior wood framing members or exterior walls. They are made of corrosion-resistant galvanized steel. The DR series drive rings provides sturdy support for wire and cable. They are available in four sizes (measured inside the loop) and they support a range of cable bundle sizes....

                                  Galvanized Braided Support Wire
                                  Spotlight!

                                  Price: $58.18-$69.09
                                  View
                                  Availability: In Stock
                                  Arlington Item #: BW### -

                                    Galvanized Braided Support Wire Arlington Braided Support Wire is galvanized and braided to insure that you get a quality hold. It is supplied in 500 ft rolls of ether 0.062” (1/8") or 0.08" (5/64") OD wire. Wire holds angular/static load up to 50 lbs. for the 0.062" (1/8") OD wire and 75 lbs. for the 0.08" (5/64") OD Wire. It is ideal for wet or dry locations and includes a UL listed rating.

                                    Magnetic Cable Holders

                                    Price: $1.74-$2.31
                                    View
                                    (1)
                                    Availability: In Stock
                                    Mag Daddy Item #: CT-18##-## -

                                      Magnetic Cable Holders The Black Magnetic Cable Holder saves both time and money as a cable management solution. Installs quickly and easily without drilling, utilizing the power of rare earth magnets. This magnetic cable holder is triple plated with nickel, copper, and nickel and coated with premium durable plastic. This product is re-usable and helps you save time on cable management installations. Where to use Magnetic Cable Holders: Steel Beams Purlins Ceiling Decks Drop Ceiling Channels...

                                      Magnetic Cable Holders, Pipe

                                      Price: $1.95
                                      View
                                      Availability: Min. Qty. Order
                                      Mag Daddy Item #: NPNB-6242# -

                                        Magnetic Cable Holders, Pipe These Magnetic Cable Holders are ideal for running wires along metal pipes and beams. Mag Daddy's Cable Holders save on both time and money as a cable management solution. Installs quickly and easily without drilling, utilizing the power of rare earth magnets. This magnetic cable holder can hold up to 16 lbs. and rotate 360° making it simple to customize you runs. This product is re-usable and extremely easy to use. So make running cable easier by harnessing the...

                                        Vertical Overhang Hanger 180° with 1/4" Hole

                                        Price: $56.08
                                        View
                                        Availability: In Stock
                                        Primus Cable Item #: JH-4245-180V -

                                          180° Vertical Overhang Hanger with 1/4" Hole The 180° Vertical Overhang Hanger is ideal for hanging ceiling wire and jack chains. It works well with threaded rods, eye lag screws, our line of J-Hooks and other cable management solutions. Use for overhead routing and management of CAT5, CAT6 or Fiber Optic cable.

                                          Threaded Screw Bridle Rings, 2" Low Carbon Steel

                                          Price: $1.14
                                          View
                                          Availability: In Stock
                                          Primus Cable Item #: JH-5009 -

                                            2" Bridle Ring for Beam Clamp, 1/4x20 Thread Support and secure your communication and other low voltage cables with this 2" diameter bridle ring. Simple, effective and constructed of solid, low carbon steel. Excellent for use with our Beam Clamps to help manage cables. The perfect choice for cable management made easy!

                                            Angled Overhang Hanger 45° with 1/4" Hole

                                            Price: $53.25
                                            View
                                            Availability: In Stock
                                            Primus Cable Item #: JH-4246-45O -

                                              45° Angled Overhang Hanger with 1/4" Hole The 45° Angled Overhang Hanger is ideal for suspending ceiling wire and jack chains. Keep your electrical wires and networking cables secure with our Angled Overhang Hanger. It not only makes your networking installation safer, but also keeps cables organized and tidy for maintenance technicians. The threaded and non-threaded holes accommodate threaded rods and eye lag screws. This angled overhang hanger works well with our line of J-Hooks and other...

                                               Angle Clip, 90° with 1/4" Hole, Powder-Actuated Pin

                                              Price: $21.58
                                              View
                                              Availability: In Stock
                                              Primus Cable Item #: JH-4253-PC -

                                                Angle Clip Right w/ Powder Actuated Nail This Right Angle Clip has a 1/4" Hole for hanging j-hooks, s-hooks, jack chain or wire for the purpose of suspending CAT5, CAT6 or Fiber Optic cable. The Angle Clip is installed with a Powder Actuated Nail for use in concrete for your J-Hook applications.

                                                Angle Clip, 90°, 1/4-20 Threaded Rod, 1/4" Hole

                                                Price: $83.25
                                                View
                                                Availability: In Stock
                                                Primus Cable Item #: JH-4249-FR -

                                                  Right Angle 1/4-20 Threaded Rod Clip w/ 1/4" Hole The Right Angle Threaded Rod Clip has a 1/4" Hole for overhead cable management of CAT5, CAT6 or Fiber Optic Cable. It is designed to provide the most cost effective, efficient, and secure cable management solution.

                                                  Angle Clip, 90°, 1/4-20 Threaded Rod, Powder Actuated Nail

                                                  Price: $22.50
                                                  View
                                                  Availability: In Stock
                                                  Primus Cable Item #: JH-4251-FR -

                                                    Right Angle Clip for 1/4-20 Threaded Rod, Powder Actuated Nail 1/4-20 Threaded Rod Right Angle Clip with Powder Actuated Nail installation. Great for overhead Cable Management of CAT5, CAT6 or Fiber Optic Cable. Mount the angle clip and add your threaded rod and j-hook attachments for a simple and easy solution to your cable routing problems. Powder Actuated Nail allows attachment of threaded rod and j-hooks into concrete with this Threaded Rod 90° Angle Clip. ...

                                                    Eye Lag Driver, 1/4" Hex - Universal

                                                    Price: $8.25
                                                    View
                                                    Availability: In Stock
                                                    Primus Cable Item #: JH-4256-ED -

                                                      Eye Lag Driver, 1/4" Hex - Universal This handy eye-lag screw drill adapter is used to drive eye lag screws with a power-drill. The Eye Lag Driver has a universal 1/4" Hex that fits inside any drill's chuck to mount hanging hardware into ceilings to install j-hooks, threaded rods, etc. for overhead routing and management of CAT5, CAT6 or Fiber Optic cable.

                                                       Hammer-On Beam Flange Clip, 1/2", w/ 1/4" Hole

                                                      Price: $46.33
                                                      View
                                                      Availability: In Stock
                                                      Primus Cable Item #: JH-4248-5/16H -

                                                        1/2" Hammer-On Beam Flange Clip with 1/4" Hole Attach j-hooks and other hanging hardware from beams that have 5/16-1/2" flanges. This Hammer-On Beam Clip provides a 'portable' 1/4" Hole for overhead routing and management of CAT5, CAT6 or Fiber Optic cable.

                                                        Hammer on Clip

                                                        Price: $46.33
                                                        View
                                                        Availability: In Stock
                                                        Primus Cable Item #: JH-4247-1/8H -

                                                          1/4" Hammer-On Beam Flange Clip with 1/4" Hole Attach j-hooks and other hanging hardware from beams that have 1/8-1/4" flanges. This Hammer-On Beam Clip provides a 'portable' 1/4" Hole for overhead routing and management of CAT5, CAT6 or Fiber Optic cable.

                                                           Magnetic Bridle Ring, 3/4", 1 1/4", 2" Sizes, 1/4-20 Thread

                                                          Was: $2.65
                                                          Sale: $2.48-$4.13
                                                          View
                                                          Availability: In Stock
                                                          Mag Daddy Item #: JH-18##-BRM -

                                                            Magnetic Bridle Rings The Magnetic Bridle Ring is the ideal cable management solution for low voltage wire and cable. Clean, safe, and efficient, the magnetic bridle ring installs from the safety of the ground utilizing an Xtender Pole. No drilling is required for installation. The 3/4" size magnetic bridle rings have a 10-24 machine thread. The 1 1/4" and 2" diameter loop sizes have a 1/4-20 machine thread. Suspend from: Steel Beams Purlins Ceiling Decks Drop Ceiling Channels Metal Joists...

                                                            Multi Function Clip, Bat Wing

                                                            Price: $48.95
                                                            View
                                                            Availability: In Stock
                                                            Primus Cable Item #: JH-4482-BW -

                                                              Multi Function Clip, Bat Wing The Multi-Function Clip-Bat Wing allows you to hang ceiling wire and jack chains with ease. It features high-quality all-steel construction, and can be powder-actuated with Bluepoint pin for fastening to concrete. Works with bridle rings, eye lag screws, and beam clamps.

                                                              Pressed Beam Clamp

                                                              Price: $0.99-$3.73
                                                              View
                                                              Availability: In Stock
                                                              Primus Cable Item #: JH-####-BC -

                                                                Pressed Beam Clamp Zinc-plated steel Pressed Beam Clamp for flanges up to 1/2" or 3/4" thick such as I-beams. Secure the Pressed Beam Clamp to a beam flange with the included bolt. The Pressed Beam Clamp is ideal for hanging ceiling wires. High quality all steel construction. Has both threaded and non-threaded holes to accommodate jack chain, ceiling wire, or threaded rod.

                                                                Threaded Screw Bridle Rings, 2" Low Carbon Steel

                                                                Price: $62.42-$93.63
                                                                View
                                                                Availability: Min. Qty. Order
                                                                Primus Cable Item #: NPNB-JH802-804 -

                                                                  Steel Bridle Rings for Beam Clamps, 10x24 Thread Support and secure your communication and other low voltage cables with this 3/4" or 2" diameter bridle ring. Simple, effective and constructed of solid, low carbon steel. Excellent for use with our Beam Clamps to help manage cables. The perfect choice for cable management made easy!

                                                                  Threaded Rod Male Coupler, ¼-20, 3/4" Metal Screw

                                                                  Price: $66.17
                                                                  View
                                                                  Availability: In Stock
                                                                  Primus Cable Item #: JH-4258-CS -

                                                                    1/4-20 Male Threaded Rod Couplers with 3/4" Sheet Metal Screws - 100 Pack Used for hanging ceiling wire & jack chain, and eye lag screws, this threaded rod coupler installs into sheet metal with the self-tapping screw - no need for a pilot hole. Once installed, add 1/4-20 threaded rod and j-hooks or other hanging hardware to complete your overhead network cable management solution. This hardware is designed for the most efficient, secure and cost effective solution. This is a 1/4-20 Threaded...

                                                                    Threaded Rod Male Coupler, 3/8-16 w/ 2" Wood Screw

                                                                    Price: $80.50
                                                                    View
                                                                    Availability: In Stock
                                                                    Primus Cable Item #: JH-4259-CS -

                                                                      3/8-16 Male Threaded Rod Coupler with 2" Wood Screw Used for hanging ceiling wire & jack chain, and eye lag screws, this Threaded Rod Coupler installs easily into wood or similar material. Once installed, add 3/8-16 threaded rod and j-hooks or other hanging hardware to complete your overhead network cable management solution. This hardware is designed for the most efficient, secure and cost effective solution. This is a 3/8-16 Threaded Rod Male Coupler with 2" Wood Screw intended for attaching...

                                                                      Threaded Rod Male Coupler, 3/8-16 w/ 3/4" Self-Tapping Sheet Metal Screw

                                                                      Price: $80.50
                                                                      View
                                                                      Availability: In Stock
                                                                      Primus Cable Item #: JH-4260-CS -

                                                                        3/8-16 Male Threaded Rod Coupler with 3/4" Sheet Metal Screw Used for hanging ceiling wire & jack chain, and eye lag screws, this threaded rod coupler installs into sheet metal with the self-tapping screw - no need for a pilot hole. Once installed, add 3/8-16 threaded rod and j-hooks or other hanging hardware to complete your overhead network cable management solution. This hardware is designed for the most efficient, secure and cost effective solution. This is a 3/8-16 Threaded Rod Male...

                                                                        Installation Tool for Vertical and Angles Overhang

                                                                        Price: $45.83
                                                                        View
                                                                        Availability: In Stock
                                                                        Primus Cable Item #: JH-4261-OT -

                                                                          Installation Tool for Vertical & Angled Overhang Clips This Vertical Overhang Installation Tool is designed to install Vertical and Angled overhead clips. Mount the Overhang Installer onto 1/2" conduit of appropriate length and you never have to leave the floor. You can even assemble your hanging hardware assembly on the ground and use this tool to install it all at once.

                                                                          Cable Hanging Tool for Magnetic J-Hooks and Bridle Rings wire cable tray, cable management, wire cable basket, beam clamp

                                                                          Price: $5.78
                                                                          View
                                                                          Availability: In Stock
                                                                          Mag Daddy Item #: TL10-1815 -

                                                                            Cable Hanging Tool for Magnetic Cable Management Hardware The Cable Hanging Tool is used to safely install magnetic cable management solutions like J-Hooks, bridle rings, and cable holder brackets. The tool can be attached to an extension pole to install cable management devices from the safety of the ground. Will fit with 1/4" rods or extension poles.

                                                                            Threaded Screw Bridle Rings, 1 1/4" Low Carbon Steel

                                                                            Price: $1.01
                                                                            View
                                                                            Availability: In Stock
                                                                            Primus Cable Item #: JH-5008 -

                                                                              1 1/4" Bridle Ring for Beam Clamp, 1/4x20 Thread, Low Carbon Steel Support and secure your communication and other low voltage cables with this 1 1/4" diameter bridle ring. Simple, effective and constructed of solid, low carbon steel. Excellent for use with our Beam Clamps to help manage cables. The perfect choice for cable management made easy!

                                                                              Female Hex Adapter, 1/4" Male Driver for Xtender Pole™ hex adapter, 1/4" male hex adapter

                                                                              Price: $18.95
                                                                              View
                                                                              Availability: In Stock
                                                                              Primus Cable Item #: JH-4484-MD -

                                                                                Female Hex Adapter, 1/4" Male Driver for Xtender Pole™ The Female Hex Adapter is designed for use with any 1/4" hex bit male driver. It is designed to work with the 12" or 18" Xtender pole, which is used for installing hanging hardware from a work floor.

                                                                                Hex Adapter, 3/8" Open End for Xtender Pole™ hex adapter, 1/4" male hex adapter

                                                                                Price: $17.48
                                                                                View
                                                                                Availability: In Stock
                                                                                Primus Cable Item #: JH-4487 -

                                                                                  Hex Adapter, 3/8" Open End for Xtender Pole™ This 3/8" Open End Hex Adapter is designed for the 12" or 18" Xtender Pole™. It is commonly used to install cable hanging hardware from the safety of the work floor.

                                                                                  Female Hex Adapter, 5/8" Open for Xtender Pole™ hex adapter, 1/4" male hex adapter

                                                                                  Price: $18.95
                                                                                  View
                                                                                  Availability: In Stock
                                                                                  Primus Cable Item #: JH-4485-HA -

                                                                                    Female Hex Adapter, 5/8" Open for Xtender Pole™ The Female Hex Adapter is designed to work with the 12" or 18" Xtender pole, which is used for installing hanging hardware from a work floor.

                                                                                    1/2" NPT Adapter for Xtender Pole™ hex adapter, 1/4" male hex adapter

                                                                                    Price: $17.48
                                                                                    View
                                                                                    Availability: In Stock
                                                                                    Primus Cable Item #: JH-4488 -

                                                                                      1/2" NPT Adapter for Xtender Pole™ The 1/2" NPT Adapter is designed to work with the 12" or 18" Xtender pole, which is used for installing hanging hardware from a work floor.

                                                                                      Drill Adapter Replacement for Xtender Pole™ hex adapter, 1/4" male hex adapter

                                                                                      Price: $32.95
                                                                                      View
                                                                                      Availability: In Stock
                                                                                      Primus Cable Item #: JH-4486-DA -

                                                                                        Drill Adapter Replacement for Xtender Pole™ The Drill Adapter Replacement is designed to work with the 12" or 18" Xtender pole, which is used for installing hanging hardware from a work floor.